

Hvac controller v2.1
Random kicad experiments
- Size
- 40 × 30 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 48
- Nets
- 59
- Pads
- 203
- Tracks, vias
- 0, 10
- Pours
- 9
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 5 Jun 2022
- Updated
- 16 Jun 2022
Overview
Hvac controller v2.1 is an open-source printed circuit board by kelvie, from the kelvie/kicads repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 40 × 30 mm with 48 parts on 59 nets.
It is built around the ESP32-C3-MINI-1, TPS5430DDA and LM324DT, with the SS34, 100UF/16V and MB10S among its other parts. Its parts include 16 resistors, 12 capacitors, 4 ICs, 3 diodes and 3 connectors. It belongs with the ESP32 and RISC-V boards of this library.
Main components
6ESP32-C3-MINI-1
--40℃~+81℃ -89dBm 2.4GHz 350mA 3V~3.6V 82mA ESP32-C3 Chip On-board PCB Antenna UART - WiFi Modules ROHSRF CrazyWiFi ModulesTPS5430DDA
ESOP-8-40℃~+125℃@(TJ) 1 1.221V~32.04V 3A 4.4mA 5.5V~36V 500kHz Adjustable Buck Buck Built-in No ESOP-8 DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersLM324DT
SOIC-14-15V~-1.5V、1.5V~15V 0℃~+70℃ 1.2mA 1.3MHz 20nA 300nA 30uV/℃ 3V~30V 4 400V/ms 40nV/√Hz@1kHz 5mV 70mA 80dB Built-in compensation SOIC-14 Operational Amplifier ROHSSTMicroelectronicsOperational AmplifierSS34
SMA(DO-214AC)-55℃~+125℃ 3A 40V 500uA@40V 550mV@3A Independent SMA(DO-214AC) Schottky Diodes ROHSMDDSchottky Diodes100UF/16V
C1812C1812 SMT ROHSJLCPCB AssemblyUncategorisedMB10S
MBS-55℃~+150℃ 1.1V@400mA 1A 1kV 35A 5uA@1kV Single-Phase Rectifier MBS Bridge Rectifiers ROHSMDDBridge Rectifiers
Parts
48| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | Hole | MountingHole:MountingHole_2.2mm_M2_DIN965_Pad | H1, H2, H3, H4 |
| 3 | 1.1k | Resistor_SMD:R_0402_1005Metric | R2, R3, R14 |
| 3 | 10k | Resistor_SMD:R_0402_1005Metric | R1, R8, R9 |
| 3 | 1uF/5V | Capacitor_SMD:C_0402_1005Metric | C2, C3, C4 |
| 3 | ToolingHole | kelvie:ToolingHole_1.152mm | H5, H6, H7 |
| 2 | 0.01uF | Capacitor_SMD:C_0402_1005Metric | C7, C8 |
| 2 | 0.1uF/16V | Capacitor_SMD:C_0402_1005Metric | C11, C12 |
| 2 | 10uF/50V | Capacitor_SMD:C_0805_2012Metric | C5, C6 |
| 2 | 18k | Resistor_SMD:R_0402_1005Metric | R10, R11 |
| 2 | 22uH | inductors:L_SXN_SMRH74-220MT | L1, L2 |
| 2 | 2k | Resistor_SMD:R_0402_1005Metric | R12, R13 |
| 2 | 33k | Resistor_SMD:R_0402_1005Metric | R4, R5 |
| 2 | 68k | Resistor_SMD:R_0402_1005Metric | R6, R7 |
| 2 | SS34 | Diode_SMD:D_SMA | D2, D3 |
| 2 | TPS5430DDA | Package_SO:TI_SO-PowerPAD-8_ThermalVias | U3, U4 |
| 1 | 0.01uF/16V | Capacitor_SMD:C_0402_1005Metric | C1 |
| 1 | 100uF/16V | Capacitor_Tantalum_SMD:CP_EIA-7343-31_Kemet-D | C9 |
| 1 | 270 | Resistor_SMD:R_0402_1005Metric | R17 |
| 1 | 470uF/6.3V | Capacitor_Tantalum_SMD:CP_EIA-7343-31_Kemet-D | C10 |
| 1 | 5.6k | Resistor_SMD:R_0402_1005Metric | R15 |
| 1 | BOOT | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
| 1 | Conn_01x06 | Connector_JST:JST_XH_B6B-XH-A_1x06_P2.50mm_Vertical | J2 |
| 1 | ESP32-C3-MINI-1 | Espressif:ESP32-C3-MINI-1 | U1 |
| 1 | LM324DT | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U2 |
| 1 | MB10S | Package_TO_SOT_SMD:TO-269AA | D1 |
| 1 | UART | Connector_Wire:SolderWire-0.1sqmm_1x03_P3.6mm_D0.4mm_OD1mm | J3 |
| 1 | VAC IN | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J1 |
More from kelvie/kicads
5- 2 layers50 × 36 mm

- 2 layers60.3 × 65 mm

- 2 layers52.5 × 95 mm

- 2 layers38 × 88 mm

- 2 layers30.5 × 25.4 mm

Similar boards
- 2 layers109.2 × 48.3 mm

- 2 layers121 × 75.5 mm

Jlctest
cjheath/jlcbasic
JLC Basic parts library for Kicad fetched and converted from EasyEDA
46 parts5 - 4 layers100 × 75 mm

Freedo radio
CappyT/freedo
Local coordinator for tado V3+ heating devices, with a Home Assistant integration and add-on
135 parts33Apache-2.0 - 2 layers120.4 × 85.7 mm

ESPrinkler Retic PCB
slippery-carrot/ESPrinkler-Retic-Controller
8-Zone reticulation controller based on ESPHome for Home Assistant
142 parts6GPL-3.0 - 2 layers54.5 × 73 mm

- 4 layers170 × 90 mm

- 2 layers97 × 97 mm

QO100 RX
barisdinc/N3B_SDR_Transceiver_HW
V/U/SHF and QO-100 SDR Transceiver Project
167 parts20GPL-3.0 - 2 layers80 × 130 mm

KuluckaMakinesi
emrah1982/KuluckaMakinesi
ESP32 tabanlı, 11 hayvan profili destekleyen çok evreli kuluçka kontrol sistemi. 3.2" TFT dokunmatik ekran, web arayüzü ve OTA güncelleme içerir.
61 parts
Questions
How big is the Hvac controller v2.1 PCB?
It measures 40 × 30 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Hvac controller v2.1 use?
48 parts, built around the ESP32-C3-MINI-1, TPS5430DDA, LM324DT and SS34. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Hvac controller v2.1 KiCad files?
From the kelvie/kicads repository on GitHub, at the commit this page was made from: the board is hvac-controller-v2.1/hvac-controller-v2.1.kicad_pcb and its schematic atom-fan-controller/atom-fan-controller.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Hvac controller v2.1 design in my own project?
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).