Skip to the content

Boards using the DW01

48 boards

Boards in 42 GitHub repositories, designed in KiCad, that use the DW01 by Guangdong Hottech (-40℃~+85℃ 1 1.5V~8V 2.4V 4.3V 4uA Lithium Battery Not supported Overcharge protection、Over-discharge protection、Overcurrent Protection、Short-Circuit Protection Protection IC Support SOT-23-6 Battery Management ROHS). See how each wires it, with its parts, size, README and files; the DW01’s symbol, footprint and pinout are on its own page.

  • 2 layersCharger stepup, the printed circuit board in 3D

    Charger stepup

    Aplyard/Oled-Clicker

    Clicker Counter for Arduino Nano

    19 parts117BSD-3-Clause
  • 2 layers84 × 98 mmJoule Chief, the printed circuit board in 3D

    Joule Chief

    fishPointer/Joule-Thief

    I teach myself new skills by designing projects that require to develop the skills I want in order to complete them.

    93 parts25MIT
  • 2 layers111.3 × 87.7 mmCorne choc xiao, the printed circuit board in 3D

    Corne choc xiao

    tufourn/corne-choc-xiao

    Corne keyboard with XIAO BLE microcontroller and LIR2032 support

    51 parts21
  • 2 layers32 × 32 mmTuxmini v03, the printed circuit board in 3D

    Tuxmini v03

    tux-friend/tux-cube

    Physics Sensor Cube Tux³

    83 parts18GPL-3.0
  • 4 layers42.3 × 69.7 mmECG 2.0, the printed circuit board in 3D

    ECG 2.0

    17jwk3/ECG_Li

    Real-time Wearable-based Cardiac Monitoring with Machine Learning

    50 parts13MIT
  • 2 layers159 × 140.1 mmPhazor, the printed circuit board in 3D

    Phazor

    skrmsh/skirmish-hardware

    Skirmish Hardware © 2022-2023 by Ole Lange is licensed under CC BY-NC-SA 4.0. To view a copy of this license, visit http://creativecommons.org/licenses/by-nc-sa/4.0/

    123 parts10
  • 4 layers29.9 × 32 mmModels heart rev1.1, the printed circuit board in 3D

    Models heart rev1.1

    KushlaVR/models-heart

    Можливості: Керування через WIFI з телефона або ПК 5 незалежних каналів (світлодіоди/сервомотори) 1 Н-міст для підключення мотора (піковий струм до 3А) Вмонтована BMS 1S та контроллер заряду Li-Ion акумулятора з…

    106 parts7GPL-3.0
  • 2 layers54.9 × 95 mmBoard v5, the printed circuit board in 3D

    Board v5

    brev-dev/another_esp8266_sensor_board

    PCB layout and instructions for a multi-purpose esp8266 sensor device, with optional LORA connectivity.

    86 parts5GPL-3.0
  • 2 layers160 × 100 mm36C3 Badge Hardware, the printed circuit board in 3D

    36C3 Badge Hardware

    CatoLynx/36C3-Badge

    VFD and LED badge fitting the 36C3 design

    159 parts5GPL-3.0
  • 2 layers60 × 80 mmGalaxy A5 dual node, the printed circuit board in 3D

    Galaxy A5 dual node

    DerRKDCB/meshphone

    meshtastic Samsung Galaxy A5 standalone offline dual node

    87 parts5
  • 2 layers147.4 × 63.2 mmGuitar down octave, the printed circuit board in 3D

    Guitar down octave

    MR-DOS/guitar_down_octave

    A octave-down effect for guitar. All analog, no microcontroller, no DSP.

    219 parts5GPL-3.0
  • 2 layers23.5 × 16 mmTp4056, the printed circuit board in 3D

    Tp4056

    facelesstech/tp4056_replacement_PCB

    tp4056_replacement_PCB

    21 parts4
  • 2 layers80 × 25 mmLedGateController, the printed circuit board in 3D

    LedGateController

    Knifa/ws28xx-led-driver

    A straightforward DIY WS28xx LED driver.

    73 parts3
  • 2 layers179.1 × 63.5 mmBadge-18650, the printed circuit board in 3D

    Badge-18650

    TomKeddie/prj-supercon2022

    65 parts3MIT
  • 2 layers33 × 23.5 mmTP5000 Charger, the printed circuit board in 3D

    TP5000 Charger

    DerRKDCB/TP5000_Charger

    26 parts2
  • 2 layers80 × 50 mmIguana V1, the printed circuit board in 3D

    Iguana V1

    iowlabs/Iguana

    Repositorio para proyecto Iguana IOWLabs (Cultivo)

    120 parts1
  • 2 layers87.5 × 95.5 mmBobuino, the printed circuit board in 3D

    Bobuino

    llegoff/bobuino

    atmega 1284 arduino compatible

    147 parts1
  • 2 layers58 × 28 mmTheKNOBDaughterboard, the printed circuit board in 3D

    TheKNOBDaughterboard

    makerust/TheKNOB

    In: File > Preference > Additional Boards Manager URLS Add: https://dl.espressif.com/dl/packageesp32index.json, http://arduino.esp8266.com/stable/packageesp8266comindex.json Select: Tools > Board > Board Manager Search…

    51 parts1
  • 4 layers322.5 × 183.5 mmDancing forest, the printed circuit board in 3D

    Dancing forest

    sequoia-hope/dancing-forest-pcb

    The PCB design for the Dancing Forest art project

    239 parts1
  • 4 layersHcms watch, the printed circuit board in 3D

    Hcms watch

    elatorre20/hcms_watch

    A watch using an RP2040 to drive an HCMS-29xx display

    54 parts
  • 2 layersRgb ring, the printed circuit board in 3D

    Rgb ring

    emmanuelprakash177-gi/RPI-AI-ASSISTANT

    I want to create an ai assistant . Now a days am very much thinking about it . Then I got an idea to create a ai assistant fully offline. Running fully offline model

    128 parts
  • 2 layers45.3 × 45 mmIAQ Project, the printed circuit board in 3D

    IAQ Project

    fjuliofontes/esp32-iaq-sensor

    Bosch Sensortec BME680 Indoor-air-quality monitor based

    40 parts
  • 2 layers57.2 × 38.1 mmThermal imager, the printed circuit board in 3D

    Thermal imager

    Logarithmus/thermal-imager-project

    My university project for the 6th term

    25 partsGPL-3.0