
DPSin Board WiFi Triac
gmeirelles-ops/esp32-DPTri
Firmware ESP-IDF para a DPSin Board WiFi Triac (rev v1.0.1): relé AC ON/OFF e dimmer TRIAC por porcentagem, controlados pelo app, com pareamento por hold ≥10 s no botão PAIR.

SMD Adapter is an open-source printed circuit board by PSuElectro, from the PSuElectro/SMD-Adapter-KiCAD repository on GitHub. It is a 2-layer board of 21.2 × 25.4 mm with 11 parts on 12 nets, routed with 47 tracks and 18 vias.
It is built around the RV-8803-C7-32.768KHZ-3PPM-TA-QC. Its parts include 5 connectors, 2 resistors, 2 diodes, 1 capacitor and 1 IC. It belongs with the interfaces and adapters boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 0805 in | Connector_PinHeader_1.00mm:PinHeader_1x01_P1.00mm_Vertical | J2 |
| 1 | 100nF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1 |
| 1 | 1206 in | Connector_PinHeader_1.00mm:PinHeader_1x01_P1.00mm_Vertical | J1 |
| 1 | CLKOE VDD CLKOUT SDA | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J6 |
| 1 | GND | Connector_PinHeader_1.00mm:PinHeader_1x01_P1.00mm_Vertical | J4 |
| 1 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D2 |
| 1 | LED | LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D1 |
| 1 | R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 1 | R | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1 |
| 1 | RV-8803-C7-32.768KHZ-3PPM-TA-QC | rv-8803:SMT_7-32.768KHZ-3PPM-TA-QC_MCX | U1 |
| 1 | VSS INT EVI SCL | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J5 |

gmeirelles-ops/esp32-DPTri
Firmware ESP-IDF para a DPSin Board WiFi Triac (rev v1.0.1): relé AC ON/OFF e dimmer TRIAC por porcentagem, controlados pelo app, com pareamento por hold ≥10 s no botão PAIR.


google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards


FrameworkComputer/ExpansionCards
Reference designs and documentation to create Expansion Cards for the Framework Laptop

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

It measures 21.2 × 25.4 mm and has 2 copper layers, 1.6 mm thick.
11 parts, built around the RV-8803-C7-32.768KHZ-3PPM-TA-QC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the PSuElectro/SMD-Adapter-KiCAD repository on GitHub, at the commit this page was made from: the board is SMD Adapter.kicad_pcb and its schematic SMD Adapter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask PSuElectro before reusing the design.