
Pico expansion board
eamars/RaspberryPi-Pico-Motor-Expansion-Board
A raspberry pi pico expansion board designed for OpenTrickler project

Nucleo F767-Base Board is an open-source printed circuit board by Entruer, from the Entruer/Nucleo-F767-Base-Board repository on GitHub. It is a 2-layer board of 120 × 130 mm with 77 parts on 133 nets, routed with 386 tracks and 73 vias.
It is built around the TPS5450DDA, TLP152 and MC78M09CDTRKG, with the TBD62783APG and RS6G120BGTB1 among its other parts. Its parts include 21 resistors, 17 connectors, 16 diodes, 8 ICs and 7 capacitors.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 1k | Resistor_SMD:R_0603_1608Metric | R9, R15, R16, R17, R18, R19, R20, R21, R22, R23, R24, R25 |
| 12 | LED | LED_SMD:LED_0603_1608Metric | D5, D6, D7, D8, D9, D10, D11, D12, D13, D14, D15, D16 |
| 4 | 10 | Resistor_SMD:R_0603_1608Metric | R1, R3, R5, R7 |
| 4 | 10k | Resistor_SMD:R_0603_1608Metric | R2, R4, R6, R8 |
| 4 | 10u | Capacitor_SMD:C_0603_1608Metric | C1, C2, C5, C8 |
| 4 | Conn_01x02_Pin | Connector_AMASS:AMASS_XT30PW-F_1x02_P2.50mm_Horizontal | J4, J5, J6, J7 |
| 4 | Conn_01x02_Pin | Connector_JST:JST_XA_S02B-XASK-1_1x02_P2.50mm_Horizontal | J14, J15, J16, J17 |
| 4 | D | PDS540:PDS54013 | D1, D2, D3, D4 |
| 4 | RS6G120BGTB1 | MOSFET:DPAK127P_600X120-5N | Q1, Q2, Q3, Q4 |
| 4 | TLP152 | TLP152:5PIN_SO6_TOS | IC1, IC2, IC3, IC4 |
| 3 | 0.1u | Capacitor_SMD:C_0603_1608Metric | C3, C6, C7 |
| 3 | Conn_01x02_Pin | Connector_JST:JST_XA_B02B-XASK-1_1x02_P2.50mm_Vertical | J3, J8, J9 |
| 2 | Conn_01x03_Pin | Connector_JST:JST_XA_B03B-XASK-1_1x03_P2.50mm_Vertical | J20, J21 |
| 2 | Conn_01x03_Pin | Connector_JST:JST_XA_S03B-XASK-1_1x03_P2.50mm_Horizontal | J24, J25 |
| 2 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW1, SW2 |
| 1 | 120 | Resistor_SMD:R_0603_1608Metric | R10 |
| 1 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | Conn_01x02_Pin | Connector_AMASS:AMASS_XT60PW-M_1x02_P7.20mm_Horizontal | J1 |
| 1 | LOGO | library:icon | G*** |
| 1 | MC78M09CDTRKG | MC78M09CDTRKG:VREG_MC78M09CDTRKG | U1 |
| 1 | MCP2551-I-P | Package_DIP:DIP-8_W7.62mm | U6 |
| 1 | NUCLEO-F767ZI | nucleo-f767:ST_NUCLEO-F767ZI | A1 |
| 1 | TBD62783A | Package_SO:SOIC-18W_7.5x11.6mm_P1.27mm | U4 |
| 1 | TPS5450 | TPS5450-module:TPS5450-module | U5 |

eamars/RaspberryPi-Pico-Motor-Expansion-Board
A raspberry pi pico expansion board designed for OpenTrickler project

Icey7122/AM32_AI8051U
Using PWMA to output 3 sets of complementary PWM for driving MOSFEET, Using PWMB for capturing external throttle signals, Using ADC to sample voltage and current, for low voltage protection and over current…

mortens-lab/HUB75-PICO-shield
HUB75 matrix display shield controlled by a Raspberry Pi Pico W

Cloud-Lightning/ESP32_Distribution_board
text BUS+ / GND |-- 7 x XT30 原始总线电源分配 | -- TPS5450DDA --> +5V --> AMS1117-3.3 --> +3.3V | | | -- ESP32、CH340K、逻辑电路 -- 5V 外设接口

SEAS2025/mmwave-deer-scan
mmWave FMCW radar deer detection for roadside ambulance safety


mgalleguilloscespedes-png/proyectro-stm32
en mi afán por el diseño 3d y la electrónica decidí crear mi propia versión de una placa controladora para impresora 3d, basándome en el microcontrolador stm32h723zet6 y la pcb de bigtreetech manta mp8

It measures 120 × 130 mm and has 2 copper layers, 1.6 mm thick.
77 parts, built around the TPS5450DDA, TLP152, MC78M09CDTRKG and TBD62783APG. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Entruer/Nucleo-F767-Base-Board repository on GitHub, at the commit this page was made from: the board is Nucleo-F767-Base-Board.kicad_pcb and its schematic Nucleo-F767-Base-Board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Entruer before reusing the design.