

FYP PCB
- Size
- 100 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 140
- Nets
- 96
- Pads
- 603
- Tracks, vias
- 997, 137
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 18 Feb 2020
- Updated
- 18 Feb 2020
Overview
FYP PCB is an open-source printed circuit board by usmanmehmood55, from the usmanmehmood55/FYP-PCB repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 100 × 100 mm with 140 parts on 96 nets, routed with 997 tracks and 137 vias.
It is built around the ESP32-WROOM-32D, TPS5450DDA and DRV8840PWP, with the CH340G, ESDA6V8AV5 and LSF0204PW among its other parts. Its parts include 46 capacitors, 36 resistors, 11 ICs, 8 diodes and 5 inductors. It belongs with the ESP32 boards of this library.
Main components
7ESP32-WROOM-32D
-- WiFi Modules ROHSEspressif SystemsWiFi ModulesTPS5450DDA
SOP-8-EP-40℃~+125℃@(TJ) 1 1.22V~36V 18uA 5.5V~36V 500kHz 5A Adjustable Buck Built-in Overcurrent Protection、Cycle-by-cycle current limiting、Hiccup current limiting Step-down type Yes SOP-8-EP DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersDRV8840PWP
HTSSOP-28-EPCurrent sensing/regulation function、Active braking function HTSSOP-28-EP Brushed DC Motor Drivers ROHSTexas InstrumentsBrushed DC Motor DriversCH340G
SOP-16-40℃~+85℃ 2Mbps 3.3V、5V USB 2.0 USB to UART SOP-16 USB Converters ROHSWCH (Nanjing Qinheng Microelectronics)USB ConvertersESDA6V8AV5
SOT-5X3-5-55℃~+150℃ 100nA 12V 3.5pF 5V 6.5V ESD IEC 61000-4-2、IEC 61000-4-4 SOT-5X3-5 ESD and Surge Protection (TVS/ESD) ROHSTECH PUBLICESD And Surge Protection (TVS/ESD)LSF0204PW
TSSOP-14-40℃~+125℃ 1 1.8V~5.5V 4 800mV~4.5V Auto Direction Detection Bidirectional Push-Pull、Open-drain TTL TSSOP-14 Translators, Level Shifters ROHSTexas InstrumentsTranslators, Level ShiftersBSS138
SOT-23-55℃~+150℃ 1 N-channel 1.1Ω@10V、1.2Ω@4.5V 1.2V 1.7nC@10V 17.5pF 340mA 350mW 50V 6.5pF N-Channel SOT-23 MOSFETs ROHShongjiachengMOSFETs
README
README.mdFYP-PCB
Parts
140| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 10K | Resistor_SMD:R_0805_2012Metric | R1, R4, R5, R6, R24, R25, R26, R27, R28, R29, R30, R31 |
| 11 | 4.7uF | Capacitor_Tantalum_SMD:CP_EIA-3528-15_AVX-H | C14, C17, C20, C23, C26, C29, C32, C35, C37, C38, C42 |
| 8 | 100nF | Capacitor_SMD:C_0805_2012Metric | C4, C9, C11, C13, C19, C25, C31, C43 |
| 8 | 220nF | Capacitor_Tantalum_SMD:CP_EIA-3216-18_Kemet-A | C15, C18, C21, C24, C27, C30, C33, C36 |
| 6 | 0.1uF | Capacitor_SMD:C_0805_2012Metric | C2, C3, C5, C6, C7, C8 |
| 5 | 5A | Diode_SMD:D_SMC | D4, D5, D6, D7, D8 |
| 4 | 15uH | Inductor_SMD:L_Pulse_PA4320 | L1, L2, L3, L4 |
| 4 | 1K | Resistor_SMD:R_0805_2012Metric | R11, R12, R13, R14 |
| 4 | 2K | Resistor_SMD:R_0805_2012Metric | R15, R16, R17, R18 |
| 4 | 330uF | Capacitor_SMD:CP_Elec_8x10 | C16, C22, C28, C34 |
| 4 | MH | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H1, H2, H3, H4 |
| 4 | TPS5450 | Package_SO:HSOP-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.1mm_ThermalVias | U5, U6, U7, U8 |
| 3 | 83 | Resistor_SMD:R_0805_2012Metric | R21, R22, R23 |
| 3 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1, D2, D3 |
| 2 | 0.1R | Resistor_SMD:R_2512_6332Metric | R7, R9 |
| 2 | 100uF | Capacitor_SMD:CP_Elec_8x10 | C10, C12 |
| 2 | 10K | Resistor_SMD:R_1206_3216Metric | R19, R20 |
| 2 | 10nF | Capacitor_SMD:C_0805_2012Metric | C40, C44 |
| 2 | 1M | Resistor_SMD:R_0805_2012Metric | R2, R3 |
| 2 | 1uF | Capacitor_SMD:C_0805_2012Metric | C1, C39 |
| 2 | 22pF | Capacitor_SMD:C_0805_2012Metric | C45, C46 |
| 2 | 31K | Resistor_SMD:R_0805_2012Metric | R8, R10 |
| 2 | BSS138 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 2 | DRV8840 | Package_SO:HTSSOP-28-1EP_4.4x9.7mm_P0.65mm_EP3.4x9.5mm_Mask2.4x6.17mm_ThermalVias | U1, U2 |
| 2 | PL37D | Connector_JST:JST_EH_S6B-EH_1x06_P2.50mm_Horizontal | M1, M2 |
| 2 | Servo | Connector_JST:JST_EH_B3B-EH-A_1x03_P2.50mm_Vertical | M3, M4 |
| 2 | SolderJumper_2_Bridged | Jumper:SolderJumper-2_P1.3mm_Bridged2Bar_RoundedPad1.0x1.5mm | JP1, JP2 |
| 2 | iChop | Button_Switch_SMD:SW_DIP_SPSTx05_Slide_6.7x14.26mm_W8.61mm_P2.54mm_LowProfile | SW3, SW4 |
| 1 | +12V_A | TestPoint:TestPoint_Loop_D2.60mm_Drill0.9mm_Beaded | TP1 |
| 1 | +12V_B | TestPoint:TestPoint_Loop_D2.60mm_Drill0.9mm_Beaded | TP2 |
| 1 | +19V | TestPoint:TestPoint_Loop_D2.60mm_Drill0.9mm_Beaded | TP5 |
| 1 | +3.3V | TestPoint:TestPoint_Loop_D2.60mm_Drill0.9mm_Beaded | TP3 |
| 1 | +5V | TestPoint:TestPoint_Loop_D2.60mm_Drill0.9mm_Beaded | TP4 |
| 1 | 100k | Resistor_SMD:R_0805_2012Metric | R33 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric | R32 |
| 1 | 11.1V | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | BT2 |
| 1 | 12MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 14.8V | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | BT1 |
| 1 | 2.2nF | Capacitor_SMD:C_0805_2012Metric | C41 |
| 1 | 2.4uH | Inductor_SMD:L_Pulse_PA4320 | L5 |
| 1 | 20k | Resistor_SMD:R_0805_2012Metric | R35 |
| 1 | 36.5k | Resistor_SMD:R_0805_2012Metric | R34 |
| 1 | 4.7K | Resistor_SMD:R_0805_2012Metric | R36 |
| 1 | BIN | Symbol:WEEE-Logo_4.2x6mm_SilkScreen | BIN |
| 1 | BOOT/FLASH | Button_Switch_SMD:SW_SPST_CK_RS282G05A3 | SW1 |
| 1 | CH340G | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U10 |
| 1 | ESD | Symbol:ESD-Logo_6.6x6mm_SilkScreen | ESD |
| 1 | ESDA6V8AV5 | Package_TO_SOT_SMD:SOT-553 | U11 |
| 1 | ESP32-WROOM-32D | RF_Module:ESP32-WROOM-32 | U3 |
| 1 | LOGO | AU Logo:AU Logo | G*** |
| 1 | LSF0204 | Package_SO:TSSOP-14-1EP_4.4x5mm_P0.65mm | U4 |
| 1 | LT8364 | Package_SO:MSOP-12-16-1EP_3x4mm_P0.5mm_EP1.65x2.85mm_ThermalVias | U9 |
| 1 | OSHW | Symbol:OSHW-Logo2_9.8x8mm_Copper | OSHW |
| 1 | OSHW | Symbol:OSHW-Logo2_9.8x8mm_SilkScreen | OSHW |
| 1 | RESET | Button_Switch_SMD:SW_SPST_CK_RS282G05A3 | SW2 |
| 1 | T-Block | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J3 |
| 1 | UART | Connector_JST:JST_EH_B3B-EH-A_1x03_P2.50mm_Vertical | J1 |
| 1 | USB_B_Mini | Connector_USB:USB_Mini-B_Lumberg_2486_01_Horizontal | J4 |
| 1 | i2c_jetson | Connector_JST:JST_EH_B3B-EH-A_1x03_P2.50mm_Vertical | J2 |
The 139 most common of 140 parts.
Similar boards
- 2 layers62.2 × 33.2 mm

