4 layers133.1 × 148 mm
Dancing forest version 1
sequoia-hope/dancing-forest-pcb
The PCB design for the Dancing Forest art project
177 parts1
4 layers322.5 × 183.5 mm
Dancing forest
sequoia-hope/dancing-forest-pcb1The PCB design for the Dancing Forest art project
- Size
- 322.5 × 183.5 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 239
- Nets
- 205
- Pads
- 1,055
- Tracks, vias
- 2,550, 359
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 24 Aug 2023
- Updated
- 24 Aug 2023
Overview
Dancing forest is an open-source printed circuit board by sequoia-hope, from the sequoia-hope/dancing-forest-pcb repository on GitHub. It is a 4-layer board of 322.5 × 183.5 mm with 239 parts on 205 nets, routed with 2,550 tracks and 359 vias.
It is built around the ESP32-S3-MINI-1-N8, FT231XS-R and LIS3MDL, with the DW01, FS8205A and LSM6DS3 among its other parts. Its parts include 27 resistors, 26 capacitors, 16 connectors, 13 ICs and 5 switches. It belongs with the ESP32 boards of this library.
Main components
12
ESP32-S3-MINI-1-N8
SMD-104.5dBm -40℃~+85℃ 2.4GHz 20.5dBm 330mA 3V~3.6V 97mA Bluetooth5.0 ESP32-S3FN8 Chip On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD WiFi Modules ROHSEspressif SystemsWiFi Modules
FT231XS-R
SSOP-20-150mil-40℃~+85℃ 125uA 5V 8.4mA USB 2.0 USB to UART SSOP-20-150mil USB Converters ROHSFTDIUSB Converters
LIS3MDL
LGA-12(2x2)-40℃~+85℃ 1.9V~3.6V 16bit 1uA、40uA、270uA I2C、SPI ±1.6mT、±1.2mT、±8Gs、±4Gs ±1.6mT、±1.2mT、±8Gs、±4Gs LGA-12(2x2) 3D Magnetic Sensors ROHSSTMicroelectronics3D Magnetic Sensors
DW01
SOT-23-6-40℃~+85℃ 1 1.5V~8V 2.4V 4.3V 4uA Lithium Battery Not supported Overcharge protection、Over-discharge protection、Overcurrent Protection、Short-Circuit Protection Protection IC Support SOT-23-6 Battery Management ROHSGuangdong HottechBattery ManagementFS8205A
SOT-23-6-55℃~+150℃ 1.2V 1.5W 2 N-Channel 20V 31.5mΩ@2.5V 466pF 5.7nC@4.5V 58pF 65pF 6A SOT-23-6 MOSFETs ROHSTECH PUBLICMOSFETs
LSM6DS3
LGA-14(2.5x3)-40℃~+85℃ 1.71V~3.6V 8KB Accelerometer Gyroscope SPI、I2C X,Y,Z X,Y,Z ±16g ±2000dps LGA-14(2.5x3) Accelerometers ROHSSTMicroelectronicsAccelerometers
TP4056
ESOP-8-40℃~+85℃ 1 1A 35uA 4.2V 4V~6.5V Charging IC Lithium Battery Support Support 恒流充电、恒压充电、涓流充电、自动再充电、充电终止、可编程充电电流、软启动、欠压锁定 ESOP-8 Battery Management ROHSUMWBattery Management
WS2812B
5mm X 5mm Surface Mount RGB LED with Intelligent ControlWorldsemiUncategorised
SK6812SIDE-A
SMD-4P,4x1.6mm-40℃~+85℃ 0.6mA 1.6mm 120° 160mcd~320mcd 1kHz 2000V 240mcd~450mcd 2mm 3.7V~5.5V 460nm~470nm 4mm 520nm~535nm 620nm~625nm 697.5mcd~1162.5mcd 800Kbit/s Built-in power-on reset circuit Translucent Frosted Lens SMD-4P,4x1.6mm RGB LEDs(Built-in IC) ROHSOPSCO OptoelectronicsRGB LEDs(Built-In IC)
SK6812RGBW-BW
SMD5050-4PSMD5050-4P RGB LEDs(Built-in IC) ROHSOPSCO OptoelectronicsUncategorised
AO3400A
SOT-23-55℃~+150℃ 1 N-channel 1.45V 1.4W 30V 48mΩ@2.5V 5.7A 50pF 630pF 75pF 7nC@10V N-Channel SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETs
SM04B-SRSS-TB(LF)(SN)
SMD,P=1mm,卧贴-25℃~+85℃ 1 1A 1mm 1x4P 2.9mm 4 4.32mm 4P 50V 6mm Auxiliary Solder Pin Copper alloy PA SH Surface Mount, Right Angle Tin UL94V-0 White SMD,P=1mm,卧贴 Wire To Board Connector ROHSJSTWire To Board Connector
README
Readme.mdPCB design files for The Dancing Forest, an interactive dynamic social art space
Please see https://www.thedancingforest.art/ for more info.
