Skip to the content
12345678

MCP2542FD-E/SN

Microchip TechnologyExtended

-40℃~+125℃ 1 15uA 4.5V~5.5V 70mA 8Mbps CAN FD Transceiver SOIC-8 CAN Transceivers ROHS

Part id
microchip/MCP2542FD-E/SN
Category
CAN Transceivers
Package
SOIC-8
Pins
8
In stock
569 at JLCPCB (C220598)
Used on
6 open-source boards

Overview

The MCP2542FD-E/SN is a CAN Transceiver made by Microchip Technology in a SOIC-8 package with 8 pins. -40℃~+125℃ 1 15uA 4.5V~5.5V 70mA 8Mbps CAN FD Transceiver SOIC-8 CAN Transceivers ROHS.

PCBKit's library has its KiCad symbol (Celestial_Interface_CAN:MICROCHIP MCP2542FD, from Altium's library) and its footprint (Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, from KiCad's library), ready for a KiCad board. 569 are in stock at JLCPCB (part C220598). 6 open-source boards in 5 repositories on GitHub use it.

Symbol

1TXD2VSS3VDD5VIO8STBY4RXD7CANH6CANL
Celestial_Interface_CAN:MICROCHIP MCP2542FDFrom Altium's library

Footprint

12345678
Package_SO:SOIC-8_3.9x4.9mm_P1.27mmFrom KiCad's library

From the datasheet

12
Supply, least
4.5 V · VDD, recommended operating min · p. 13
Supply, most
5.5 V · VDD, recommended operating max · p. 13
Supply, least
1.7 V · VIO, recommended operating min · p. 13
Supply, absolute maximum
7 V · VDD, absolute max · p. 12
Works from
-40 °C · Extended (E), specified ambient min · p. 1
Works up to
125 °C · Extended (E), specified ambient max · p. 1
Junction, hottest
190 °C · Virtual junction temperature, absolute max · p. 12
Takes working
55.2 mA · sum of VDD and VIO dominant supply currents, typical · p. 13
Takes at most
70.4 mA · sum of VDD and VIO dominant supply currents, max · p. 13
Takes asleep
4 µA · Standby, bus recessive, includes IIO, typical · p. 13
Data rate, most
8 Mbit/s · Nominal bit rate, max · p. 17
Junction to air (8LD SOIC)
149.5 K/W · Junction to ambient, typical · p. 22

What it is and has

11
CAN FD data rates
2, 5 and 8 Mbps · p. 1
Maximum propagation delay
120 ns · p. 1
Loop delay symmetry
-10%/+10% at 2 Mbps · p. 1
Wake-up
CAN activity, 3.6 µs filter time · p. 1
Protection
Automatic thermal shutdown · p. 1
Protection
Permanent dominant detection on TXD · p. 1
Protection
Permanent dominant detection on bus · p. 1
System compatibility
12V and 24V systems · p. 1
Temperature grade
Extended (E): -40°C to +125°C · p. 1
CAN FD operation
2, 5 and 8 Mbps · p. 1
Loop delay symmetry
-10%/+10% (2 Mbps) · p. 1

