

RRFExtRP2040
DIY Duet3 Extension Board
- Size
- 100 × 95 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 92
- Nets
- 93
- Pads
- 329
- Tracks, vias
- 671, 110
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 21 Feb 2026
- Updated
- 30 Jul 2026
Overview
RRFExtRP2040 is an open-source printed circuit board by nyarurato, from the nyarurato/RRFExtRP2040Board repository on GitHub. It is a 2-layer board of 100 × 95 mm with 92 parts on 93 nets, routed with 671 tracks and 110 vias.
It is built around the MCP2542FD-E/SN, XL1509-5.0 and LTV-217D, with the AMS1117-3.3, MCP2518FD-E/SL and BAT54C among its other parts. Its parts include 30 resistors, 18 capacitors, 14 diodes, 9 connectors and 6 ICs. It belongs with the RP2040 boards of this library.
Main components
12MCP2542FD-E/SN
SOIC-8-40℃~+125℃ 1 15uA 4.5V~5.5V 70mA 8Mbps CAN FD Transceiver SOIC-8 CAN Transceivers ROHSMicrochip TechnologyCAN TransceiversXL1509-5.0
SOIC-8-40℃~+125℃ 1 150kHz 2A 2mA 4.5V~40V 5V Buck Buck Built-in Fixed No SOIC-8 DC-DC Converters ROHSUMWDC-DC ConvertersLTV-217D
SSOP-4SSOP-4 Transistor, Photovoltaic Output Optoisolators ROHSAOTETransistor, Photovoltaic Output OptoisolatorsAMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsMCP2518FD-E/SL
SOIC-14-40℃~+125℃ 2.7V~5.5V 20mA 8Mbps CAN FD Controller Monitor mode、Low-power mode、Programmable auto retransmission control SPI SOIC-14 CAN Controllers ROHSMicrochip TechnologyCAN ControllersBAT54C
SOT-231 Pair Common Cathode 200mA 2uA@25V 30V 600mA 800mV@100mA SOT-23 Schottky Diodes ROHSNexperiaSchottky DiodesAO3400A
SOT-23-55℃~+150℃ 1 N-channel 1.45V 1.4W 30V 48mΩ@2.5V 5.7A 50pF 630pF 75pF 7nC@10V N-Channel SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETsSM4007
MELFMELF Diodes - General Purpose ROHSYONGYUTAIDiodes - General PurposeSS34
SMA(DO-214AC)-55℃~+125℃ 3A 40V 500uA@40V 550mV@3A Independent SMA(DO-214AC) Schottky Diodes ROHSMDDSchottky DiodesB5819W
SOD-123-55℃~+125℃ 1.5A 1mA@40V 25A 40V 600mV@1A Standalone SOD-123 Schottky Diodes ROHSMDDSchottky DiodesESD2CAN24DBZRQ1
SOT-23-55℃~+150℃ 2 210W@8/20us 24V 35.5V 37V 3pF 5.7A@8/20us 50nA Bidirectional ESD IEC 61000-4-2 SOT-23 ESD and Surge Protection (TVS/ESD) ROHSTexas InstrumentsESD And Surge Protection (TVS/ESD)YSO110TR
SMD2520-4PSMD2520-4P Crystal Oscillators ROHSYXCCrystal Oscillators
README
README.mdRP2040 CAN IO Expansion Board
This is a CAN-connected I/O expansion board for Duet3 (RepRapFirmware) using the RP2040 and MCP2518FD. The circuit design was heavily inspired by the Duet3 Mainboard 6HC and the Fly-RRF-36.
RP2040 CAN IO Expansion Board
RP2040 + MCP2518FD を使用した、Duet3 (RepRapFirmware) 向けの CAN 接続 IO 拡張基板です。 回路設計はDuet3 Mainboard 6HCとFly-RRF-36を大いに参考にしました。
v0.1


