
RDP Environmental
pbbp0904/HELEN
The rendering above is a rough idea of what this payload will look like with some of its components installed.

The rendering above is a rough idea of what this payload will look like with some of its components installed.
PowerRDP is an open-source printed circuit board by pbbp0904, from the pbbp0904/HELEN repository on GitHub, published under the MIT licence. It is a 2-layer board of 72.6 × 46.7 mm with 60 parts on 41 nets, routed with 244 tracks and 18 vias.
It is built around the MCP602-I/P, LM2575-12BU and LM2575-3.3BU, with the NTR4003NT1G among its other parts. Its parts include 15 connectors, 13 capacitors, 8 ICs, 7 resistors and 5 inductors.
This is a PCB designed in KiCad for the UAH SHC HELEN project's Radiation Detection Payload (RDP). This board is intended to gather environmental inupt including temperature, pressure and GPS. This information is processed and saved and potentially shared with an external FPGA.

The rendering above is a rough idea of what this payload will look like with some of its components installed.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | Conn_01x02_Male | Connector_Molex:Molex_KK-254_AE-6410-02A_1x02_P2.54mm_Vertical | J1, J2, J3, J4, J5, J6 |
| 3 | 100uF | Capacitor_SMD:CP_Elec_6.3x7.7 | C3, C4, C5 |
| 3 | 12k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R4, R5, R6 |
| 3 | 1N5819 | Diode_SMD:D_SOD-123 | D1, D2, D3 |
| 3 | 1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C11, C12, C13 |
| 3 | 330uF | Capacitor_SMD:CP_Elec_8x10 | C6, C7, C8 |
| 3 | 470uH | Inductor_SMD:L_Bourns_SRR1260 | L3, L4, L5 |
| 3 | Conn_Coaxial | Connector_Coaxial:SMA_Amphenol_132134_Vertical | J13, J14, J15 |
| 2 | 1 uF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1, C2 |
| 2 | 47 uH | rdplibs:Murata 8200 | L1, L2 |
| 2 | LOGO | rdplibs:HELENlogo_large | G***, G*** |
| 2 | MCP602 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U6, U7 |
| 1 | .01 uF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C9 |
| 1 | 12V | Connector_Molex:Molex_KK-254_AE-6410-02A_1x02_P2.54mm_Vertical | J9 |
| 1 | 15 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R7 |
| 1 | 1k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R3 |
| 1 | 24k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R2 |
| 1 | 3.3V | Connector_Molex:Molex_KK-254_AE-6410-02A_1x02_P2.54mm_Vertical | J7 |
| 1 | 3k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1 |
| 1 | 47 uF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C10 |
| 1 | 5V | Connector_Molex:Molex_KK-254_AE-6410-02A_1x02_P2.54mm_Vertical | J8 |
| 1 | FAA LED | Connector_Molex:Molex_KK-254_AE-6410-02A_1x02_P2.54mm_Vertical | J11 |
| 1 | Jumper | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP1 |
| 1 | LM2575-12BU | Package_TO_SOT_SMD:TO-263-5_TabPin3 | U4 |
| 1 | LM2575-3.3BU | Package_TO_SOT_SMD:TO-263-5_TabPin3 | U2 |
| 1 | LM2575-5.0BU | Package_TO_SOT_SMD:TO-263-5_TabPin3 | U3 |
| 1 | NTR4003NT1G | Package_TO_SOT_SMD:TSOT-23_HandSoldering | Q1 |
| 1 | R_POT | Potentiometer_SMD:Potentiometer_Bourns_3214W_Vertical | RV1 |
| 1 | Recom_RS3 | PowerRDP:Recom_RS3 | U1 |
| 1 | SOCKET | Connector_Molex:Molex_KK-254_AE-6410-05A_1x05_P2.54mm_Vertical | J10 |
| 1 | Switch | Connector_Molex:Molex_KK-254_AE-6410-02A_1x02_P2.54mm_Vertical | J12 |
| 1 | TPS60400DBVR | footprints:TPS60400DBVR | U8 |
| 1 | TS555 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U5 |
The 56 most common of 60 parts.

pbbp0904/HELEN
The rendering above is a rough idea of what this payload will look like with some of its components installed.

pbbp0904/HELEN
The rendering above is a rough idea of what this payload will look like with some of its components installed.



duanestorey/hifi-amp
A high-fidelity four-channel amplifier with active-crossovers and room correction

btittelbach/esp32_12chan_lowside_pwm_pcb
Open Hardware PCB designed to drive 12 low-side PWM channels.


MiroslavMitrovic/IgnitionController_STM32
Ignition controller implementation for 4T Single Cylinder/V-Twin motorcycle.


It measures 72.6 × 46.7 mm and has 2 copper layers, 1.6 mm thick.
60 parts, built around the MCP602-I/P, LM2575-12BU, LM2575-3.3BU and NTR4003NT1G. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the pbbp0904/HELEN repository on GitHub, at the commit this page was made from: the board is electrical/PowerRDP/PowerRDP.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).