Specifications

129
ParameterConditionsAs printedPage
VDD VDDmax 7 V12
VIO VIOmax 7 V12
DC Voltage at TXD, RXD, STBY and VSSMaximum: VIO + 0.3Vmin -0.3 V12
DC Voltage at CANH and CANLmin -58 · max 58 V12
Transient Voltage on CANH and CANLISO-7637; Figure 2-5min -150 · max 100 V12
Differential Bus Input Voltage VDIFF(I)t = 60 days, continuousmin -5 · max 10 V12
Differential Bus Input Voltage VDIFF(I)1000 pulses, t = 0.1 ms, VCANH = +18Vmax 17 V12
Dominant State Detection VDIFF(I)10000 pulses, t = 1 msmax 9 V12
Storage temperaturemin -55 · max 150 °C12
Operating ambient temperaturemin -40 · max 150 °C12
Virtual Junction Temperature TVJIEC60747-1min -40 · max 190 °C12
Soldering temperature of leads10 secondsmax 300 °C12
ESD protection on CANH and CANL pinsIEC 61000-4-2min -13 · max 13 kV12
ESD protection on CANH and CANL pinsIEC 801; Human Body Modelmin -8 · max 8 kV12
ESD protection on all other pinsIEC 801; Human Body Modelmin -4 · max 4 kV12
ESD protection on all pinsIEC 801; Machine Modelmin -400 · max 400 V12
ESD protection on all pinsIEC 801; Charge Device Modelmin -750 · max 750 V12
Voltage Range VDDVDD Pinmin 4.5 · max 5.5 V13
Supply Current IDDRecessive; VTXD = VDDtyp 2.5 · max 5 mA13
Supply Current IDDDominant; VTXD = 0Vtyp 55 · max 70 mA13
Standby Current IDDSMCP2542FD and MCP2542WFD, Includes IIO; Bus Recessivetyp 4 · max 16 uA13
Maximum Supply Current IDDMAXFault condition: VTXD = VSS; VCANH = VCANL = -5V to +18V (Note 1)typ 95 · max 140 mA13
High Level of the POR Comparator for VDD VPORHNote 1typ 3 · max 3.95 V13
Low Level of the POR Comparator for VDD VPORLNote 1min 1 · typ 2 · max 3.2 V13
Hysteresis of POR Comparator for VDD VPORDNote 1min 0.2 · typ 0.9 · max 2 V13
High Level of the UV Comparator for VDD VUVHmin 4 · typ 4.25 · max 4.4 V13
Low Level of the UV Comparator for VDD VUVLmin 3.6 · typ 3.8 · max 4 V13
Hysteresis of UV comparator VUVDNote 1typ 0.4 V13
Digital Supply Voltage Range VIOVIO Pinmin 1.7 · max 5.5 V13
Supply Current on VIO IIORecessive; VTXD = VIOtyp 7 · max 20 uA13
Supply Current on VIO IIODominant; VTXD = 0Vtyp 200 · max 400 uA13
Standby Current IDDSVIO Pin; Bus Recessive (Note 1)typ 0.3 · max 2 uA13
High Level of the POR Comparator for VIO VPORH_VIOmin 0.8 · typ 1.2 · max 1.7 V13
Low Level of the POR Comparator for VIO VPORL_VIOmin 0.7 · typ 1.1 · max 1.4 V13
Hysteresis of POR Comparator for VIO VPORD_VIOtyp 0.2 V13
CANH; CANL: Recessive Bus Output Voltage VO(R)VTXD = VDD; No load; typical = 0.5 VDDmin 2 · max 3 V13
CANH; CANL: Bus Output Voltage in Standby VO(S)STBY = VTXD = VDD; No loadmin -0.1 · typ 0 · max 0.1 V13
Recessive Output Current IO(R)-24V < VCAN < +24Vmin -5 · max 5 mA14
CANH: Dominant Output Voltage VO(D)TXD = 0; RL = 50 to 65min 2.75 · typ 3.5 · max 4.5 V14
CANL: Dominant Output Voltage VO(D)TXD = 0; RL = 50 to 65min 0.5 · typ 1.5 · max 2.25 V14
Driver Symmetry (VCANH+VCANL)/VDD VSYM1 MHz square wave, Recessive and Dominant states, and transition (Note 1)min 0.9 · typ 1 · max 1.1 V14
Dominant: Differential Output Voltage VO(DIFF)(D)VTXD = VSS; RL = 50 to 65; Figure 2-2, Figure 2-4, Section 3.0 (Note 1)min 1.5 · typ 2 · max 3 V14
Dominant: Differential Output Voltage VO(DIFF)(D)VTXD = VSS; RL = 45 to 70; Figure 2-2, Figure 2-4, Section 3.0 (Note 1)min 1.4 · typ 2 · max 3.3 V14
Dominant: Differential Output Voltage VO(DIFF)(D)VTXD = VSS; RL = 40 to 75; Figure 2-2, Figure 2-4min 1.3 · typ 2 · max 3.3 V14
