
MCP6004-E/P
Microchip TechnologyExtended
-40℃~+125℃ 1.8V~6V 100uA 1MHz 1pA 1pA 23mA 28nV/√Hz@1kHz 2uV/℃ 4 4.5mV 600V/ms 76dB ESD protection Rail-to-Rail Input, Rail-to-Rail Output PDIP-14 Operational Amplifier ROHS
- Part id
- microchip/MCP6004-E/P
- Category
- Operational Amplifier
- Package
- PDIP-14
- Pins
- 14
- In stock
- 48 at JLCPCB (C645761)
- Used on
- 248 open-source boards
Overview
The MCP6004-E/P is an operational Amplifier made by Microchip Technology in a PDIP-14 package with 14 pins. -40℃~+125℃ 1.8V~6V 100uA 1MHz 1pA 1pA 23mA 28nV/√Hz@1kHz 2uV/℃ 4 4.5mV 600V/ms 76dB ESD protection Rail-to-Rail Input, Rail-to-Rail Output PDIP-14 Operational Amplifier ROHS.
PCBKit's library has its KiCad symbol (Amplifier_Operational:MCP6004, from KiCad's library) and its footprint (Package_DIP:DIP-14_W8.89mm_SMDSocket_LongPads, from KiCad's library), ready for a KiCad board. 48 are in stock at JLCPCB (part C645761). 248 open-source boards in 176 repositories on GitHub use it.
Symbol
Footprint
Pinout
14| Pin | Name | Type |
|---|---|---|
| 1 | — | Output |
| 2 | - | Input |
| 3 | + | Input |
| 4 | V+ | Power in |
| 5 | + | Input |
| 6 | - | Input |
| 7 | — | Output |
| 8 | — | Output |
| 9 | - | Input |
| 10 | + | Input |
| 11 | V- | Power in |
| 12 | + | Input |
| 13 | - | Input |
| 14 | — | Output |
- 4 layers70.8 × 108 mm

- 4 layers60 × 94 mm

DaisySeedPedal125b
bkshepherd/DaisySeedProjects
A collection of hardware and software projects based around the Electro-Smith Daisy Seed
80 parts559MIT - 2 layers75 × 100 mm

Phased
Neumi/open_echo
Open Source echo sounder / depth sounder / SONAR for bathymetry and research. Arduino based and compatible.
77 parts530 - 2 layers66 × 99 mm

Nucleo32TNC
mobilinkd/NucleoTNC
The Nucleo TNC is a breadboard implementation of the Mobilinkd TNC3 using a STM32L432KC Nucleo32 board. This TNC faithfully implements the audio section and EEPROM storage of the TNC3.
54 parts110GPL-3.0 - 2 layers171.5 × 106.7 mm

Sequencer
westlicht/performer-hardware
PER|FORMER Eurorack Sequencer - Hardware Design Files
435 parts110 - 2 layers267 × 300 mm

Output.Panel R0.5.1 300x300 2layer step1 Modified
rusefi/hw_microRusEfi
microRusEfi board for rusEfi ECU
2,371 parts98 - 4 layers29 × 20.9 mm

Wideband controller
mck1117/wideband
The firmware/boards directory contains configuration for each board this firmware supports.
60 parts81MIT - 2 layers248.9 × 120.7 mm

16nx
16n-faderbank/16nx
16nx is a controller for musical instruments. Sixteen faders,MIDI over USB and jack, CV out, and I2C out. Based around RP2040.
171 parts76
Parts like it
8LM324N
DIP-14-16V~-1.5V、1.5V~16V -40℃~+85℃ 1.5V~30V 250nA 35mA 4 50nA 600uA 7uV/℃ 80dB 9mV DIP-14 Operational Amplifier ROHSHGSEMIOperational AmplifierLM324N(XBLW)
DIP-14-12V~-1.5V、1.5V~12V 0℃~+70℃ 3V~24V 4 40mA 45nA 5nA 600uA 7mV 80dB Built-in compensation DIP-14 Operational Amplifier ROHSXBLWOperational AmplifierLM324L-D14-T
DIP-14-20℃~+85℃ 250nA 3V~40V 4 40mA 50nA 5mV 700uA 75dB Built-in compensation DIP-14 Operational Amplifier ROHSUTCOperational AmplifierTL074L-D14-T
DIP-14-18V~18V -20℃~+85℃ 1.4mA 100pA 10uV/℃ 13V/us 15nV/√Hz@1kHz 200pA 2MHz 4 60mA 6mV 86dB Built-in compensation DIP-14 Operational Amplifier ROHSUTCOperational AmplifierLM224N
DIP-14-16V~-1.5V、1.5V~16V -25℃~+85℃ 150nA 35mA 35nV/√Hz@1kHz 3V~32V 3mV 4 500V/ms 5nA 600uA 80dB DIP-14 Operational Amplifier ROHSHGSEMIOperational AmplifierLM2902N
DIP-14-15V~-1.5V、1.5V~15V -40℃~+85℃ 1.3MHz 20nA 2mV 2nA 3V~30V 4 400V/ms 40mA 40nV/√Hz@1kHz 700uA 7uV/℃ 80dB DIP-14 Operational Amplifier ROHSHGSEMIOperational AmplifierLM324N
DIP-14-10V~-1.5V、1.5V~10V 0℃~+70℃ 250nA 2mV 3V~20V 4 40mA 5nA 700uA 80dB DIP-14 Operational Amplifier ROHSHXY MOSFETOperational AmplifierHX064-P
DIP-14-16V~-1.5V、1.5V~16V 0℃~+70℃ 150nA 3V~32V 3mA 4 500nA 60mA 65dB 7mV 7uV/℃ Built-in compensation DIP-14 Operational Amplifier ROHSZHHXDZOperational Amplifier
Questions
Is there a KiCad symbol and footprint for the MCP6004-E/P?
Yes. The symbol is Amplifier_Operational:MCP6004 and the footprint Package_DIP:DIP-14_W8.89mm_SMDSocket_LongPads, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the MCP6004-E/P?
PDIP-14, with 14 pins. Its footprint is drawn on this page.
Where is the MCP6004-E/P datasheet?
Microchip Technology publishes it: the Datasheet link on this page opens it.
Where can I order the MCP6004-E/P?
JLCPCB lists it as part C645761, with 48 in stock; the sellers' links on this page open their listings.
What can replace the MCP6004-E/P?
Parts like it in the library: the LM324N by HGSEMI, the LM324N(XBLW) by XBLW, the LM324L-D14-T by UTC and the TL074L-D14-T by UTC. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the MCP6004-E/P?
248 boards in 176 repositories on GitHub; the most starred are listed on this page, with their KiCad files.