
Generic bottom test jig
chickadee-tech/g-test-bot
Generic Test Jig Bottom for Polystack boards

PER|FORMER Eurorack Sequencer - Hardware Design Files
Sequencer is an open-source printed circuit board by westlicht, from the westlicht/performer-hardware repository on GitHub. It is a 2-layer board of 171.5 × 106.7 mm with 435 parts on 246 nets, routed with 2,450 tracks and 256 vias.
It is built around the OPA4172ID, 74HCT125PW and 74LV1T34GW, with the R-78E5.0-1.0, DAC8568C and MCP6004-E/P among its other parts. Its parts include 86 resistors, 73 diodes, 49 capacitors, 39 switches and 26 connectors. It belongs with the audio and music boards and the STM32 boards of this library.
This repository contains the hardware design files (KiCad) for the PER|FORMER eurorack sequencer.
For more information on the project go here.
The firmware is hosted in a separate repository here.
The schematic is available as a PDF.
| Board | Width (mm) | Height (mm) |
|---|---|---|
| PCB | 171.45 | 106.68 |
| Frontpanel | 172.5 | 128.27 |
The width of the module is 34 HP in eurorack standard.
The BOM is available as a CSV and HTML. In addition to the parts on the PCB there are a few additional hardware components that are necessary to complete the build, see here.
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 38 | 1N4148 | w_diode:D_SOD-123 | D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23, D24 +22 |
| 37 | TL1105 | w_switch:TL1105T | SW1, SW2, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18, SW20, SW21, SW22, SW23, SW24 +21 |
| 32 | LTL1BEKVJNN | w_led:LTL1BEKVJNN | LED1, LED2, LED10, LED11, LED12, LED13, LED14, LED15, LED16, LED17, LED18, LED19, LED20, LED21, LED22, LED23 +16 |
| 25 | 100n | w_capacitor:C_0603 | C1, C2, C3, C4, C14, C17, C19, C20, C25, C27, C28, C30, C31, C32, C35, C36 +9 |
| 24 | PJ301BM | w_connector:PJ301BM | J10, J11, J12, J13, J14, J15, J16, J17, J18, J19, J20, J21, J22, J23, J24, J25 +8 |
| 19 | 1k | w_resistor:R_0603 | R8, R18, R21, R68, R70, R71, R72, R73, R74, R75, R76, R77, R78, R80, R81, R83 +3 |
| 16 | 10k | w_resistor:R_0603 | R2, R5, R6, R7, R19, R20, R36, R49, R50, R55, R58, R61, R66, R67, R79, R82 |
| 15 | 100k | w_resistor:R_0603 | R14, R17, R26, R27, R28, R29, R34, R35, R45, R46, R56, R57, R59, R60, R69 |
| 11 | 220 | w_resistor:R_0603 | R1, R3, R4, R23, R24, R42, R43, R52, R53, R63, R64 |
| 10 | 18p | w_capacitor:C_0603 | C11, C12, C15, C16, C33, C34, C37, C38, C41, C42 |
| 9 | 33k | w_resistor:R_0603 | R10, R11, R12, R13, R31, R32, R38, R39, R48 |
| 8 | 24k | w_resistor:R_0603 | R22, R25, R41, R44, R51, R54, R62, R65 |
| 5 | MMBT3904 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3, Q4, Q5 |
| 4 | 1n | w_capacitor:C_0603 | C9, C10, C21, C22 |
| 4 | 2.2u | w_capacitor:C_0805 | C18, C23, C26, C29 |
| 4 | 200k | w_resistor:R_0603 | R30, R33, R37, R40 |
| 3 | 1M | w_resistor:R_0603 | R9, R15, R16 |
| 3 | 22u | Capacitor_SMD:CP_Elec_5x5.8 | C5, C24, C40 |
| 3 | 74HC595 | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U12, U13, U14 |
| 2 | 1N5819HW | w_diode:D_SOD-123 | D3, D4 |
| 2 | 47u | Capacitor_SMD:CP_Elec_6.3x5.7 | C13, C46 |
| 2 | Bead | w_resistor:R_0603 | L1, L2 |
| 2 | EVQQ2 | Button_Switch_SMD:SW_SPST_EVQQ2 | SW8, SW19 |
| 2 | LM1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U7, U10 |
| 2 | OPA4172 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U4, U15 |
| 2 | PJ301CM | w_connector:PJ301CM_OFFSET | J1, J2 |
| 1 | 1u | w_capacitor:C_0603 | C39 |
| 1 | 22k | w_resistor:R_0603 | R47 |
| 1 | 74HC165 | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U11 |
| 1 | 74HCT125 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U5 |
| 1 | 74LV1T34 | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | 8MHz | Crystal:Crystal_SMD_Abracon_ABM3-2Pin_5.0x3.2mm_HandSoldering | Y1 |
| 1 | DAC8568C | Package_SO:TSSOP-16_4.4x5mm_P0.65mm | U8 |
| 1 | JTAG | Connector_PinHeader_1.27mm:PinHeader_2x05_P1.27mm_Vertical | JP4 |
| 1 | LM4040CIM3-10.0 | Package_TO_SOT_SMD:SOT-23 | D1 |
| 1 | MCP6004 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U6 |
| 1 | NHD-3.12-25664UC | w_lcd:NHD-3.12-25664UC | JP3 |
| 1 | PEC11R | w_rotary_encoder:ALPS_STEC12E08 | ENC1 |
| 1 | PJS008U-3000 | w_connector:PJS008U-3000-0 | JP2 |
| 1 | POWER | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | JP5 |
| 1 | R-78E5.0-1.0 | w_power:R-78E-1.0 | U16 |
| 1 | STM32F405RGTx | Package_QFP:LQFP-64_10x10mm_P0.5mm | U9 |
| 1 | STMPS2151 | Package_TO_SOT_SMD:SOT-23-5 | U3 |
| 1 | Serial / Bootloader | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | JP6 |
| 1 | USB_A | w_connector:MOLEX_USB_105057 | JP1 |
| 1 | VO0600T | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1 |
The 304 most common of 435 parts.

chickadee-tech/g-test-bot
Generic Test Jig Bottom for Polystack boards



pioupiou-archive/pioupiou-v1-electronics
This repository contains the electronic parts of the Pioupiou V1 wind sensor.



mathiasscroccaro/IC-Ferramenta-Desenvolvimento
Esquemáticos, códigos fonte e interface desenvolvidos durante IC

It measures 171.5 × 106.7 mm and has 2 copper layers, 1.6 mm thick.
435 parts, built around the OPA4172ID, 74HCT125PW, 74LV1T34GW and R-78E5.0-1.0. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the westlicht/performer-hardware repository on GitHub, at the commit this page was made from: the board is sequencer.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask westlicht before reusing the design.