SMAJ36CA

GOODWORKExtended

-55℃~+150℃ 36V 400W 40V 58.1V 5uA 6.9A Bidirectional TVS DO-214AC(SMA) ESD and Surge Protection (TVS/ESD) ROHS

Part id: goodwork/SMAJ36CA
Category: ESD And Surge Protection (TVS, ESD)
Package: DO-214AC(SMA)
Pins: 2
In stock: 555,888 at JLCPCB (C908830)
Used on: 11 open-source boards

Overview

The SMAJ36CA is an ESD And Surge Protection made by GOODWORK in a DO-214AC(SMA) package with 2 pins. -55℃~+150℃ 36V 400W 40V 58.1V 5uA 6.9A Bidirectional TVS DO-214AC(SMA) ESD and Surge Protection (TVS/ESD) ROHS.

PCBKit's library has its KiCad symbol (Diode:SMAJ36CA, from KiCad's library) and its footprint (Diode_SMD:D_SMA, from KiCad's library), ready for a KiCad board. 555,888 are in stock at JLCPCB (part C908830). 11 open-source boards in 10 repositories on GitHub use it.

Symbol

Diode:SMAJ36CAFrom KiCad's library

Footprint

Diode_SMD:D_SMAFrom KiCad's library

Pinout

The pins of the SMAJ36CA
Pin	Name	Type
1	A1	Passive
2	A2	Passive

Parameters

Clamping Voltage: 58.1V
Number of Channels: 1
Operating Temperature: -55℃~+150℃
Peak Pulse Current (Ipp): 6.9A
Peak Pulse Power Dissipation (Ppp): 400W
Polarity: Bidirectional
Reverse Leakage Current (Ir): 5uA
Reverse Stand-Off Voltage (Vrwm): 36V
Type: TVS
Voltage - Breakdown: 40V

Order codes

SMAJ36CALCSC C908830

Show this part on your page

<iframe src="https://pcbkit.io/embed/parts/goodwork/SMAJ36CA" title="SMAJ36CA in PCBKit" width="100%" height="480" style="border:0;border-radius:12px" allow="fullscreen" loading="lazy"></iframe>

For any web page: the part itself, turned and zoomed by the reader.

Open-source boards using it

11See all 11

4 layers100 × 90 mm
Vbench pod
embeddedci-com/benchpod
An open hardware bench tool that plugs into your CI: sensor sim, CAN, analog I/O, power control, and a Python SDK with pytest integration
536 parts2CERN-OHL-W-2.0
4 layers90 × 95 mm
Wiegand bridge
EdgeCoil/wiegand-bridge
ESP32-S3 Wiegand reader bridge for Home Assistant: 4-layer board, BOM and ESPHome firmware.
197 parts1
4 layers55 × 85 mm
SAE Cellular Module
ephrenm/VehiCell
NRF9151-based cellular telemetry device designed for a FSAE EV vehicle.
152 parts
2 layers100 × 60 mm
Thermostat
flaviut/thermostat
an home thermostat based on ESPHome
50 partsGPL-3.0
2 layers70.2 × 49 mm
RFID Platine
FREILab/RFID-Box-3D

47 partsGPL-3.0
2 layers100 × 50 mm
Can iso
karimf1/J939-transceiver
This project is an isolated CAN/J1939 transceiver breakout on a 2-layer board. It includes a DE-9 or terminal block and termination jumper.
41 partsMIT
2 layers59.2 × 89.4 mm
CAN Relay
MST-Solar-Car-Team/Can-Relay-Board

28 partsMIT
2 layers71 × 150.7 mm
DC Motor Speed Controller
Mustafa614/DC-Motor-Controller
This Controller Works 12v to 48v large capacity and supports can bus,rs485 comminication
90 parts

Parts like it

Questions

Is there a KiCad symbol and footprint for the SMAJ36CA?

Yes. The symbol is Diode:SMAJ36CA and the footprint Diode_SMD:D_SMA, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the SMAJ36CA?

DO-214AC(SMA), with 2 pins. Its footprint is drawn on this page.

Where is the SMAJ36CA datasheet?

GOODWORK publishes it: the Datasheet link on this page opens it.

Where can I order the SMAJ36CA?

JLCPCB lists it as part C908830, with 555,888 in stock; the sellers' links on this page open their listings.

What can replace the SMAJ36CA?

Parts like it in the library: the SMAJ36CA by Brightking, the SMAJ36A by MDD, the SMAJ36CA by 晶导微电子 and the SMAJ36A by GOODWORK. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the SMAJ36CA?

11 boards in 10 repositories on GitHub; the most starred are listed on this page, with their KiCad files.