Parts
239| Qty | Value | Footprint | References |
|---|---|---|---|
| 72 | WS2812B | LED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | RGBD1, RGBD2, RGBD10, RGBD11, RGBD12, RGBD13, RGBD14, RGBD15, RGBD16, RGBD17, RGBD18, RGBD19, RGBD20, RGBD21, RGBD22, RGBD23 +56 |
| 24 | SK6812-SIDE | led:SK6812SIDE | RGBSIDE1, RGBSIDE2, RGBSIDE10, RGBSIDE11, RGBSIDE12, RGBSIDE13, RGBSIDE14, RGBSIDE15, RGBSIDE16, RGBSIDE17, RGBSIDE18, RGBSIDE19, RGBSIDE20, RGBSIDE21, RGBSIDE22, RGBSIDE23 +8 |
| 16 | SK6812-RGBW | led:LED_SK6812_PLCC4_5.0x5.0mm_P3.2mm | RGBWD1, RGBWD2, RGBWD3, RGBWD4, RGBWD5, RGBWD6, RGBWD7, RGBWD8, RGBWD9, RGBWD10, RGBWD11, RGBWD12, RGBWD13, RGBWD14, RGBWD15, RGBWD16 |
| 13 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C1, C2, C6, C10, C13, C17, C18, C21, C22, C23, C24, C25, C26 |
| 11 | 10k 0.5% | Resistor_SMD:R_0805_2012Metric | R1, R4, R19, R20, R21, R22, R23, R24, R25, R26, R27 |
| 8 | MountingHole | led:MountingHole_3.2mm_Plastite_#4 | H1, H2, H3, H4, H5, H6, H7, H8 |
| 8 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1, JP2, JP3, JP4, JP6, JP7, JP8, JP9 |
| 6 | 5.1k | Resistor_SMD:R_0603_1608Metric | R2, R3, R10, R11, R14, R18 |
| 5 | 10u | Capacitor_SMD:C_0805_2012Metric | C3, C4, C5, C9, C16 |
| 4 | 0.1uF | Capacitor_SMD:C_0805_2012Metric | C7, C8, C14, C15 |
| 4 | Conn_01x01 | led:spring_F6-6-4-0.4Z | J7, J8, J19, J20 |
| 4 | SW_MEC_5G | led:SW_TS_1101_C_W | SW1, SW2, SW4, SW5 |
| 4 | TXS0101DCKR | Package_TO_SOT_SMD:SOT-363_SC-70-6 | U1, U2, U6, U11 |
| 3 | 1k | Resistor_SMD:R_0805_2012Metric | R6, R7, R9 |
| 3 | Conn_01x05 | led:5_pin | DIST1, DIST2, DIST3 |
| 2 | 100 | Resistor_SMD:R_0805_2012Metric | R5, R13 |
| 2 | 1u | Capacitor_SMD:C_0603_1608Metric | C12, C27 |
| 2 | 27 | Resistor_SMD:R_0603_1608Metric | R16, R17 |
| 2 | 470uF 16V | Capacitor_SMD:CP_Elec_6.3x7.7 | C19, C20 |
| 2 | AO3400A | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 2 | Conn_01x01 | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J2, J3 |
| 2 | Conn_01x02 | Connector_Molex:Molex_KK-254_AE-6410-02A_1x02_P2.54mm_Vertical | J9, J15 |
| 2 | Conn_01x04 | Connector_Molex:Molex_KK-254_AE-6410-04A_1x04_P2.54mm_Vertical | J6, J16 |
| 2 | Q_NPN_BEC | Package_TO_SOT_SMD:SOT-23-3 | Q5, Q6 |
| 2 | TestPoint | TestPoint:TestPoint_Keystone_5019_Minature | TP1, TP2 |
| 1 | 0.010 R | Resistor_SMD:R_0805_2012Metric | R15 |
| 1 | 0R | Resistor_SMD:R_0805_2012Metric | R12 |
| 1 | 1.2k | Resistor_SMD:R_0805_2012Metric | R8 |
| 1 | CONFIG SWITCH | Button_Switch_SMD:SW_DIP_SPSTx06_Slide_KingTek_DSHP06TS_W7.62mm_P1.27mm | SW3 |
| 1 | Conn_01x03 | Connector_Molex:Molex_KK-254_AE-6410-03A_1x03_P2.54mm_Vertical | J5 |
| 1 | Conn_01x04 | Connector_PinHeader_2.00mm:PinHeader_1x04_P2.00mm_Vertical | J10 |
| 1 | DW01 | Package_TO_SOT_SMD:SOT-23-6_Handsoldering | U7 |
| 1 | ESP32-S3-MINI-1-N8 | esp:ESP32-S3-MINI-1-breakout | U13 |
| 1 | FS8205A | Package_TO_SOT_SMD:SOT-23-6_Handsoldering | U9 |
| 1 | FT231XS | Package_SO:SSOP-20_3.9x8.7mm_P0.635mm | U4 |
