Skip to the content
12345678

UA741CP

Texas InstrumentsExtended

-15V~15V -5V~15V 0℃~+70℃ 1 2.8mA 200nA 40mA 500V/ms 500nA 6mV 90dB Built-in compensation PDIP-8 Operational Amplifier ROHS

Part id
ti/UA741CP
Category
Operational Amplifier
Package
PDIP-8
Pins
8
In stock
2,047 at JLCPCB (C78758)
Used on
3 open-source boards

Overview

The UA741CP is an operational Amplifier made by Texas Instruments in a PDIP-8 package with 8 pins. -15V~15V -5V~15V 0℃~+70℃ 1 2.8mA 200nA 40mA 500V/ms 500nA 6mV 90dB Built-in compensation PDIP-8 Operational Amplifier ROHS.

PCBKit's library has its KiCad symbol (dk_Linear-Amplifiers-Instrumentation-OP-Amps-Buffer-Amps:UA741CP_NonStock, from Digikey) and its footprint (Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPads, from KiCad's library), ready for a KiCad board. 2,047 are in stock at JLCPCB (part C78758). 3 open-source boards in 3 repositories on GitHub use it.

Symbol

1OFF_N1234VCC-5OFF_N267VCC+8NC
dk_Linear-Amplifiers-Instrumentation-OP-Amps-Buffer-Amps:UA741CP_NonStockFrom Digikey

Footprint

12345678
Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPadsFrom KiCad's library

Pinout

8
The pins of the UA741CP
PinNameType
1OFF_N1Input
2—Input
3—Input
4VCC-Power in
5OFF_N2Input
6—Output
7VCC+Power in
8NCNot connected

Open-source boards using it

3
  • 2 layers165.1 × 154.9 mmPCB Prototipo Proyecto Final, the printed circuit board in 3D

    PCB Prototipo Proyecto Final

    FrancoBisciglia/ProyectoFinal_PCB_Prototipo

    PCB de la placa prototipo del Sistema de Automatización para Huertas Hidropónicas NFT

    151 parts
  • 4 layers102 × 150 mmGenerator dds, the printed circuit board in 3D

    Generator dds

    kpatrykEIT/DDS_generator_ATmega32u4

    Programmable periodic waveform generator based on the ATmega32U4 microcontroller and a DAC

    47 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the UA741CP?

Yes. The symbol is dk_Linear-Amplifiers-Instrumentation-OP-Amps-Buffer-Amps:UA741CP_NonStock and the footprint Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPads, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the UA741CP?

PDIP-8, with 8 pins. Its footprint is drawn on this page.

Where is the UA741CP datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the UA741CP?

JLCPCB lists it as part C78758, with 2,047 in stock; the sellers' links on this page open their listings.

What can replace the UA741CP?

Parts like it in the library: the LM358N/NOPB by Texas Instruments, the LM358N(XBLW) by XBLW, the LM358AN by HGSEMI and the CA3140EZ by Renesas Electronics. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the UA741CP?

3 boards in 3 repositories on GitHub; the most starred are listed on this page, with their KiCad files.