
GIRA ESP8266 Jalousiesteuerung
CatoLynx/GIRA-Blinds-ESP8266-HW
Hardware for ESP8266 adapter board for GIRA blinds controller

VFD and LED badge fitting the 36C3 design
36C3 Badge Hardware is an open-source printed circuit board by CatoLynx, from the CatoLynx/36C3-Badge repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 160 × 100 mm with 159 parts on 137 nets, routed with 1,267 tracks and 179 vias.
It is built around the ATMEGA328P-AU, 74LVC2G17GW and CH330N, with the DW01, MCP73871-2CCI/ML and BC817 among its other parts. Its parts include 58 diodes, 42 resistors, 28 capacitors, 10 transistors and 6 ICs. It belongs with the lEDs and displays boards and the AVR (ATmega, ATtiny) boards of this library.



| Qty | Value | Footprint | References |
|---|---|---|---|
| 15 | Hope2 | custom:LED_SideFacing_0802 | D34, D35, D36, D37, D38, D39, D40, D41, D42, D43, D44, D45, D46, D47, D48 |
| 12 | 1k | Resistors_SMD:R_0603 | R3, R10, R11, R12, R21, R22, R31, R32, R37, R38, R40, R41 |
| 11 | 100n | Capacitors_SMD:C_0603 | C3, C4, C5, C9, C18, C19, C20, C21, C22, C24, C25 |
| 11 | Destruction2 | custom:LED_SideFacing_0802 | D14, D15, D16, D17, D18, D19, D20, D21, D22, D23, D24 |
| 8 | 470n/50V | Capacitors_SMD:C_0805 | C10, C11, C12, C13, C14, C15, C16, C17 |
| 7 | 470R | Resistors_SMD:R_Array_Concave_4x0603 | R14, R15, R17, R18, R19, R23, R24 |
| 7 | BC817 | TO_SOT_Packages_SMD:SOT-23 | Q2, Q3, Q5, Q6, Q7, Q9, Q10 |
| 7 | Destruction1 | custom:LED_SideFacing_0802 | D25, D26, D27, D28, D29, D30, D31 |
| 7 | Destruction3 | custom:LED_SideFacing_0802 | D7, D8, D9, D10, D11, D12, D13 |
| 6 | 2.2k | Resistors_SMD:R_Array_Concave_4x0603 | R26, R27, R28, R29, R33, R34 |
| 6 | Hope1 | custom:LED_SideFacing_0802 | D50, D51, D52, D53, D54, D55 |
| 5 | 4.7k | Resistors_SMD:R_0603 | R16, R20, R25, R30, R36 |
| 3 | 4.7µ/25V | Capacitors_SMD:C_0805 | C2, C7, C8 |
| 3 | BAT54S | TO_SOT_Packages_SMD:SOT-23 | D32, D33, D49 |
| 2 | 10k | Resistors_SMD:R_0603 | R7, R43 |
| 2 | 18p | Capacitors_SMD:C_0603 | C26, C28 |
| 2 | 1N4148 | Diodes_SMD:D_0603 | D57, D58 |
| 2 | BAT46W | Diodes_SMD:D_SOD-123 | D6, D56 |
| 2 | BC807 | TO_SOT_Packages_SMD:SOT-23 | Q4, Q8 |
| 1 | 1.82k | Resistors_SMD:R_0603 | R9 |
| 1 | 100R | Resistors_SMD:R_0603 | R1 |
| 1 | 100k | Resistors_SMD:R_0603 | R42 |
| 1 | 10µ/25V | Capacitors_SMD:C_0805 | C1 |
| 1 | 120k | Resistors_SMD:R_0603 | R5 |
| 1 | 16MHz | Crystals:Crystal_HC49-SD_SMD | Y1 |
| 1 | 18k | Resistors_SMD:R_0603 | R6 |
| 1 | 1S LiIon | custom:1S_18650_Holder_with_Spacers | BT1 |
| 1 | 1µ | Capacitors_SMD:C_0805 | C27 |
| 1 | 22µ/25V | Capacitors_SMD:C_0805 | C6 |
| 1 | 2k | Resistors_SMD:R_0603 | R2 |
| 1 | 330k | Resistors_SMD:R_0603 | R4 |
| 1 | 4.7µ/1.25A | custom:Inductor_3x3mm | L1 |
| 1 | 470R | Resistors_SMD:R_0603 | R35 |
| 1 | 5.6k | Resistors_SMD:R_0603 | R8 |
| 1 | 74LVC2G17 | custom:SOT-457 | U5 |
| 1 | 8.2k | Resistors_SMD:R_0603 | R39 |
| 1 | 82p | Capacitors_SMD:C_0603 | C23 |
| 1 | ATMEGA328P-AU | Housings_QFP:TQFP-32_7x7mm_Pitch0.8mm | U6 |
| 1 | Button1 | Buttons_Switches_SMD:SW_SPST_SKQG | SW2 |
| 1 | Button2 | Buttons_Switches_SMD:SW_SPST_SKQG | SW3 |
| 1 | CH330N | Housings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mm | U4 |
| 1 | DW01 | TO_SOT_Packages_SMD:SOT-23-6 | U2 |
| 1 | FS8205A | Housings_SSOP:TSSOP-8_4.4x3mm_Pitch0.65mm | Q1 |
| 1 | HCS-12SS59T | custom:VFD_HCS-12SS59T_noSilk | VFD1 |
| 1 | ISP | Pin_Headers:Pin_Header_Straight_SMT_02x03 | J2 |
| 1 | ISP | custom:Jumper_SolderBridge | JP1 |
| 1 | MCP73871-2CCI | Housings_DFN_QFN:QFN-20-1EP_4x4mm_Pitch0.5mm | U3 |
| 1 | MIC2288 | TO_SOT_Packages_SMD:SOT-23-5 | U1 |
| 1 | MicroUSB | custom:MicroUSB_Amphenol_10118192 | J1 |
| 1 | Reset | Buttons_Switches_SMD:SW_SPST_SKQG | SW1 |
| 1 | Rx | LEDs:LED_0603 | D4 |
| 1 | SK110 | Diodes_SMD:D_SMA_Standard | D2 |
| 1 | Standby | Buttons_Switches_SMD:SW_SPST_SKQG | SW4 |
| 1 | Tx | LEDs:LED_0603 | D5 |
| 1 | USB | LEDs:LED_0603 | D3 |
| 1 | USBLC6-2SC6 | TO_SOT_Packages_SMD:SOT-23-6 | D1 |
| 1 | resource_exhaustion_mask | custom:resource_exhaustion_mask | G*** |
The 156 most common of 159 parts.

CatoLynx/GIRA-Blinds-ESP8266-HW
Hardware for ESP8266 adapter board for GIRA blinds controller

mariomp14/mixing_table
This desing has some errors! If you want do the the project you have to change some things. During the explain the errors will be pointed out and explained.

CatoLynx/Kettcar_Control_HW
Central controller for my hoverboard-powered Kettcar



CatoLynx/16_Segment_Display_HW_Controller
ESP32-based controller board for large 16-segmend LED display

7west/PicoTop
A very basic computer & OS based on the RP2350 microcontroller

It measures 160 × 100 mm and has 2 copper layers, 1.6 mm thick.
159 parts, built around the ATMEGA328P-AU, 74LVC2G17GW, CH330N and DW01. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the CatoLynx/36C3-Badge repository on GitHub, at the commit this page was made from: the board is 36C3_Badge_Hardware/36C3_Badge_Hardware.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).