

Hcms watch
A watch using an RP2040 to drive an HCMS-29xx display
- Copper layers
- 4
- Thickness
- 4.69 mm
- Parts
- 54
- Nets
- 75
- Pads
- 239
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 6 (file 20211014)
- Created
- 4 Jul 2024
- Updated
- 27 Aug 2024
Overview
Hcms watch is an open-source printed circuit board by elatorre20, from the elatorre20/hcms_watch repository on GitHub. It is a 4-layer board with 54 parts on 75 nets.
It is built around the RP2040, W25Q16JVUXIQ and DW01, with the FS8205A and TP4056 among its other parts. Its parts include 20 capacitors, 17 resistors, 7 ICs, 3 switches and 2 diodes. It belongs with the wearables boards and the RP2040 boards of this library.
Main components
5RP2040
LQFN-56(7x7)12bit 133MHz 30 LQFN-56(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)W25Q16JVUXIQ
USON-8-EP(2x3)-40℃~+85℃ 100,000 cycles 10uA 133MHz 16Mbit 2.7V~3.6V 20 Years 3ms SPI USON-8-EP(2x3) NOR FLASH ROHSWinbond ElecNOR FLASHDW01
SOT-23-6-40℃~+85℃ 1 1.5V~8V 2.4V 4.3V 4uA Lithium Battery Not supported Overcharge protection、Over-discharge protection、Overcurrent Protection、Short-Circuit Protection Protection IC Support SOT-23-6 Battery Management ROHSGuangdong HottechBattery ManagementFS8205A
SOT-23-6-55℃~+150℃ 1.2V 1.5W 2 N-Channel 20V 31.5mΩ@2.5V 466pF 5.7nC@4.5V 58pF 65pF 6A SOT-23-6 MOSFETs ROHSTECH PUBLICMOSFETsTP4056
ESOP-8-40℃~+85℃ 1 1A 35uA 4.2V 4V~6.5V Charging IC Lithium Battery Support Support 恒流充电、恒压充电、涓流充电、自动再充电、充电终止、可编程充电电流、软启动、欠压锁定 ESOP-8 Battery Management ROHSUMWBattery Management
Parts
54| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 0.1u | Capacitor_SMD:C_0805_2012Metric | C1, C2, C5, C6, C7, C8, C9, C10, C11, C13 |
| 6 | 5K1 | Resistor_SMD:R_0805_2012Metric | R5, R6, R11, R15, R16, R17 |
| 4 | 1k | Resistor_SMD:R_0805_2012Metric | R2, R10, R12, R13 |
| 3 | 2.2u | Capacitor_SMD:C_0805_2012Metric | C3, C4, C12 |
| 3 | SW_Push | Button_Switch_THT:6MM_slim_pushbutton | SW1, SW2, SW3 |
| 2 | 0.1uF | Capacitor_SMD:C_0805_2012Metric | C18, C20 |
| 2 | 10k | Resistor_SMD:R_0805_2012Metric | R1, R9 |
| 2 | 10uf | Capacitor_SMD:C_0805_2012Metric | C16, C17 |
| 2 | 15p | Capacitor_SMD:C_0805_2012Metric | C14, C15 |
| 2 | 22R | Resistor_SMD:R_0805_2012Metric | R3, R4 |
| 1 | 0R | Resistor_SMD:R_0805_2012Metric | R14 |
| 1 | 100 | Resistor_SMD:R_0805_2012Metric | R8 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric | C19 |
| 1 | 47k | Resistor_SMD:R_0805_2012Metric | R7 |
| 1 | 47uh | Inductor_SMD:L_Neosid_SMS-ME3015 | L1 |
| 1 | ABMB-272-T3 | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | Conn_01x02_Female | Connector_PinHeader_1.00mm:PinHeader_1x02_P1.00mm_Vertical | J2 |
| 1 | DW01 | Package_TO_SOT_SMD:SOT-23-6_Handsoldering | U5 |
| 1 | FS8205A | Package_TO_SOT_SMD:SOT-23-6_Handsoldering | U7 |
| 1 | GREEN | LED_SMD:LED_0805_2012Metric | D2 |
| 1 | HCMS-2975 | Package_DIP:DIP26_HCMS-290X-E_BRA | U3 |
| 1 | MT92165 | Package_TO_SOT_SMD:SOT-23-5 | U4 |
| 1 | RED | LED_SMD:LED_0805_2012Metric | D1 |
| 1 | RP2040 | Package_QFP:RP2040-QFN-56 | U2 |
| 1 | TP4056 | Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm | U6 |
| 1 | TestPoint_2Pole | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | TP1 |
| 1 | USB_C_Receptacle | Connector_USB:USB_C_Receptacle_XKB_U262-16XN-4BVC11 | J1 |
| 1 | W25Q16JVUXIQ | Package_SON:SON-8_2x3MM | IC1 |
Similar boards
- 2 layers

- 2 layers84 × 98 mm

Joule Chief
fishPointer/Joule-Thief
I teach myself new skills by designing projects that require to develop the skills I want in order to complete them.
93 parts25MIT - 2 layers32 × 32 mm

- 2 layers159 × 140.1 mm

Phazor
skrmsh/skirmish-hardware
Skirmish Hardware © 2022-2023 by Ole Lange is licensed under CC BY-NC-SA 4.0. To view a copy of this license, visit http://creativecommons.org/licenses/by-nc-sa/4.0/
123 parts10 - 2 layers80 × 25 mm

- 2 layers80 × 50 mm

- 4 layers322.5 × 183.5 mm

Dancing forest
sequoia-hope/dancing-forest-pcb
The PCB design for the Dancing Forest art project
239 parts1 - 2 layers

Rgb ring
emmanuelprakash177-gi/RPI-AI-ASSISTANT
I want to create an ai assistant . Now a days am very much thinking about it . Then I got an idea to create a ai assistant fully offline. Running fully offline model
128 parts
Questions
What parts does the Hcms watch use?
54 parts, built around the RP2040, W25Q16JVUXIQ, DW01 and FS8205A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Hcms watch KiCad files?
From the elatorre20/hcms_watch repository on GitHub, at the commit this page was made from: the board is hardware/hcms_watch/hcms_watch.kicad_pcb and its schematic hardware/hcms_watch/hcms_watch.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Hcms watch design in my own project?
Its repository states no licence, so its author keeps all rights: ask elatorre20 before reusing the design.