2 layers80 × 60 mm
Atari SIO2SD Igi Version 11-2016
RichardRozehnal/Atari-SIO2SD-Igi-Version
SIO2SD disk drive emulator for 8bit Atari.
77 parts4GPL-3.0
2 layers100 × 100 mm
Charger
FridayUser/Universal_charger- Size
- 100 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 198
- Nets
- 132
- Pads
- 628
- Tracks, vias
- 1,152, 887
- Pours
- 7
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 16 Apr 2024
- Updated
- 23 Jun 2024
Overview
Charger is an open-source printed circuit board by FridayUser, from the FridayUser/Universal_charger repository on GitHub. It is a 2-layer board of 100 × 100 mm with 198 parts on 132 nets, routed with 1,152 tracks and 887 vias.
It is built around the LM2904, MCP6004-E/P and XL4015E1, with the LM2575-12BU, MCP6001OB and CD4051BE among its other parts. Its parts include 79 resistors, 34 capacitors, 19 ICs, 19 transistors and 7 diodes. It belongs with the power boards and the RP2040 boards of this library.
Main components
12
LM2904
SOP-8-15V~-1.5V、1.5V~15V 0℃~+70℃ 1MHz 2 2mV 3V~30V 3nA 40mA 45nA 500uA 85dB SOP-8 Operational Amplifier ROHSGOODWORKOperational Amplifier
MCP6004-E/P
PDIP-14-40℃~+125℃ 1.8V~6V 100uA 1MHz 1pA 1pA 23mA 28nV/√Hz@1kHz 2uV/℃ 4 4.5mV 600V/ms 76dB ESD protection Rail-to-Rail Input, Rail-to-Rail Output PDIP-14 Operational Amplifier ROHSMicrochip TechnologyOperational Amplifier
XL4015E1
TO-263-5-40℃~+125℃ 1 1.25V~32V 180kHz 5A 5mA 8V~36V Adjustable Buck Buck Built-in No TO-263-5 DC-DC Converters ROHSXLSEMIDC-DC ConvertersLM2575-12BU
TO-263-5-40℃~+125℃@(TJ) 1 12V 1A 4V~40V 52kHz 5mA Buck Built-in Fixed No Overcurrent Protection、Cycle-by-cycle current limiting Step-down type TO-263-5 DC-DC ConvertersMicrochip TechnologyDC-DC Converters
MCP6001OB
SOT-23-5-3V~-900mV、900mV~3V -40℃~+125℃ 1 1.8V~6V 1MHz 1pA 1pA 2.7uV/℃ 27nV/√Hz@1kHz 3.5mV 70dB 75uA 800V/ms 84mA Rail-to-Rail Input, Rail-to-Rail Output SOT-23-5 Operational Amplifier ROHSGREENMICROOperational Amplifier
CD4051BE
PDIP-16-55℃~+125℃ 125Ω 20MHz 3V~20V 450ns 8 8:1 PDIP-16 Analog Switches, Multiplexers ROHSTexas InstrumentsAnalog Switches, Multiplexers
L7805
TO-220ST0℃~+125℃@(Tj) 1 1.2A 20V 2V@(1A) 42uV 500uA 5V 73dB@(120Hz) Fixed Positive Short Circuit Protection TO-220ST Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSOSENVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
LDI1117-3.3H
SOT-223Voltage Regulators - Linear, Low Drop Out (LDO) RegulatorsDIOTEC
BC846BW
SOT-3231 NPN 100MHz 100mA 150mW 15nA 450 600mV 65V 6V NPN SOT-323 Bipolar (BJT) ROHSGuangdong HottechBipolar (BJT)
MJD45H11T4
DPAK-55℃~+150℃ 1 PNP 10uA 1V 20W 40 5V 80V 8A PNP DPAK Bipolar (BJT) ROHSSTMicroelectronicsBipolar Transistors - BJT
LL103A
-Small Signal Schottky DiodeDIOTECSchottky Diodes
B540C
SMC(DO-214AB)-55℃~+150℃ 1 Independent 100A 40V 500uA@40V 550mV@5A 5A SMC(DO-214AB) Schottky Diodes ROHSDiodes IncorporatedSchottky Diodes
README
README.mdView this project on CADLAB.io.
Witam w projekcie ładowarki!
Update plików
Proszę o pisanie jasnego podsumowania i zwięzłych opisów przy zatwierdzaniu plików. W szczególności plików innych niż programy. Pamietajcie, że po zatwierdzeniu należy też pliki przesłać. ewentualnie dodać jakieś nowe. Jeśli ktoś nie ogarnia gita to polecam wersję desktop.
