
Dev habit reminder
Rikeroo/habit-reminder
Low energy physical habit reminder, using RGB LEDs, a small task screen and tactile switches to build useful habits and get tasks done

Firmware ESP-IDF para a DPSin Board WiFi Triac (rev v1.0.1): relé AC ON/OFF e dimmer TRIAC por porcentagem, controlados pelo app, com pareamento por hold ≥10 s no botão PAIR.
DPSin Board WiFi Triac is an open-source printed circuit board by gmeirelles-ops, from the gmeirelles-ops/esp32-DPTri repository on GitHub. It is a 4-layer board of 66.6 × 86.6 mm with 62 parts on 66 nets, routed with 192 tracks and 30 vias.
It is built around the ESP32-WROOM-32E-N4, HLK-5M05 and BTB16Q-600BW, with the LD1117S33CTR-HXY, EL357N(B)(TA)-G and MOC3023S-TA1 among its other parts. Its parts include 22 resistors, 11 capacitors, 7 diodes, 5 ICs and 4 transistors. It belongs with the radio and wireless boards and the ESP32 boards of this library.
Firmware ESP-IDF para a DPSin Board WiFi Triac (rev v1.0.1): relé AC ON/OFF e dimmer TRIAC por porcentagem, controlados pelo app, com pareamento por hold ≥10 s no botão PAIR. Stack de desenvolvimento: Spec Kit, multiagentes, build autocorretivo, revisão, testes e memória auditável.
esp32 (módulo ESP32-WROOM-32E-N4).specify/memory/constitution.md (atualmente v5.3.2)hardware/Board WiFi Triac/.specify/memory/constitution.md (v2.0.0+)GPIO, credenciais, tópicos MQTT e OTA só entram no firmware depois de registrados no Spec Kit e alinhados ao contrato de hardware.
Pré-requisitos: Git, Python 3 e ESP-IDF na versão da constitution, com o ambiente exportado:
cd esp32-DPTri
idf.py set-target esp32
idf.py build
idf.py sizeNão execute flash, erase_flash, commit ou push sem pedido explícito.
Validação estrutural do template/runtime:
python -m unittest discover -s tests/agent_loop -p "test_*.py"
python -m unittest discover -s tests/tools -p "test_*.py"
python -m unittest discover -s tests/e2e -p "test_*.py"
python .agent/scripts/policyctl.py validate
idf.py build$speckit-constitution
$speckit-specify
$speckit-clarify
$speckit-plan
$speckit-tasks
$loop-engineeringFontes de verdade de hardware: revisão da placa, esquemático KiCad e
datasheets. O loop seleciona tarefas, implementa, compila, depura, revisa,
testa e atualiza .agent/STATE.md até DONE ou bloqueio real.
| Caminho | Finalidade |
|---|---|
main/, components/ | Firmware ESP-IDF |
specs/, .specify/ | Especificações, planos e tarefas Spec Kit |
.agent/ | Runtime, políticas, estado, contexto, RAG e relatórios |
.agents/, .codex/, .cursor/ | Skills e configuração dos agentes |
hardware/ | Contrato de placa e projeto KiCad Board WiFi Triac |
tests/hardware/ | Planos que exigem evidência de bancada |
examples/ | Receitas opt-in; não entram no build baseline |
.github/workflows/ | Validação independente do runtime e do firmware |
flash, erase_flash, mudanças destrutivas e push exigem pedido explícito.NOT_RUN.Os contratos protegidos canônicos ficam em
.agent/policies/contracts.yaml. Valide-os antes de implementar:
python .agent/scripts/policyctl.py validateAs versões do template são registradas em CHANGELOG.md. A versão atual está em VERSION. A licença legal permanece uma decisão do proprietário do repositório.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 10k | Library:R_0603_1608Metric | R1, R2, R3, R4, R6, R8, R9, R11, R13, R15, R22 |
| 6 | 100nF | Library:C_0603_1608Metric | C3, C5, C6, C7, C8, C11 |
| 4 | BC817 | Library:SOT-23 | Q1, Q2, Q3, Q4 |
| 4 | M3 Mounting Hole | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad | H1, H2, H3, H4 |
| 3 | 1k | Library:R_0603_1608Metric | R5, R10, R14 |
| 2 | 1N4148WS | Library:D_SOD-323 | D1, D7 |
| 2 | 220k | Library:R_1206_3216Metric | R18, R19 |
| 2 | 300R | Library:R_0603_1608Metric | R12, R16 |
| 2 | B5819W SL | Diode_SMD:D_SOD-123 | D2, D3 |
| 1 | +3V3 - 800mA | Library:SOT-223-3_TabPin2 | U1 |
| 1 | 100nF | Library:C_0805_2012Metric | C1 |
| 1 | 10uF | Library:C_0603_1608Metric | C4 |
| 1 | 10uF | Library:C_0805_2012Metric | C2 |
| 1 | 1A-1kV | Library:Diode_Bridge2 | D6 |
| 1 | 1k | Library:R_0805_2012Metric | R21 |
| 1 | 1nF | Library:C_1206_3216Metric | C9 |
| 1 | 22k | Library:R_1206_3216Metric | R20 |
| 1 | 270R | Library:R_0603_1608Metric | R7 |
| 1 | 4.7uF | Library:C_1206_3216Metric | C10 |
| 1 | 620R | Library:R_2512_6332Metric | R17 |
| 1 | AC Power | Library:CUI_TBP03R1-350-02GR | J2 |
| 1 | CR2032 | Library:CR2032-1 | BT1 |
| 1 | EL357N(B)(TA)-G | Library:SOIC-4 | U5 |
| 1 | ESP32-WROOM-32 | Library:ESP32-WROOM-32 | U2 |
| 1 | HLK-5M05 | Library:HLK-5M05 | PS1 |
| 1 | KT-0805G | LED_SMD:LED_0805_2012Metric | D4 |
| 1 | LOGO | Library:LOGO-DIPONTO-4MM | G*** |
| 1 | MOC3023S-TA1 | Library:MOC3063 | U4 |
| 1 | Programming | Library:Tag-Connect_TC2050-IDC-FP_2x05_P1.27mm_Vertical | J1 |
| 1 | Q_TRIAC_A1A2G | Library:TO-263-2 | D5 |
| 1 | RELAY2 | Library:RELAY2 | K1 |
| 1 | RV8803 | Library:RV-8803-C7-TA-QC | U3 |
| 1 | Relay | Library:CUI_TBP03R1-350-02GR | J3 |
| 1 | SW_Push | Library:TACTILE2 | S1 |
| 1 | Triac | Library:CUI_TBP03R1-350-02GR | J4 |

Rikeroo/habit-reminder
Low energy physical habit reminder, using RGB LEDs, a small task screen and tactile switches to build useful habits and get tasks done


festlv/rioctrl-hw
Hardware design for modular CNC controller




antmicro/scalenode-cm4-baseboard
Baseboard for Raspberry Pi 4 Compute Module optimized for clustering

antmicro/snapdragon-845-baseboard
https://antmicro.com/blog/2022/04/open-source-snapdragon-845-baseboard/
It measures 66.6 × 86.6 mm and has 4 copper layers, 1.6 mm thick.
62 parts, built around the ESP32-WROOM-32E-N4, HLK-5M05, BTB16Q-600BW and LD1117S33CTR-HXY. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the gmeirelles-ops/esp32-DPTri repository on GitHub, at the commit this page was made from: the board is hardware/Board WiFi Triac/DPSin Board WiFi Triac.kicad_pcb and its schematic hardware/Board WiFi Triac/Connectors.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask gmeirelles-ops before reusing the design.