

LedGateController
A straightforward DIY WS28xx LED driver.
- Size
- 80 × 25 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 73
- Nets
- 44
- Pads
- 231
- Tracks, vias
- 408, 97
- Pours
- 11
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 28 Apr 2020
- Updated
- 30 Mar 2021
Overview
LedGateController is an open-source printed circuit board by Knifa, from the Knifa/ws28xx-led-driver repository on GitHub. It is a 2-layer board of 80 × 25 mm with 73 parts on 44 nets, routed with 408 tracks and 97 vias.
It is built around the MT3608, DW01 and XC6206P332MR, with the AO3401A, AO3400A and FS8205A among its other parts. Its parts include 24 resistors, 19 capacitors, 6 transistors, 5 ICs and 5 diodes. It belongs with the STM32 boards of this library.
Main components
8MT3608
SOT-23-6-40℃~+85℃ 1 1.2MHz 100uA、1.6mA 2A 2V~24V Adjustable Boost Boost Built-in No SOT-23-6 DC-DC Converters ROHS西安航天民芯DC-DC ConvertersDW01
SOT-23-6-40℃~+85℃ 1 1.5V~8V 2.4V 4.3V 4uA Lithium Battery Not supported Overcharge protection、Over-discharge protection、Overcurrent Protection、Short-Circuit Protection Protection IC Support SOT-23-6 Battery Management ROHSGuangdong HottechBattery ManagementXC6206P332MR
SOT-23-40℃~+85℃@(Ta) 1 1uA 200mA 3.3V 6V Fixed Over Current Protection Positive SOT-23-3L Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTorex SemiconductorVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsAO3401A
SOT-231 P-Channel 14nC@10V 30V 47mΩ@10V、60mΩ@4.5V、85mΩ@2.5V 4A 55pF 645pF 80pF 900mV SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETsAO3400A
SOT-23-55℃~+150℃ 1 N-channel 1.45V 1.4W 30V 48mΩ@2.5V 5.7A 50pF 630pF 75pF 7nC@10V N-Channel SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETsFS8205A
SOT-23-6-55℃~+150℃ 1.2V 1.5W 2 N-Channel 20V 31.5mΩ@2.5V 466pF 5.7nC@4.5V 58pF 65pF 6A SOT-23-6 MOSFETs ROHSTECH PUBLICMOSFETsSS22
SMA(DO-214AC)20V 2A 500uA@20V 550mV@2A Independent SMA(DO-214AC) Schottky Diodes ROHSKUUSchottky DiodesTP4056
ESOP-8-40℃~+85℃ 1 1A 35uA 4.2V 4V~6.5V Charging IC Lithium Battery Support Support 恒流充电、恒压充电、涓流充电、自动再充电、充电终止、可编程充电电流、软启动、欠压锁定 ESOP-8 Battery Management ROHSUMWBattery Management
README
README.mdws28xx-led-driver