Tworzenie plików i folderów
Starajmy się twożyć jak najbardziej przejrzyście to repozytorium, żeby się poprostu nie zgubić w tym wszystkim
Parts
198| Qty | Value | Footprint | References |
|---|---|---|---|
| 24 | 1.2k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R10, R11, R12, R28, R29, R30, R31, R32, R33, R48, R55, R57, R58, R63, R67, R69 +8 |
| 21 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R13, R14, R15, R34, R35, R36, R45, R47, R49, R50, R51, R52, R53, R54, R59, R61 +5 |
| 18 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C3, C4, C10, C11, C12, C13, C15, C27, C28, C29, C31, C36, C37, C38 +2 |
| 18 | TestPoint_Pad_D1.0mm | TestPoint:TestPoint_Pad_D1.0mm | *CHARGER_EN, ADC, BALL_SET_V, BATTERY_EN, CHARGER_SET_I, CHARGER_SET_V, HALL, HALL, LOAD_EN, LOAD_SET_I, VB1, VB2, VB3, VB4, VB5, VB6 +2 |
| 14 | 2k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3, R4, R5, R6, R22, R23, R24, R25, R26, R27, R44, R70 |
| 8 | 5.1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R16, R17, R18, R37, R38, R39, R46, R62 |
| 7 | BC846BW | Package_TO_SOT_SMD:SOT-323_SC-70 | Q1, Q2, Q3, Q7, Q8, Q9, Q13 |
| 6 | 1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C16, C17, C18, C19, C20, C21 |
| 6 | LM2904 | Package_SO:SO-8_3.9x4.9mm_P1.27mm | U1, U2, U3, U4, U5, U6 |
| 6 | MJD45H11T4 | Package_TO_SOT_SMD:TO-252-2 | Q4, Q5, Q6, Q10, Q11, Q12 |
| 5 | , , , , | ||
| 4 | 1u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C32, C33, C34, C35 |
| 4 | 510 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R19, R20, R21, R40 |
| 3 | 470u | Library:CP_Elec_12.5x13.5 | C22, C24, C25 |
| 3 | LL103A | Diode_SMD:D_MiniMELF | D1, D2, D3 |
| 2 | 0.1 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R43, R60 |
| 2 | 10A | Fuse:Fuse_2010_5025Metric_Pad1.52x2.65mm_HandSolder | F1, F2 |
| 2 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R64, R65 |
| 2 | 22u | Capacitor_SMD:CP_Elec_4x5.4 | C26, C30 |
| 2 | 47uH | Inductor_SMD:L_Bourns_SRP1038C_10.0x10.0mm | L1, L2 |
| 2 | ACS712xLCTR-20A | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U7, U12 |
| 2 | B540C | Diode_SMD:D_3220_8050Metric_Pad2.65x5.15mm_HandSolder | D4, D5 |
| 2 | BUJ302AD | Package_TO_SOT_SMD:TO-252-2 | Q15, Q16 |
| 2 | IRF7404 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | Q17, Q18 |
| 2 | MCP6004 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U13, U25 |
| 2 | SS26 | Diode_SMD:D_SMA | D6, D7 |
| 2 | XL4015 | Package_TO_SOT_SMD:TO-263-5_TabPin3 | U17, U18 |
| 1 | 10 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R74 |
| 1 | 100 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R42 |
| 1 | 100k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R56 |
| 1 | 1n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C9 |
| 1 | 330u | Inductor_SMD:L_Bourns_SRR1208_12.7x12.7mm | L3 |
| 1 | 390 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R41 |
| 1 | BC846 | Package_TO_SOT_SMD:SOT-323_SC-70 | Q19 |
| 1 | Bat_ballanser_conn | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Horizontal | J1 |
| 1 | Battery_conn | Connector_AMASS:AMASS_XT60PW-M_1x02_P7.20mm_Horizontal | J2 |
| 1 | CD4051B | Package_SO:SO-16_5.3x10.2mm_P1.27mm | U24 |
| 1 | L7805 | Package_TO_SOT_SMD:TO-263-2 | U21 |
| 1 | LDI1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U22 |
| 1 | LM2575-12BU | Package_TO_SOT_SMD:TO-263-5_TabPin3 | U20 |
| 1 | MCP6001 | Package_TO_SOT_SMD:SOT-23-5 | U10 |
| 1 | MCP6001-OT | Package_TO_SOT_SMD:SOT-23-5 | U19 |
| 1 | MJD31CT4 | Package_TO_SOT_SMD:TO-252-2 | Q14 |
| 1 | Power_conn | Connector_AMASS:AMASS_XT60PW-M_1x02_P7.20mm_Horizontal | J3 |
| 1 | RaspberryPi_Pico | Module_RaspberryPi_Pico:RaspberryPi_Pico_Common_SMD | U23 |
| 1 | Screen_SPInCtrlnPwr_Conn | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical | J4 |
| 1 | Temp_Sens_Conn | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J8 |
| 1 | User_Interface_Conn | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J5 |
The 192 most common of 198 parts.
Similar boards
- 2 layers50 × 50 mm
- 4 layers100 × 120.4 mm
- 2 layers43.8 × 31.8 mm
- 2 layers72.6 × 46.7 mm
PowerRDP
pbbp0904/HELEN
The rendering above is a rough idea of what this payload will look like with some of its components installed.
60 partsMIT - 2 layers95 × 95 mm
Plate amp psu
duanestorey/hifi-amp
A high-fidelity four-channel amplifier with active-crossovers and room correction
57 parts1 - 2 layers150 × 150 mm
HUB75 RP2840
mortens-lab/HUB75-PICO-shield
HUB75 matrix display shield controlled by a Raspberry Pi Pico W
50 parts16 - 2 layers100 × 68 mm
Questions
How big is the Charger PCB?
It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Charger use?
198 parts, built around the LM2904, MCP6004-E/P, XL4015E1 and LM2575-12BU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Charger KiCad files?
From the FridayUser/Universal_charger repository on GitHub, at the commit this page was made from: the board is Charger/Charger.kicad_pcb and its schematic Charger/Charger-backups/Charger.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Charger design in my own project?
Its repository states no licence, so its author keeps all rights: ask FridayUser before reusing the design.