2 layers101.8 × 52.5 mm
MCP602-I/P
Microchip TechnologyExtended
-40℃~+85℃ 1pA 1pA 2 2.3V/us 2.5uV/℃ 2.7V~6V 2.8MHz 22mA 230uA 29nV/√Hz@1kHz 700uV 90dB Built-in compensation、ESD protection Rail-to-rail output PDIP-8 Operational Amplifier ROHS
- Part id
- microchip/MCP602-I/P
- Category
- Operational Amplifier
- Package
- PDIP-8
- Pins
- 8
- In stock
- 78 at JLCPCB (C640402)
- Used on
- 51 open-source boards
Overview
The MCP602-I/P is an operational Amplifier made by Microchip Technology in a PDIP-8 package with 8 pins. -40℃~+85℃ 1pA 1pA 2 2.3V/us 2.5uV/℃ 2.7V~6V 2.8MHz 22mA 230uA 29nV/√Hz@1kHz 700uV 90dB Built-in compensation、ESD protection Rail-to-rail output PDIP-8 Operational Amplifier ROHS.
PCBKit's library has its KiCad symbol (Amplifier_Operational:MCP602, from KiCad's library) and its footprint (Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPads, from KiCad's library), ready for a KiCad board. 78 are in stock at JLCPCB (part C640402). 51 open-source boards in 39 repositories on GitHub use it.
Symbol
Footprint
Pinout
8| Pin | Name | Type |
|---|---|---|
| 1 | — | Output |
| 2 | - | Input |
| 3 | + | Input |
| 4 | V- | Power in |
| 5 | + | Input |
| 6 | - | Input |
| 7 | — | Output |
| 8 | V+ | Power in |
- 2 layers308.7 × 241.8 mm
OTTOtact
cester-ino/OTTO-hardware
those specs refer to the tactile buttons version, but a led backlight button version is in the works too.
229 parts49GPL-3.0 - 2 layers89.3 × 55 mm
- 4 layers71.1 × 94 mm
Ipotcas
SuperTails/ipotcas
IP over Tin Can and String - Connecting to the internet over two tin cans and a piece of string
75 parts12 - 2 layers187.3 × 109.5 mm
Z80RP2350b
kysilv/z80-rp2350b-zx-compatible
Retrocomputer compatible with ZX Spectrum based on real Z80 + discrete RAM/ROM + rp2350b as ULA
131 parts9GPL-3.0 - 2 layers100 × 100 mm
BLDC STM32 proto 1
g-rahul/Sensored-3-P-BLDC-Closed-Loop-V1
This Firmware was developed as an extension of Ti's Sensored close-loop BLDC motor control using MSP430. Ti's application firmware for MSP430 has been modified for STM32F103 Series MCU's.
131 parts5 - 2 layers245.6 × 85.9 mm
- 4 layers147.8 × 65 mm
Prius gen2
ksmola/PriusG2
Inverter control board for Toyota Prius Gen 2 (XW20) inverter. Some of the schematics are based on Johannes Huebner's work found here. Running openinverter firmware.
149 parts3
Parts like it
8
LM358N
DIP-8-18V~18V 0℃~+70℃ 1.2MHz 10nA 2 30mA 3V~36V 50nA 7mV 800uA 80dB Built-in compensation DIP-8 Operational Amplifier ROHSHGSEMIOperational AmplifierLM358N/NOPB
PDIP-8-16V~-1.5V、1.5V~16V 0℃~+70℃ 1MHz 1mA 2 2mV 3V~32V 40mA 45nA 5nA 65dB 7uV/℃ Built-in compensation PDIP-8 Operational Amplifier ROHSTexas InstrumentsOperational AmplifierLM741CN/NOPB
DIP-8-18V~18V 0℃~+70℃ 1 1.5MHz 1.7mA 25mA 2mV 300nA 500V/ms 7.5uV/℃ 80nA 90dB Overvoltage protection DIP-8 Operational Amplifier ROHSTexas InstrumentsOperational AmplifierNE5532P
PDIP-8-15V~15V 0℃~+70℃ 100dB 10MHz 150nA 16mA 1uA 2 38mA 4mV 5nV/√Hz@1kHz 5uV/℃ 9V/us Built-in compensation PDIP-8 Operational Amplifier ROHSTexas InstrumentsOperational AmplifierLM358N(XBLW)
DIP-8-12V~-1.5V、1.5V~12V 0℃~+70℃ 2 3V~24V 3nA 40mA 45nA 500uA 5mV 600V/ms 7uV/℃ 90dB DIP-8 Operational Amplifier ROHSXBLWOperational AmplifierUA741CP(XBLW)
DIP-8-22V~22V 0℃~+70℃ 1 1.7mA 200nA 25mA 500V/ms 6mV 800nA 96dB DIP-8 Operational Amplifier ROHSXBLWOperational AmplifierUA741CP
PDIP-8-15V~15V -5V~15V 0℃~+70℃ 1 2.8mA 200nA 40mA 500V/ms 500nA 6mV 90dB Built-in compensation PDIP-8 Operational Amplifier ROHSTexas InstrumentsOperational AmplifierLM358AN
DIP-8-18V~18V -40℃~+85℃ 2 20nA 2nA 3mV 500uA 50mA 5V~36V 700V/ms 700kHz 7uV/℃ 80dB DIP-8 Operational Amplifier ROHSHGSEMIOperational Amplifier
Questions
Is there a KiCad symbol and footprint for the MCP602-I/P?
Yes. The symbol is Amplifier_Operational:MCP602 and the footprint Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPads, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the MCP602-I/P?
PDIP-8, with 8 pins. Its footprint is drawn on this page.
Where is the MCP602-I/P datasheet?
Microchip Technology publishes it: the Datasheet link on this page opens it.
Where can I order the MCP602-I/P?
JLCPCB lists it as part C640402, with 78 in stock; the sellers' links on this page open their listings.
What can replace the MCP602-I/P?
Parts like it in the library: the LM358N by HGSEMI, the LM358N/NOPB by Texas Instruments, the LM741CN/NOPB by Texas Instruments and the NE5532P by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the MCP602-I/P?
51 boards in 39 repositories on GitHub; the most starred are listed on this page, with their KiCad files.