| 1 | GREEN | LED_SMD:LED_0805_2012Metric | D2 |
| 1 | INA199xxDCK | Package_TO_SOT_SMD:SOT-363_SC-70-6 | U12 |
| 1 | LD1086DT33TR | Package_TO_SOT_SMD:TO-252-2 | U3 |
| 1 | LIS3MDL | Package_LGA:LGA-12_2x2mm_P0.5mm | U10 |
| 1 | LOGO | led:artwork_smaller | G*** |
| 1 | LSM6DS3 | Package_LGA:LGA-14_3x2.5mm_P0.5mm_LayoutBorder3x4y | U5 |
| 1 | Lower Connector | Connector_PinHeader_2.00mm:PinHeader_2x06_P2.00mm_Vertical | J12 |
| 1 | MountingHole_3.2mm_Plastite_#4 | H9 | H9 |
| 1 | MountingHole_3.2mm_Plastite_#4 | H10 | H10 |
| 1 | MountingHole_3.2mm_Plastite_#4 | H11 | H11 |
| 1 | MountingHole_3.2mm_Plastite_#4 | H12 | H12 |
| 1 | RED | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | SM04B-SRSS-TB(LF)(SN) | Connector_JST:JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J4 |
| 1 | SolderJumper_3_Open | Jumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | JP5 |
| 1 | TP4056 | Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm | U8 |
| 1 | USB_C_Receptacle_USB2.0 | usb:918-468K2029E50000 | J1 |
| 1 | Upper Connector | Connector_PinSocket_2.00mm:PinSocket_2x06_P2.00mm_Vertical | J11 |
| 1 | VAL** | mousebite2 | mousebite2 |
| 1 | VAL** | mousebite3 | mousebite3 |
| 1 | VAL** | mousebite5 | mousebite5 |
| 1 | VAL** | mousebite6 | mousebite6 |
| 1 | VAL** | mousebite7 | mousebite7 |
| 1 | VAL** | mousebite1 | mousebite1 |
| 1 | VAL** | mousebite4 | mousebite4 |
More from sequoia-hope/dancing-forest-pcb
2- 4 layers
Dancing forest pcb
sequoia-hope/dancing-forest-pcb
The PCB design for the Dancing Forest art project
91 parts1
Similar boards
- 2 layers
- 2 layers84 × 98 mm
Joule Chief
fishPointer/Joule-Thief
I teach myself new skills by designing projects that require to develop the skills I want in order to complete them.
93 parts25MIT - 2 layers32 × 32 mm
- 2 layers159 × 140.1 mm
Phazor
skrmsh/skirmish-hardware
Skirmish Hardware © 2022-2023 by Ole Lange is licensed under CC BY-NC-SA 4.0. To view a copy of this license, visit http://creativecommons.org/licenses/by-nc-sa/4.0/
123 parts10 - 2 layers80 × 25 mm
- 2 layers80 × 50 mm
- 4 layers
- 2 layers
Rgb ring
emmanuelprakash177-gi/RPI-AI-ASSISTANT
I want to create an ai assistant . Now a days am very much thinking about it . Then I got an idea to create a ai assistant fully offline. Running fully offline model
128 parts
Questions
How big is the Dancing forest PCB?
It measures 322.5 × 183.5 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Dancing forest use?
239 parts, built around the ESP32-S3-MINI-1-N8, FT231XS-R, LIS3MDL and DW01. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Dancing forest KiCad files?
From the sequoia-hope/dancing-forest-pcb repository on GitHub, at the commit this page was made from: the board is dancing_forest.kicad_pcb and its schematic dancing_forest.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Dancing forest design in my own project?
Its repository states no licence, so its author keeps all rights: ask sequoia-hope before reusing the design.