
Pico expansion board
eamars/RaspberryPi-Pico-Motor-Expansion-Board
A raspberry pi pico expansion board designed for OpenTrickler project

HUB75 matrix display shield controlled by a Raspberry Pi Pico W
HUB75 RP2840 is an open-source printed circuit board by mortens-lab, from the mortens-lab/HUB75-PICO-shield repository on GitHub. It is a 2-layer board of 150 × 150 mm with 50 parts on 66 nets, routed with 398 tracks and 264 vias.
It is built around the 74HC245D, TPS5450DDA and B540C. Its parts include 10 capacitors, 8 resistors, 6 connectors, 4 ICs and 3 switches. It belongs with the lEDs and displays boards and the RP2040 boards of this library.
HUB75 matrix display shield controlled by a Raspberry Pi Pico W
KiCad 7.0 files for shield
Link to youtube video : (https://youtu.be/hoFy992Y98c)
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | MountingHole | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H1, H2, H3, H4, H5, H6, H7, H8 |
| 5 | 100n | Capacitor_SMD:C_0603_1608Metric | C1, C6, C7, C10, C12 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H9, H10, H11, H12 |
| 3 | 0R | Resistor_SMD:R_0603_1608Metric | R9, R10, R11 |
| 2 | 10K | Resistor_SMD:R_0603_1608Metric | R2, R7 |
| 2 | 4.7u/50V | Capacitor_SMD:C_1812_4532Metric | C8, C9 |
| 2 | 470u | Capacitor_SMD:CP_Elec_8x10 | C14, C15 |
| 2 | 74HC245 | Package_SO:SOIC-20W_7.5x12.8mm_P1.27mm | U2, U4 |
| 2 | CON2 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | CON2, CON3 |
| 2 | SW_DPST_x2 | Button_Switch_SMD:SW_SPST_Omron_B3FS-100xP | SW2, SW3 |
| 1 | 15uH | Inductor_SMD:L_12x12mm_H8mm | L1 |
| 1 | 1K | Resistor_SMD:R_0603_1608Metric | R8 |
| 1 | 3.16K | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | 330u | Capacitor_SMD:CP_Elec_6.3x7.7 | C11 |
| 1 | B540C | Diode_SMD:D_SMC | D2 |
| 1 | CON3 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-3-5.08_1x03_P5.08mm_Horizontal | CON1 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | Conn_02x05_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | J3 |
| 1 | Conn_02x08_Odd_Even | Connector_IDC:IDC-Header_2x08_P2.54mm_Vertical | J1 |
| 1 | LDR03 | OptoDevice:R_LDR_10x8.5mm_P7.6mm_Vertical | R6 |
| 1 | PWR-JAKPWR_JACK_UNI_MILLING | REV-I:PWRJ-2mm(YDJ-1136) | PWR1 |
| 1 | Pico | Morten_2023_Library:RPi_Pico_WSMD_TH | U6 |
| 1 | SW_DPST_x2 | Button_Switch_THT:SW_Tactile_SPST_Angled_PTS645Vx31-2LFS | SW1 |
| 1 | TPS5450DDA | Package_SO:TI_SO-PowerPAD-8_ThermalVias | U5 |
The 46 most common of 50 parts.

eamars/RaspberryPi-Pico-Motor-Expansion-Board
A raspberry pi pico expansion board designed for OpenTrickler project

Icey7122/AM32_AI8051U
Using PWMA to output 3 sets of complementary PWM for driving MOSFEET, Using PWMB for capturing external throttle signals, Using ADC to sample voltage and current, for low voltage protection and over current…

Cloud-Lightning/ESP32_Distribution_board
text BUS+ / GND |-- 7 x XT30 原始总线电源分配 | -- TPS5450DDA --> +5V --> AMS1117-3.3 --> +3.3V | | | -- ESP32、CH340K、逻辑电路 -- 5V 外设接口


SEAS2025/mmwave-deer-scan
mmWave FMCW radar deer detection for roadside ambulance safety


mgalleguilloscespedes-png/proyectro-stm32
en mi afán por el diseño 3d y la electrónica decidí crear mi propia versión de una placa controladora para impresora 3d, basándome en el microcontrolador stm32h723zet6 y la pcb de bigtreetech manta mp8

It measures 150 × 150 mm and has 2 copper layers, 1.6 mm thick.
50 parts, built around the 74HC245D, TPS5450DDA and B540C. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the mortens-lab/HUB75-PICO-shield repository on GitHub, at the commit this page was made from: the board is HUB75_RP2840.kicad_pcb and its schematic HUB75_RP2840.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask mortens-lab before reusing the design.