Dominant: Differential Output Voltage VO(DIFF)(D)VTXD = VSS; RL = 2240; Figure 2-2, Figure 2-4, Section 3.0 (Note 1)min 1.5 · max 5 V14
Recessive: Differential Output Voltage VO(DIFF)(R)VTXD = VDD, no load, Normal; Figure 2-2, Figure 2-4min -500 · typ 0 · max 50 mV14
Recessive: Differential Output Voltage VO(DIFF)(S)VTXD = VDD, no load, Standby; Figure 2-2, Figure 2-4min -200 · typ 0 · max 200 mV14
CANH: Short-Circuit Output Current IO(SC)VTXD = VSS; VCANH = -3V; CANL: floatingmin -115 · typ -85 mA14
CANL: Short Circuit Output Current IO(SC)VTXD = VSS; VCANL = +18V; CANH: floatingtyp 75 · max 115 mA14
Recessive Differential Input Voltage VDIFF(R)(I)Normal Mode; -12V < V(CANH, CANL) < +12V; see Figure 2-6 (Note 3)min -4 · max 0.5 V14
Recessive Differential Input Voltage VDIFF(R)(I)Standby Mode; -12V < V(CANH, CANL) < +12V; see Figure 2-6 (Note 3)min -4 · max 0.4 V14
Dominant Differential Input Voltage VDIFF(D)(I)Normal Mode; -12V < V(CANH, CANL) < +12V; see Figure 2-6 (Note 3)min 0.9 · max 9 V14
Dominant Differential Input Voltage VDIFF(D)(I)Standby Mode; -12V < V(CANH, CANL) < +12V; see Figure 2-6 (Note 3)min 1.1 · max 9 V14
Differential Receiver Threshold VTH(DIFF)Normal Mode; -12V < V(CANH, CANL) < +12V; see Figure 2-6 (Note 3)min 0.5 · typ 0.7 · max 0.9 V15
Differential Receiver Threshold VTH(DIFF)Standby Mode; -12V < V(CANH, CANL) < +12V; see Figure 2-6 (Note 3)min 0.4 · typ 0.7 · max 0.9 V15
Differential Input Hysteresis VHYS(DIFF)Normal mode, see Figure 2-6 (Note 1)min 30 · max 200 mV15
Single Ended Input Resistance RCAN_H, RCAN_LNote 1min 6 · max 50 k15
Internal Resistance Matching mRVCANH = VCANL (Note 1); mR=2*(RCANH-RCANL)/(RCANH+RCANL)min -3 · typ 0 · max 3 %15
Differential Input Resistance RDIFFNote 1min 12 · typ 25 · max 100 k15
Internal Capacitance CIN1 Mbps (Note 1)typ 20 pF15
Differential Internal Capacitance CDIFF1 Mbps (Note 1)typ 10 pF15
CANH, CANL: Input Leakage ILIVDD = VTXD = VSTBY = 0V; MCP2542FD and MCP2542WFD, VIO = 0V; VCANH = VCANL = 5 Vmin -5 · max 5 uA15
Low-Level Input Voltage VILMCP2542FD and MCP2542WFD; TXD, STBY; max = 0.3VIOmin -0.3 V15
High-Level Input Current IIHTXD, STBYmin -1 · max 1 uA15
TXD: Low-Level Input Current IIL(TXD)min -270 · typ -150 · max -30 uA15
STBY: Low-Level Input Current IIL(STBY)min -30 · max -1 uA15
Low-Level Output Voltage VOLRXD; IOL = 4 mA; typical 8 mAmax 0.4 V16
Shutdown Junction Temperature TJ(SD)-12V < V(CANH, CANL) < +12V (Note 1)min 165 · typ 175 · max 185 °C16
Shutdown Temperature Hysteresis TJ(HYST)-12V < V(CANH, CANL) < +12V (Note 1)min 15 · max 30 °C16
Bit Time tBITmin 0.125 · max 69.44 us17
Nominal Bit Rate NBRmin 14.4 · max 8000 kbps17
Delay TXD Low to Bus Dominant tTXD-BUSONNote 1typ 50 · max 85 ns17
Delay TXD High to Bus Recessive tTXD-BUSOFFNote 1typ 40 · max 85 ns17
Delay Bus Dominant to RXD tBUSON-RXDNote 1typ 70 · max 85 ns17
Delay Bus Recessive to RXD tBUSOFF-RXDNote 1typ 110 · max 145 ns17
Propagation Delay TXD to RXD tTXD - RXDWorst Case of tLOOP(R) and tLOOP(F), Figure 2-10; RL = 60, CL = 100 pFtyp 90 · max 120 ns18
Propagation Delay TXD to RXD tTXD - RXDWorst Case of tLOOP(R) and tLOOP(F), Figure 2-10; RL = 150, CL = 200 pF (Note 1)typ 115 · max 150 ns18
Propagation Delay, Rising Edge tLOOP(R)typ 90 · max 120 ns18
Propagation Delay, Falling Edge tLOOP(F)typ 80 · max 120 ns18
