
Leonardo Rev3e
trfaa001/Potentiometer-pedals-to-USB
Arduino project that uses potentiometers as game pedals.

CAN Relay is an open-source printed circuit board by MST-Solar-Car-Team, from the MST-Solar-Car-Team/Can-Relay-Board repository on GitHub, published under the MIT licence. It is a 2-layer board of 59.2 × 89.4 mm with 28 parts on 46 nets, routed with 209 tracks and 17 vias.
It is built around the ADM3057EBRWZ, BTS716GB and REG1117-5, with the BCS-114-L-S-PE-BE and SMAJ36CA among its other parts. Its parts include 10 diodes, 5 connectors, 4 capacitors, 4 ICs and 2 resistors. It belongs with the home automation and IoT boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | D | RRE02VTM4SFHTR:DIO_RRE02VSM_ROM | D3, D4, D5, D6, D7, D8, D9, D10 |
| 2 | 100BR | RN73C2B100RBTDF:RESC3015X65N | L1, L2 |
| 2 | 10U | Cap10U:CAPC2012X145N | C4, C5 |
| 2 | 691305340008 | 691305340008:691305340008 | J4, J5 |
| 2 | BCS-114-L-S-PE-BE | BCS:SAMTEC_BCS-114-L-S-PE-BE | J2, J3 |
| 2 | BTS716GB | BTS716GB:SOIC127P1032X265-20N | U2, U3 |
| 2 | SMAJ36CA | SMAJ36CA:SMASERIES-M | D1, D2 |
| 1 | 10R | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | 1U | GRT155C80J105KE01J:CAPC1005X55N | C2 |
| 1 | 430450601 | MolexConnector:MOLEX_430450601 | J1 |
| 1 | 4U7 | GRM188R61E475KE11D:CAPC1608X95N | C1 |
| 1 | ADM3057EBRWZ | ADM3057EBRWZ:SOIC127P1032X265-20N | U4 |
| 1 | Fuse | C1F-5:FUSC3215X83N | F1 |
| 1 | R8 | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | REG1117-5 | REG1117-5:SOT230P700X180-4N | IC1 |

trfaa001/Potentiometer-pedals-to-USB
Arduino project that uses potentiometers as game pedals.


Obili69/E-GoCart
Vehicle Control Unit (VCU) firmware for an electric go-kart, built on ESP32-S3 with FreeRTOS. Manages motor control, battery management, charging, telemetry, and safety systems over dual CAN buses.

embeddedci-com/benchpod
An open hardware bench tool that plugs into your CI: sensor sim, CAN, analog I/O, power control, and a Python SDK with pytest integration

EdgeCoil/wiegand-bridge
ESP32-S3 Wiegand reader bridge for Home Assistant: 4-layer board, BOM and ESPHome firmware.

ephrenm/VehiCell
NRF9151-based cellular telemetry device designed for a FSAE EV vehicle.


It measures 59.2 × 89.4 mm and has 2 copper layers, 1.6 mm thick.
28 parts, built around the ADM3057EBRWZ, BTS716GB, REG1117-5 and BCS-114-L-S-PE-BE. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the MST-Solar-Car-Team/Can-Relay-Board repository on GitHub, at the commit this page was made from: the board is CAN_Relay.kicad_pcb and its schematic CAN_Relay.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).