v0.2


firmware
以下のRP2040 & MCP2517対応のDuet3Expansionフォークを使う
https://github.com/gloomyandy/Duet3Expansion
Parts
92| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 100nF | Capacitor_SMD:C_0603_1608Metric | C1, C2, C3, C4, C9, C11, C12 |
| 6 | 10uF | Capacitor_SMD:C_0805_2012Metric | C6, C10, C13, C14, C15, C18 |
| 5 | 27K | Resistor_SMD:R_0603_1608Metric | R3, R6, R8, R10, R12 |
| 5 | 470R | Resistor_SMD:R_0603_1608Metric | R13, R14, R15, R16, R17 |
| 5 | 4K7 0.25W | Resistor_SMD:R_1206_3216Metric | R4, R5, R7, R9, R11 |
| 5 | Conn_01x05_Pin | Connector_Molex:Molex_KK-254_AE-6410-05A_1x05_P2.54mm_Vertical | J2, J3, J4, J5, J6 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | 390R | Resistor_SMD:R_0603_1608Metric | R21, R24, R27 |
| 3 | 4K7 | Resistor_SMD:R_0603_1608Metric | R18, R22, R30 |
| 3 | BAT54C | Package_TO_SOT_SMD:SOT-23 | D1, D2, D3 |
| 3 | LED | LED_SMD:LED_0603_1608Metric | D5, D7, D9 |
| 2 | 100uF | Capacitor_SMD:C_1206_3216Metric | C16, C17 |
| 2 | 10K | Resistor_SMD:R_0805_2012Metric | R25, R29 |
| 2 | 10uF | Capacitor_Tantalum_SMD:CP_EIA-3216-18_Kemet-A | C7, C19 |
| 2 | 2.2K | Resistor_SMD:R_0603_1608Metric | R26, R28 |
| 2 | 60R | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 2 | AO3400A | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 2 | G5Q-EL3-DC24V | Relay_THT:Relay_SPST_Omron-G5Q-1A | K1, K2 |
| 2 | LED | LED_SMD:LED_0805_2012Metric | D4, D6 |
| 2 | LTV-217 | Library:LTV217 | U5, U6 |
| 2 | SM4007 | Diode_SMD:D_SOD-123F | D13, D14 |
| 2 | SS34 | Diode_SMD:D_SMA | D8, D10 |
| 2 | SolderJumper_2_Bridged | Jumper:SolderJumper-2_P1.3mm_Bridged_Pad1.0x1.5mm | JP1, JP2 |
| 1 | 10K | Resistor_SMD:R_1206_3216Metric | R19 |
| 1 | 15K | Resistor_SMD:R_0603_1608Metric | R20 |
| 1 | 4.7nF | Capacitor_SMD:C_0603_1608Metric | C8 |
| 1 | 47K | Resistor_SMD:R_0603_1608Metric | R23 |
| 1 | 68uh | Library:IND-SMD_L7.2-W6.6_GPSR07X0 | L1 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U4 |
| 1 | B5819W | Diode_SMD:D_SOD-123 | D11 |
| 1 | Conn_01x02_Pin | Connector_Molex:Molex_KK-254_AE-6410-02A_1x02_P2.54mm_Vertical | J9 |
| 1 | Conn_01x02_Pin | Connector_JST:JST_VH_B2P-VH-B_1x02_P3.96mm_Vertical | J1 |
| 1 | ESD2CAN24DBZRQ1 | Package_TO_SOT_SMD:SOT-23-3 | D12 |
| 1 | Fuse 1A | Fuse:Fuse_1206_3216Metric | F1 |
| 1 | MCP2518FD-E/SL | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U2 |
| 1 | MCP2542FD-E/SN | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | RJ11 | Library:615006138421 | J7 |
| 1 | RaspberryPi_Pico | Module:RaspberryPi_Pico_Common_Unspecified | A1 |
| 1 | SW_Push | Button_Switch_SMD:SW_Push_1P1T_XKB_TS-1187A | SW1 |
| 1 | Screw_Terminal_01x04 | Library:HB9500-9.5-4P | J8 |
| 1 | XL1509-5.0 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U7 |
| 1 | YSO110TR | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y2 |
Similar boards
- 2 layers36.6 × 63.6 mm

- 4 layers50 × 40 mm

Llm kicad
fgihl/usb-c-one
Small one port USB-C hub, similar to YKUSH XS, but uses USB-C connectors
100 parts - 2 layers120.4 × 85.7 mm

ESPrinkler Retic PCB
slippery-carrot/ESPrinkler-Retic-Controller
8-Zone reticulation controller based on ESPHome for Home Assistant
142 parts6GPL-3.0 - 2 layers93.9 × 84 mm

- 2 layers48 × 48 mm

- 4 layers100 × 100 mm

- 4 layers103.5 × 48.3 mm

ButtonBd2
frc971/electrical
This repo contains the electrical files for the 971 FRC team. The files include PCBs and the electrical system diagrams. The PCBs are created using KiCad.
165 parts3Apache-2.0 - 4 layers70 × 90 mm

Questions
How big is the RRFExtRP2040 PCB?
It measures 100 × 95 mm and has 2 copper layers, 1.6 mm thick.
What parts does the RRFExtRP2040 use?
92 parts, built around the MCP2542FD-E/SN, XL1509-5.0, LTV-217D and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the RRFExtRP2040 KiCad files?
From the nyarurato/RRFExtRP2040Board repository on GitHub, at the commit this page was made from: the board is RRFExtRP2040.kicad_pcb and its schematic RRFExtRP2040.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the RRFExtRP2040 design in my own project?
Its repository states no licence, so its author keeps all rights: ask nyarurato before reusing the design.