This is a straightforward DIY WS28xx LED driver. It's got these features:
- STM32F103C8T6 used as the microcontroller.
- Intended to be powered by a single-cell Li-ion battery, with USB charging and cell protection.
- 5V 1.5Aish step-up for LED power.
- Single button for soft-power and settings.
- 0805 SMD components or thereabouts.
License
- Firmware under MIT License.
- Hardware under CC-BY-SA-4.0.
Parts
73| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 100n | Capacitor_SMD:C_0805_2012Metric | C1, C3, C4, C5, C7, C12, C14, C16, C17 |
| 8 | 100K | Resistor_SMD:R_0805_2012Metric | R7, R11, R12, R16, R18, R19, R20, R23 |
| 4 | 100 | Resistor_SMD:R_0805_2012Metric | R1, R2, R6, R17 |
| 4 | AO3401A | Package_TO_SOT_SMD:SOT-23 | Q2, Q3, Q4, Q6 |
| 3 | 1K | Resistor_SMD:R_0805_2012Metric | R5, R13, R14 |
| 3 | 1u | Capacitor_SMD:C_0805_2012Metric | C10, C11, C15 |
| 3 | 4u7 | Capacitor_SMD:C_0805_2012Metric | C6, C18, C19 |
| 2 | 1.5K | Resistor_SMD:R_0805_2012Metric | R21, R22 |
| 2 | 22u | Capacitor_SMD:C_0805_2012Metric | C2, C9 |
| 2 | 250 | Resistor_SMD:R_0805_2012Metric | R8, R24 |
| 2 | D_x2_KCom_AAK | Package_TO_SOT_SMD:SOT-23 | D3, D4 |
| 2 | MountingHole_3.2mm_M3_ISO7380 | MountingHole:MountingHole_3.2mm_M3_ISO7380 | , |
| 1 | +BATT | LedGateController:Battery Pad | + |
| 1 | -BATT | LedGateController:Battery Pad | J7 |
| 1 | 10n | Capacitor_SMD:C_0805_2012Metric | C8 |
| 1 | 110K | Resistor_SMD:R_0805_2012Metric | R4 |
| 1 | 150K | Resistor_SMD:R_0805_2012Metric | R10 |
| 1 | 15K | Resistor_SMD:R_0805_2012Metric | R3 |
| 1 | 1K5 | Resistor_SMD:R_0805_2012Metric | R15 |
| 1 | 22u | LedGateController:YT1040-220M | L1 |
| 1 | 470u | Capacitor_SMD:CP_Elec_10x7.7 | C13 |
| 1 | 50K | Resistor_SMD:R_0805_2012Metric | R9 |
| 1 | AO3400A | Package_TO_SOT_SMD:SOT-23 | Q5 |
| 1 | BOOT | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP2 |
| 1 | BUTTON | LedGateController:TS-1009B-04326 | SW1 |
| 1 | CHARGE_LED | LED_SMD:LED_0805_2012Metric | D5 |
| 1 | DW01 | Package_TO_SOT_SMD:SOT-23-6 | U3 |
| 1 | FS8205A | Package_SO:TSSOP-8_4.4x3mm_P0.65mm | Q1 |
| 1 | LED_DATA_3V3 | TestPoint:TestPoint_Pad_D1.0mm | TP5 |
| 1 | LED_DATA_5V | TestPoint:TestPoint_Pad_D1.0mm | TP6 |
| 1 | LED_OUT | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Horizontal | J3 |
| 1 | MT3608 | Package_TO_SOT_SMD:SOT-23-6 | U2 |
| 1 | NO_PROTECTION | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP1 |
| 1 | PI4ULS5V201 | Package_TO_SOT_SMD:SOT-23-6 | U5 |
| 1 | PWR_LED | LED_SMD:LED_0805_2012Metric | D2 |
| 1 | SS22 | Diode_SMD:D_SMA_Handsoldering | D1 |
| 1 | STM32F103C8Tx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | SWD | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J2 |
| 1 | TP4056 | SamacSys_Parts:SOIC127P600X175-9N | J5 |
| 1 | USB_B_Micro | SamacSys_Parts:U254051T4BHJ25S2S | J4 |
| 1 | XC6206P332MR | Package_TO_SOT_SMD:SOT-23 | U4 |
Similar boards
- 2 layers150 × 40 mm

- 2 layers80 × 50 mm

- 4 layers36.6 × 100 mm

Echometer
wzwqoo/Echometer
KiCad 10 project (v4.kicadpro, schematic + 4-layer PCB), fabrication outputs in fab/, BOM in v4.csv, and the parametric acoustic-horn generator ultrasonichornfreecad.py.
78 parts - 2 layers84 × 98 mm

Joule Chief
fishPointer/Joule-Thief
I teach myself new skills by designing projects that require to develop the skills I want in order to complete them.
93 parts25MIT - 4 layers322.5 × 183.5 mm

Dancing forest
sequoia-hope/dancing-forest-pcb
The PCB design for the Dancing Forest art project
239 parts1 - 4 layers45.1 × 45.1 mm

SuperPower uC KiCad
SuperPower/Artemis
All hardware designs and products you can find in this repository is licensed under CERN Open Hardware Licence Version 2 - Weakly Reciprocal
99 parts2 - 2 layers81 × 28.5 mm

- 2 layers62 × 6 mm

TableLight
jonny190/TableLight
A 3D-printable, battery-powered, USB-C rechargeable table lamp in the classic "Poldina" shape - honeycomb disc base, thin stem, down-firing cone shade with a white top - running WLED on an ESP32, with a capacitive touch…
72 partsMIT
Questions
How big is the LedGateController PCB?
It measures 80 × 25 mm and has 2 copper layers, 1.6 mm thick.
What parts does the LedGateController use?
73 parts, built around the MT3608, DW01, XC6206P332MR and AO3401A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the LedGateController KiCad files?
From the Knifa/ws28xx-led-driver repository on GitHub, at the commit this page was made from: the board is hardware/LedGateController.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the LedGateController design in my own project?
Its repository states no licence, so its author keeps all rights: ask Knifa before reusing the design.