
ESP32
Cloud-Lightning/ESP32_Distribution_board
text BUS+ / GND |-- 7 x XT30 原始总线电源分配 | -- TPS5450DDA --> +5V --> AMS1117-3.3 --> +3.3V | | | -- ESP32、CH340K、逻辑电路 -- 5V 外设接口

mmWave FMCW radar deer detection for roadside ambulance safety
DeerWatch Carrier is an open-source printed circuit board by SEAS2025, from the SEAS2025/mmwave-deer-scan repository on GitHub. It is a 2-layer board of 70 × 50 mm with 39 parts on 23 nets, routed with 579 tracks and 28 vias.
It is built around the SN65HVD230D, TPS5450DDA and AMS1117-3.3, with the MMBT2222A, SI2301 and SMBJ16A among its other parts. Its parts include 10 capacitors, 8 resistors, 4 connectors, 3 ICs and 3 diodes.
Roadside mmWave radar deer detection for ambulance / fleet safety — companion to agm-taipan-deer-scan (thermal).
Detect deer from FMCW point clouds using size, speed, and SNR heuristics. Designed for TI mmWave UART JSON output and a simulated feed for development without hardware.
mmwave_deer/imaging/), with a synthetic walking-deer demo| Doc | What |
|---|---|
| docs/SYSTEM_DESIGN.md | architecture, sensor/compute/power, requirements, risks |
| docs/BOM.md / docs/bom.csv | parts, links, cost roll-up (proto ~$400, prod target ~$140) |
| docs/INTEGRATION.md | block diagram, power tree, GPIO map, wiring, sequence |
| hardware/README.md | enclosure drawing + carrier PCB |
| hardware/enclosure/orthographic.svg | dimensioned 3-view drawing |
| hardware/pcb/carrier_board/ | Gerbers + DeerWatch-Carrier-gerbers.zip for JLCPCB |
| hardware/pcb/carrier_board/kicad/ | KiCad 10 project, DRC-clean, KiCad-exported Gerbers + 3D render |
| docs/VARIANT_AWR1843.md | 77 GHz AWR1843BOOST variant - range math, config, carrier + BOM delta |
| docs/IMAGING_RADAR_BOM.md | imaging-radar tiers (raw capture / AWR2243 cascade / 4D) - parts + compute |
cd mmwave-deer-scan
pip install -r requirements.txt
python scripts/live_scanner.py --demoOr double-click launch_scanner.bat.
Primary target: Texas Instruments mmWave EVM (IWR6843 / AWR1843) with point-cloud UART JSON output.
config/default.yaml — set reader.type: ti_mmwave and reader.portpython scripts/live_scanner.py --reader ti_mmwave --port COM3On the Raspberry Pi with the carrier board (buzzer/LED + thermal fusion):
python scripts/live_scanner.py --reader ti_mmwave --port /dev/ttyACM0 --outputs --fusion confirmpython scripts/record_session.py --reader ti_mmwave --port COM3 --seconds 120Micro-Doppler signature + ISAR image formation from raw ADC. Runs on synthetic data; feed a captured cube (DCA1000 / cascade) for real targets. See docs/IMAGING_RADAR_BOM.md.
python scripts/microdoppler_demo.py --out samplespytest tests/| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 100k | deerwatch:R5 | R5 |
| 1 | 100nF | deerwatch:C7 | C7 |
| 1 | 100nF | deerwatch:C8 | C8 |
| 1 | 100nF | deerwatch:C9 | C9 |
| 1 | 100uF | deerwatch:C2 | C2 |
| 1 | 100uF | deerwatch:C1 | C1 |
| 1 | 10k | deerwatch:R7 | R7 |
| 1 | 10nF | deerwatch:C10 | C10 |
| 1 | 10uF | deerwatch:C3 | C3 |
| 1 | 10uF | deerwatch:C5 | C5 |
| 1 | 10uF | deerwatch:C6 | C6 |
| 1 | 10uF | deerwatch:C4 | C4 |
| 1 | 120 | deerwatch:R6 | R6 |
| 1 | 12V_IN | deerwatch:J1 | J1 |
| 1 | 1k | deerwatch:R4 | R4 |
| 1 | 3.16k | deerwatch:R8 | R8 |
| 1 | 330 | deerwatch:R1 | R1 |
| 1 | 330 | deerwatch:R3 | R3 |
| 1 | 330 | deerwatch:R2 | R2 |
| 1 | 33uH | deerwatch:L1 | L1 |
| 1 | AMS1117-3.3 | deerwatch:U2 | U2 |
| 1 | BUZZER | deerwatch:BZ1 | BZ1 |
| 1 | CAN | deerwatch:J2 | J2 |
| 1 | CAN_D | deerwatch:TP1 | TP1 |
| 1 | CAN_R | deerwatch:TP2 | TP2 |
| 1 | M3 | deerwatch:MH2 | MH2 |
| 1 | M3 | deerwatch:MH4 | MH4 |
| 1 | M3 | deerwatch:MH3 | MH3 |
| 1 | M3 | deerwatch:MH1 | MH1 |
| 1 | MMBT2222A | deerwatch:Q2 | Q2 |
| 1 | MUTE | deerwatch:SW1 | SW1 |
| 1 | RADAR_5V | deerwatch:J4 | J4 |
| 1 | RGB5050 | deerwatch:D3 | D3 |
| 1 | RPi_2x20 | deerwatch:J3 | J3 |
| 1 | SI2301 | deerwatch:Q1 | Q1 |
| 1 | SMBJ16A | deerwatch:D1 | D1 |
| 1 | SN65HVD230 | deerwatch:U3 | U3 |
| 1 | SS34 | deerwatch:D2 | D2 |
| 1 | TPS5450 | deerwatch:U1 | U1 |

Cloud-Lightning/ESP32_Distribution_board
text BUS+ / GND |-- 7 x XT30 原始总线电源分配 | -- TPS5450DDA --> +5V --> AMS1117-3.3 --> +3.3V | | | -- ESP32、CH340K、逻辑电路 -- 5V 外设接口

eamars/RaspberryPi-Pico-Motor-Expansion-Board
A raspberry pi pico expansion board designed for OpenTrickler project

potpurri/A1-External-ESP8266-Cooling-Fan-Module
ESP8266-board driving an external fan for improved cooling of nozzle and prints


shawnsony07/smart-grid-fault-detector
An ATmega328P-based smart grid fault detector featuring high-side current sensing via INA180A1 and voltage monitoring.



luftaquila/monolith
DIY wireless real-time datalogging platform for Student Formula and Baja.
It measures 70 × 50 mm and has 2 copper layers, 1.6 mm thick.
39 parts, built around the SN65HVD230D, TPS5450DDA, AMS1117-3.3 and MMBT2222A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the SEAS2025/mmwave-deer-scan repository on GitHub, at the commit this page was made from: the board is hardware/pcb/carrier_board/kicad/DeerWatch-Carrier.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask SEAS2025 before reusing the design.