Recessive Bit Time on RXD – 1 Mbps, Loop Delay Symmetry tBIT(RXD), 1MtBIT(TXD) = 1000 ns (Figure 2-10); RL = 60, CL = 100 pF (Note 2)min 900 · typ 985 · max 1100 ns18
Recessive Bit Time on RXD – 1 Mbps, Loop Delay Symmetry tBIT(RXD), 1MtBIT(TXD) = 1000 ns (Figure 2-10), RL = 150, CL = 200 pF (Notes 1, 2)min 800 · typ 960 · max 1255 ns18
Recessive Bit Time on RXD – 2 Mbps, Loop Delay Symmetry tBIT(RXD), 2MtBIT(TXD) = 500 ns (Figure 2-10); RL = 60, CL = 100 pFmin 450 · typ 490 · max 550 ns18
Recessive Bit Time on RXD – 2 Mbps, Loop Delay Symmetry tBIT(RXD), 2MtBIT(TXD) = 500 ns (Figure 2-10), RL = 150, CL = 200 pF (Note 1)min 400 · typ 460 · max 550 ns18
Recessive Bit Time on RXD – 5 Mbps, Loop Delay Symmetry tBIT(RXD), 5MtBIT(TXD) = 200 ns (Figure 2-10)min 160 · typ 190 · max 220 ns18
Recessive Bit Time on RXD – 8 Mbps, Loop Delay Symmetry tBIT(RXD), 8MtBIT(TXD) = 120 ns (Figure 2-10) (Notes 1, 2)min 85 · typ 100 · max 135 ns18
CAN Activity Filter Time (Standby) tFILTERVDIFF(D)(I) = 1.2V to 3Vmin 0.5 · typ 1.7 · max 3.6 us18
Delay Standby to Normal Mode tWAKENegative edge on STBYtyp 7 · max 30 us18
Permanent Dominant Detect Time tPDTTXD = 0Vmin 0.8 · typ 1.9 · max 5 ms18
Permanent Dominant Timer Reset tPDTRThe shortest recessive pulse on TXD or CAN bus to reset Permanent Dominant Timertyp 5 ns18
Transmitted Bit Time on Bus – 1 Mbps tBIT(BUS), 1MtBIT(TXD) = 1000 ns (Figure 2-10); RL = 60, CL = 100 pF (Note 2)min 870 · typ 1000 · max 1060 ns18
Transmitted Bit Time on Bus – 1 Mbps tBIT(BUS), 1MtBIT(TXD) = 1000 ns (Figure 2-10), RL = 150, CL = 200 pF (Notes 1, 2)min 870 · typ 1000 · max 1060 ns18
Transmitted Bit Time on Bus – 2 Mbp tBIT(BUS), 2MtBIT(TXD) = 500 ns (Figure 2-10); RL = 60, CL = 100 pFmin 435 · typ 515 · max 530 ns19
Transmitted Bit Time on Bus – 2 Mbp tBIT(BUS), 2MtBIT(TXD) = 500 ns (Figure 2-10), RL = 150, CL = 200 pF (Note 1)min 435 · typ 480 · max 550 ns19
Transmitted Bit Time on Bus – 5 Mbps tBIT(BUS), 5MtBIT(TXD) = 200ns (Figure 2-10) (Note 1)min 155 · typ 200 · max 210 ns19
Transmitted Bit Time on Bus - 8Mbps tBIT(BUS), 8MtBIT(TXD) = 120 ns (Figure 2-10) (Notes 1, 2)min 100 · typ 125 · max 140 ns19
Receiver Timing Symmetry – 1 Mbps tDIFF(REC), 1MtBIT(TXD) = 1000 ns (Figure 2-10); RL = 60, CL = 100 pF; tBIT(RXD) - tBIT(BUS) (Note 2)min -65 · typ 0 · max 40 ns19
Receiver Timing Symmetry – 1 Mbps tDIFF(REC), 1MtBIT(TXD) = 1000ns (Figure 2-10), RL = 150, CL = 200 pF; tBIT(RXD) - tBIT(BUS) (Notes 1, 2)min -130 · typ 0 · max 80 ns19
Receiver Timing Symmetry – 2 Mbps tDIFF(REC), 2MtBIT(TXD) = 500 ns (Figure 2-10); RL = 60, CL = 100 pFmin -65 · typ 0 · max 40 ns19
Receiver Timing Symmetry – 2 Mbps tDIFF(REC), 2MtBIT(TXD) = 500 ns (Figure 2-10), RL = 150, CL = 200 pF (Note 1)min -70 · typ 0 · max 40 ns19
Receiver Timing Symmetry – 5 Mbps tDIFF(REC), 5MtBIT(TXD) = 200 ns (Figure 2-10) (Note 1)min -45 · typ 0 · max 15 ns19
Receiver Timing Symmetry – 8 Mbps tDIFF(REC), 8MtBIT(TXD) = 120 ns (Figure 2-10) (Notes 1, 2)min -45 · typ 0 · max 10 ns19
Delay Bus Dominant/Recessive to RXD (Standby mode) tBUS-RXD(S)typ 0.5 us19
Specified Temperature Range TAExtended (E)min -40 · max 125 C22
Operating Temperature Range TAmin -40 · max 150 C22
Storage Temperature Range TAmin -65 · max 155 C22
Thermal Resistance, 8LD SOIC JA8LD SOICtyp 149.5 C/W22
