4 layers128.5 × 40 mm
Scalenode cm4-baseboard
antmicro/scalenode-cm4-baseboard
Baseboard for Raspberry Pi 4 Compute Module optimized for clustering
146 parts152Apache-2.0
MB10S
MDDJLCPCB basic
-55℃~+150℃ 1.1V@400mA 1A 1kV 35A 5uA@1kV Single-Phase Rectifier MBS Bridge Rectifiers ROHS
- Part id
- mdd/MB10S-50MIL
- Category
- Bridge Rectifiers
- Package
- MBS
- Pins
- 4
- In stock
- 505,666 at JLCPCB (C2488)
- Used on
- 43 open-source boards
Overview
The MB10S is a bridge Rectifier made by MDD in a MBS package with 4 pins. -55℃~+150℃ 1.1V@400mA 1A 1kV 35A 5uA@1kV Single-Phase Rectifier MBS Bridge Rectifiers ROHS.
PCBKit's library has its KiCad symbol (MB10S:MB10S, from Antmicro) and its footprint (soic-4-w3-9mm:SOIC-4_W3.9mm, from Antmicro), ready for a KiCad board. 505,666 are in stock at JLCPCB (part C2488). 43 open-source boards in 25 repositories on GitHub use it.
Symbol
Footprint
From the datasheet
3- Forward current, most
- 1 A · maximum average forward rectified current at TC = 115 °C · p. 1
- Junction to air (MBS)
- 85 K/W · typical junction to ambient thermal resistance per leg · p. 1
- Junction to case (MBS)
- 25 K/W · typical junction to case thermal resistance per leg · p. 1
What it is and has
1- Rectifier type
- Single phase glass passivated bridge rectifier · p. 1
Specifications
7| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| Maximum average forward rectified current IF(AV) | TC = 115 °C; single phase half-wave 60 Hz, resistive or inductive load; derate current by 20% for capacitive load | max 1 A | 1 |
| Peak forward surge current IFSM | 8.3 ms single half sine-wave superimposed on rated load (JEDEC Method) | max 35 A | 1 |
| Rating for Fusing(t<8.3ms) I2t | t < 8.3 ms | max 5.08 A²s | 1 |
| Maximum DC reverse current IR | At rated DC blocking voltage; TA = 125 °C | max 40 uA | 1 |
| Typical junction capacitance per leg CJ | Measured at 1 MHz and applied reverse voltage of 4 V DC | typ 13 pF | 1 |
| Typical thermal resistance per leg RθJA | MBS; mounted on glass epoxy PC board with 4×1.5"×1.5" (3.81×3.81 cm) copper pad | typ 85 °C/W | 1 |
| Typical thermal resistance per leg RθJC | MBS; Note 2 | typ 25 °C/W | 1 |
- 8 layers118 × 100 mm
Kria k26-devboard
antmicro/kria-k26-devboard
Open source AMD Xilinx Kria UltraScale+ SoM baseboard
660 parts83Apache-2.0 - 6 layers100 × 70 mm
Sa800u baseboard hw
antmicro/snapdragon-845-baseboard
https://antmicro.com/blog/2022/04/open-source-snapdragon-845-baseboard/
616 parts70Apache-2.0 - 4 layers32.8 × 36.3 mm
Esp32
gdoor-org/gdoor
Wifi adapter and bus protocol documentation for the Gira TKS Door System
68 parts57GPL-3.0 - 4 layers100 × 75 mm
Freedo radio
CappyT/freedo
Local coordinator for tado V3+ heating devices, with a Home Assistant integration and add-on
135 parts33Apache-2.0 - 2 layers120.4 × 85.7 mm
ESPrinkler Retic PCB
slippery-carrot/ESPrinkler-Retic-Controller
8-Zone reticulation controller based on ESPHome for Home Assistant
142 parts6GPL-3.0 - 2 layers40 × 30 mm
- 4 layers99.7 × 99.7 mm
Diode tayloe sdr
SomethingFourier/SDR-Receiver
Super Heterodyne Direct Conversion Hybrid I/Q SDR Receiver
279 parts3
Parts like it
8
MB10S-10
MBS-55℃~+150℃ 1.1V@1A 1A 1kV 35A 5uA@1000V Single-Phase Rectifier MBS Bridge Rectifiers ROHSShandong Jingdao MicroelectronicsBridge RectifiersMB10S
SMD-4P-55℃~+150℃ 1.1V@0.5A 10uA 1A 1kV 30A Single-Phase Rectifier SMD-4P Bridge Rectifiers ROHSbaochengBridge RectifiersMB10S
MBSBridge RectifiershongjiachengMB10S
MBS-55℃~+150℃ 10uA@1kV 1A 1V@1A 1kV 35A Single-Phase Rectifier MBS Bridge Rectifiers ROHSJiangsu Changjing Electronics Technology (CJ)Bridge RectifiersMB10S-A
MBS-55℃~+150℃ 1A 1V@500mA 1kV 3A 5uA@1kV Single-Phase Rectifier MBS Bridge Rectifiers ROHSGOODWORKBridge RectifiersMB10SU
MBSBridge RectifiersDIYI Elec TechMB10S-10
MBSMBS Bridge Rectifiers ROHShongjiachengBridge RectifiersMB10S-50
MBS-55℃~+150℃ 1A 1V@1A 1kV 35A 5uA Single-Phase Rectifier MBS Bridge Rectifiers ROHSJUXINGBridge Rectifiers
Questions
Is there a KiCad symbol and footprint for the MB10S?
Yes. The symbol is MB10S:MB10S and the footprint soic-4-w3-9mm:SOIC-4_W3.9mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the MB10S?
MBS, with 4 pins. Its footprint is drawn on this page.
Where is the MB10S datasheet?
MDD publishes it: the Datasheet link on this page opens it.
Where can I order the MB10S?
JLCPCB lists it as part C2488, with 505,666 in stock; the sellers' links on this page open their listings.
What can replace the MB10S?
Parts like it in the library: the MB10S-10 by Shandong Jingdao Microelectronics, the MB10S by baocheng, the MB10S by hongjiacheng and the MB10S by Jiangsu Changjing Electronics Technology (CJ). Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the MB10S?
43 boards in 25 repositories on GitHub; the most starred are listed on this page, with their KiCad files.