- 4 layers91.7 × 66.8 mm

Pico expansion board
eamars/RaspberryPi-Pico-Motor-Expansion-Board
A raspberry pi pico expansion board designed for OpenTrickler project
68 parts18GPL-3.0 - 2 layers68.5 × 84.2 mm

Am32stc8051u
Icey7122/AM32_AI8051U
Using PWMA to output 3 sets of complementary PWM for driving MOSFEET, Using PWMB for capturing external throttle signals, Using ADC to sample voltage and current, for low voltage protection and over current…
110 parts17 - 2 layers150 × 150 mm

HUB75 RP2840
mortens-lab/HUB75-PICO-shield
HUB75 matrix display shield controlled by a Raspberry Pi Pico W
50 parts16 - 4 layers50 × 50 mm

Pdaltmode
AnterCreeper/pdaltmode
USB Power Delivery Alt-mode Negotiation using CH32X035
88 parts10LGPL-2.1 - 4 layers40.7 × 53.9 mm

Ethernet Interfacing
ahsan105/Ethernet-Interface-PCB-Design-Custom-KiCad-Hardware-Project-
High-speed Ethernet interface hardware design with custom PCB layout, libraries, and 3D models developed in KiCad.
41 parts - 2 layers49 × 40 mm

ESP32
Cloud-Lightning/ESP32_Distribution_board
text BUS+ / GND |-- 7 x XT30 原始总线电源分配 | -- TPS5450DDA --> +5V --> AMS1117-3.3 --> +3.3V | | | -- ESP32、CH340K、逻辑电路 -- 5V 外设接口
61 parts - 2 layers120 × 130 mm

Questions
How big is the FYP PCB PCB?
It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the FYP PCB use?
140 parts, built around the ESP32-WROOM-32D, TPS5450DDA, DRV8840PWP and CH340G. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the FYP PCB KiCad files?
From the usmanmehmood55/FYP-PCB repository on GitHub, at the commit this page was made from: the board is FYP PCB.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the FYP PCB design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).