Propagation Delay TXD to RXD Worst Case of tLOOP(R) and tLOOP(F) tTXD - RXDExtended (E); TAMB = -40°C to +125°C; VDD = 4.5V to 5.5V; VIO = 1.7V to 5.5V; RL = 60Ω; CL = 100 pFtyp 90 · max 120 ns18
Propagation Delay TXD to RXD Worst Case of tLOOP(R) and tLOOP(F) tTXD - RXDExtended (E); RL = 150Ω; CL = 200 pF; characterized, not 100% testedtyp 115 · max 150 ns18
Propagation Delay, Rising Edge tLOOP(R)Extended (E); RL = 60Ω; CL = 100 pFtyp 90 · max 120 ns18
Propagation Delay, Falling Edge tLOOP(F)Extended (E); RL = 60Ω; CL = 100 pFtyp 80 · max 120 ns18
Recessive Bit Time on RXD – 1 Mbps, Loop Delay Symmetry tBIT(RXD), 1MtBIT(TXD) = 1000 ns; Figure 2-10; RL = 60Ω; CL = 100 pFmin 900 · typ 985 · max 1100 ns18
Recessive Bit Time on RXD – 1 Mbps, Loop Delay Symmetry tBIT(RXD), 1MtBIT(TXD) = 1000 ns; Figure 2-10; RL = 150Ω; CL = 200 pF; characterized, not 100% testedmin 800 · typ 960 · max 1255 ns18
Recessive Bit Time on RXD – 2 Mbps, Loop Delay Symmetry tBIT(RXD), 2MtBIT(TXD) = 500 ns; Figure 2-10; RL = 60Ω; CL = 100 pFmin 450 · typ 490 · max 550 ns18
Recessive Bit Time on RXD – 2 Mbps, Loop Delay Symmetry tBIT(RXD), 2MtBIT(TXD) = 500 ns; Figure 2-10; RL = 150Ω; CL = 200 pF; characterized, not 100% testedmin 400 · typ 460 · max 550 ns18
Recessive Bit Time on RXD – 5 Mbps, Loop Delay Symmetry tBIT(RXD), 5MtBIT(TXD) = 200 ns; Figure 2-10min 160 · typ 190 · max 220 ns18
Recessive Bit Time on RXD – 8 Mbps, Loop Delay Symmetry tBIT(RXD), 8MtBIT(TXD) = 120 ns; Figure 2-10; characterized, not 100% testedmin 85 · typ 100 · max 135 ns18
Transmitted Bit Time on Bus – 1 Mbps tBIT(BUS), 1MtBIT(TXD) = 1000 ns; Figure 2-10; RL = 60Ω; CL = 100 pFmin 870 · typ 1000 · max 1060 ns18
Transmitted Bit Time on Bus – 1 Mbps tBIT(BUS), 1MtBIT(TXD) = 1000 ns; Figure 2-10; RL = 150Ω; CL = 200 pF; characterized, not 100% testedmin 870 · typ 1000 · max 1060 ns18
Transmitted Bit Time on Bus – 2 Mbp tBIT(BUS), 2MtBIT(TXD) = 500 ns; Figure 2-10; RL = 60Ω; CL = 100 pFmin 435 · typ 515 · max 530 ns19
Transmitted Bit Time on Bus – 2 Mbp tBIT(BUS), 2MtBIT(TXD) = 500 ns; Figure 2-10; RL = 150Ω; CL = 200 pF; characterized, not 100% testedmin 435 · typ 480 · max 550 ns19
Transmitted Bit Time on Bus – 5 Mbps tBIT(BUS), 5MtBIT(TXD) = 200ns; Figure 2-10; characterized, not 100% testedmin 155 · typ 200 · max 210 ns19
Transmitted Bit Time on Bus - 8Mbps tBIT(BUS), 8MtBIT(TXD) = 120 ns; Figure 2-10; characterized, not 100% testedmin 100 · typ 125 · max 140 ns19
Receiver Timing Symmetry – 1 Mbps tDIFF(REC), 1MtBIT(RXD) - tBIT(BUS); tBIT(TXD) = 1000 ns; Figure 2-10; RL = 60Ω; CL = 100 pFmin -65 · typ 0 · max 40 ns19
Receiver Timing Symmetry – 1 Mbps tDIFF(REC), 1MtBIT(RXD) - tBIT(BUS); tBIT(TXD) = 1000ns; Figure 2-10; RL = 150Ω; CL = 200 pF; characterized, not 100% testedmin -130 · typ 0 · max 80 ns19
Receiver Timing Symmetry – 2 Mbps tDIFF(REC), 2MtBIT(TXD) = 500 ns; Figure 2-10; RL = 60Ω; CL = 100 pFmin -65 · typ 0 · max 40 ns19
Receiver Timing Symmetry – 2 Mbps tDIFF(REC), 2MtBIT(TXD) = 500 ns; Figure 2-10; RL = 150Ω; CL = 200 pF; characterized, not 100% testedmin -70 · typ 0 · max 40 ns19
Receiver Timing Symmetry – 5 Mbps tDIFF(REC), 5MtBIT(TXD) = 200 ns; Figure 2-10; characterized, not 100% testedmin -45 · typ 0 · max 15 ns19
Receiver Timing Symmetry – 8 Mbps tDIFF(REC), 8MtBIT(TXD) = 120 ns; Figure 2-10; characterized, not 100% testedmin -45 · typ 0 · max 10 ns19
Delay Bus Dominant/Recessive to RXD (Standby mode) tBUS-RXD(S)Standby modetyp 0.5 us19

