The SS26 is a schottky Diode made by ElecSuper in a DO-214AC(SMA) package with 2 pins. 2A 500uA 60V 700mV Independent DO-214AC(SMA) Schottky Diodes ROHS.
PCBKit's library has its KiCad symbol (Diode:SS26, from KiCad's library) and its footprint (Diode_SMD:D_SMA, from KiCad's library), ready for a KiCad board. 202,722 are in stock at JLCPCB (part C5350986). 15 open-source boards in 14 repositories on GitHub use it.
| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| Maximum repetitive peak reverse voltage VRRM | SS26; 25 ℃ ambient unless otherwise specified | max 60 V | 1 |
| Maximum RMS voltage VRMS | SS26; 25 ℃ ambient unless otherwise specified | max 42 V | 1 |
| Maximum DC blocking voltage VDC | SS26; 25 ℃ ambient unless otherwise specified | max 60 V | 1 |
| Average Rectified Output Current at TL=100 C IF(AV) | SS26; TL=100 C; single phase half-wave 60Hz, resistive or inductive load | max 2 A | 1 |
| Non-Repetitive Peak Forward Surge Current IFSM | SS26; 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) | max 50 A | 1 |
| Maximum Instantaneous Forward Voltage at 2.0 A VF | SS26; forward current 2.0 A; 25 ℃ ambient | max 0.7 V | 1 |
| Maximum DC reverse current at rated DC blocking voltage IR | SS26; TJ=25 ℃ | max 0.5 mA | 1 |
| Maximum DC reverse current at rated DC blocking voltage IR | SS26; TJ=125 ℃ | max 50 mA | 1 |
| Typical thermal resistance RΘJA | SS26; DO-214AC/SMA | typ 80 ℃/W | 1 |
| Operating junction temperature range TJ | SS26 | min -55 · max 150 ℃ | 1 |
| Storage temperature range TSTG | SS26 | min -55 · max 150 ℃ | 1 |
| Pin | Name | Type |
|---|---|---|
| 1 | K | Passive |
| 2 | A | Passive |
harsh-hw-dev/120W-Synchronous-Buck-Converter-LM5116
“Designed a 120W high-efficiency DC-DC synchronous buck converter using LM5116 (12V @ 10A). Includes schematic, component selection, feedback loop compensation, and performance optimization for stable output and high…
azaslavskis/smart-home-software
Software for smart home project (e.g backup)
XuanTrace/half-bridge-load-cells-board
Open-source half-bridge load cell PCB design featuring the HX710A/B/C ADC chip. Supports SMD with castellation (half-hole), pin headers, and XH2.45 4-pin connectors.
Lucas-Lofrano/hw-rfid-semb-01
Projeto Final da disciplina de Sistemas Embarcados da Universidade Federal de Uberlândia (UFU). Consiste em um leitor RFID MFRC522 microcontrolado por um STM32U031K6U.
<iframe src="https://pcbkit.io/embed/parts/elecsuper/SS26" title="SS26 in PCBKit" width="100%" height="480" style="border:0;border-radius:12px" allow="fullscreen" loading="lazy"></iframe><img src="https://pcbkit.io/embed/parts/elecsuper/SS26.jpg" alt="SS26" width="1200" height="900">[](https://pcbkit.io/parts/elecsuper/SS26)Yes. The symbol is Diode:SS26 and the footprint Diode_SMD:D_SMA, both drawn on this page. PCBKit places them on a board for you when you design with it.
DO-214AC(SMA), with 2 pins. Its footprint is drawn on this page.
ElecSuper publishes it: the Datasheet link on this page opens it.
JLCPCB lists it as part C5350986, with 202,722 in stock; the sellers' links on this page open their listings.
Parts like it in the library: the SS210 by MDD, the SS56 by hongjiacheng, the SS310 by hongjiacheng and the SS36 by hongjiacheng. Check their datasheets: a part that fits the footprint may still differ in its ratings.
15 boards in 14 repositories on GitHub; the most starred are listed on this page, with their KiCad files.
