4 layers100 × 90 mm
Vbench pod
embeddedci-com/benchpod
An open hardware bench tool that plugs into your CI: sensor sim, CAN, analog I/O, power control, and a Python SDK with pytest integration
536 parts2CERN-OHL-W-2.0
2 layers70.2 × 49 mm
RFID Platine
FREILab/RFID-Box-3D- Size
- 70.2 × 49 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 47
- Nets
- 51
- Pads
- 133
- Tracks, vias
- 219, 10
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 19 Sep 2023
- Updated
- 25 Oct 2026
Overview
RFID Platine is an open-source printed circuit board by FREILab, from the FREILab/RFID-Box-3D repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 70.2 × 49 mm with 47 parts on 51 nets, routed with 219 tracks and 10 vias.
It is built around the VO615A-2X009T, SI2310AHE3-TP and SMAJ36CA, with the SS26 among its other parts. Its parts include 16 resistors, 9 diodes, 7 connectors, 3 capacitors and 3 ICs. It belongs with the radio and wireless boards and the ESP32 boards of this library.
Main components
4
VO615A-2X009T
SMD-4PTransistor, Photovoltaic Output OptoisolatorsVishay Intertechnology
SI2310AHE3-TP
SOT-23-55℃~+150℃ 1 N-channel 1.2W 10.27nC@10V 120mΩ@4.5V 3A 409pF 41pF 60V 900mV SOT-23 MOSFETs ROHSMicro Commercial ComponentsMOSFETs
SMAJ36CA
DO-214AC(SMA)-55℃~+150℃ 36V 400W 40V 58.1V 5uA 6.9A Bidirectional TVS DO-214AC(SMA) ESD and Surge Protection (TVS/ESD) ROHSGOODWORKESD And Surge Protection (TVS/ESD)SS26
DO-214AC(SMA)2A 500uA 60V 700mV Independent DO-214AC(SMA) Schottky Diodes ROHSElecSuperSchottky Diodes
README
README.mdRFID-Box-3D
Parts
47| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 100R | Resistor_SMD:R_0805_2012Metric | R12, R13, R14, R15 |
| 4 | 10k | Resistor_SMD:R_0603_1608Metric | R7, R10, R11, R16 |
| 4 | 2k2 | Resistor_SMD:R_0603_1608Metric | R1, R2, R6, R8 |
| 4 | MountingHole | MountingHole:MountingHole_4mm | H1, H2, H3, H4 |
| 3 | 10µF | Capacitor_SMD:C_0805_2012Metric | C1, C2, C3 |
| 3 | LED G | LED_SMD:LED_0603_1608Metric | D2, D3, D6 |
| 2 | 3k3 | Resistor_SMD:R_0603_1608Metric | R5, R9 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | 200mA T | Fuse:Fuse_Schurter_UMZ250 | F1 |
| 1 | 24V_IN | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-2-3.5-H_1x02_P3.50mm_Horizontal | J1 |
| 1 | 375mA T | Fuse:Fuse_Littelfuse-NANO2-451_453 | F2 |
| 1 | 4.7µH | Inductor_SMD:L_Chilisin_BMRB00060650 | L1 |
| 1 | 510 | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | DEBUG | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J6 |
| 1 | ESP32-DEVKIT-V1 | ESP32-DEVKIT-V1:MODULE_ESP32_DEVKIT_V1 | U3 |
| 1 | LED G THT | LED_THT:LED_D5.0mm_Horizontal_O6.35mm_Z15.0mm | D9 |
| 1 | LED R THT | LED_THT:LED_D5.0mm_Horizontal_O6.35mm_Z15.0mm | D8 |
| 1 | LED Y | LED_SMD:LED_0603_1608Metric | D5 |
| 1 | LED Y THT | LED_THT:LED_D5.0mm_Horizontal_O6.35mm_Z15.0mm | D7 |
| 1 | LOGO | Library:FeiLab_Logo | G*** |
| 1 | RELAIS_OUT | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-2-3.5-H_1x02_P3.50mm_Horizontal | J2 |
| 1 | RFID | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J5 |
| 1 | Reset | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J7 |
| 1 | SI2310AHE3-TP | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | SMAJ36CA | Diode_SMD:D_SMA | D1 |
| 1 | SS26 | Diode_SMD:D_SMA | D4 |
| 1 | TASTER_1 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-2-3.5-H_1x02_P3.50mm_Horizontal | J3 |
| 1 | TASTER_2 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-2-3.5-H_1x02_P3.50mm_Horizontal | J4 |
| 1 | TBA2-2411 | Converter_DCDC:Converter_DCDC_TRACO_TBA2-xxxx_Single_THT | U1 |
| 1 | VO615A-2X009T | Package_DIP:DIP-4_W8.89mm_SMDSocket_LongPads | U2 |
Questions
How big is the RFID Platine PCB?
It measures 70.2 × 49 mm and has 2 copper layers, 1.6 mm thick.
What parts does the RFID Platine use?
47 parts, built around the VO615A-2X009T, SI2310AHE3-TP, SMAJ36CA and SS26. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the RFID Platine KiCad files?
From the FREILab/RFID-Box-3D repository on GitHub, at the commit this page was made from: the board is hw/PCB/RFID_Platine.kicad_pcb and its schematic hw/PCB/RFID_Platine.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the RFID Platine design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 4 layers90 × 95 mm
Wiegand bridge
EdgeCoil/wiegand-bridge
ESP32-S3 Wiegand reader bridge for Home Assistant: 4-layer board, BOM and ESPHome firmware.
197 parts1 - 4 layers55 × 85 mm
SAE Cellular Module
ephrenm/VehiCell
NRF9151-based cellular telemetry device designed for a FSAE EV vehicle.
152 parts - 2 layers100 × 60 mm
- 2 layers100 × 50 mm
Can iso
karimf1/J939-transceiver
This project is an isolated CAN/J1939 transceiver breakout on a 2-layer board. It includes a DE-9 or terminal block and termination jumper.
41 partsMIT - 2 layers59.2 × 89.4 mm
- 2 layers71 × 150.7 mm
DC Motor Speed Controller
Mustafa614/DC-Motor-Controller
This Controller Works 12v to 48v large capacity and supports can bus,rs485 comminication
90 parts - 2 layers200 × 70 mm
FRL RFiD Box
FREILab/easyVerwaltungHardware
Hardware und Firmware für alle Geräte im Bezug zu easyVerwaltung
65 parts2