Pins, by the datasheet

8
1 TXD
Transmit data input; low drives the bus dominant and high selects recessive; internal nominal 33 kΩ pull-up to VIO. · p. 7
2 VSS
Ground supply pin. · p. 7
3 VDD
Positive supply for transmitter and receiver, including the wake-up receiver. · p. 7
4 RXD
Receive data output supplied by VIO; high when the CAN bus is recessive and low when dominant. · p. 7
5 VIO
Supply for digital I/O pins. · p. 7
6 CANL
CAN low-level bus I/O; drives the low side and connects to the receive comparator; disconnects when unpowered. · p. 7
7 CANH
CAN high-level bus I/O; drives the high side and connects to the receive comparator; disconnects when unpowered. · p. 7
8 STBY
Standby mode input; high selects Standby mode. · p. 7

Open-source boards using it

6
  • 4 layers103.5 × 48.3 mmButtonBd2, the printed circuit board in 3D

    ButtonBd2

    frc971/electrical

    This repo contains the electrical files for the 971 FRC team. The files include PCBs and the electrical system diagrams. The PCBs are created using KiCad.

    165 parts3Apache-2.0
  • 2 layers100 × 95 mmRRFExtRP2040, the printed circuit board in 3D

    RRFExtRP2040

    nyarurato/RRFExtRP2040Board

    DIY Duet3 Extension Board

    92 parts
  • 4 layers65 × 58 mmPI Power Board, the printed circuit board in 3D

    PI Power Board

    frc971/electrical

    This repo contains the electrical files for the 971 FRC team. The files include PCBs and the electrical system diagrams. The PCBs are created using KiCad.

    118 parts3Apache-2.0
  • 2 layersBOOSTV2, the printed circuit board in 3D

    BOOSTV2

    zhaque3/DC-DC-Boost-Converter

    A repository consisting of the PCB Design and firmware for DC-DC Boost converter on the University of Alberta EcoCar vehicle.

    77 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the MCP2542FD-E/SN?

Yes. The symbol is Celestial_Interface_CAN:MICROCHIP MCP2542FD and the footprint Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the MCP2542FD-E/SN?

SOIC-8, with 8 pins. Its footprint is drawn on this page.

Where is the MCP2542FD-E/SN datasheet?

Microchip Technology publishes it: the Datasheet link on this page opens it.

Where can I order the MCP2542FD-E/SN?

JLCPCB lists it as part C220598, with 569 in stock; the sellers' links on this page open their listings.

What can replace the MCP2542FD-E/SN?

Parts like it in the library: the TJA1051T/3/1J by NXP Semiconductors, the SN65HVD230D by Texas Instruments, the TJA1042T/1J by NXP Semiconductors and the CA-IF1051S by Chipanalog. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the MCP2542FD-E/SN?

6 boards in 5 repositories on GitHub; the most starred are listed on this page, with their KiCad files.