

Kettcar Control HW
Central controller for my hoverboard-powered Kettcar
- Size
- 150 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 121
- Nets
- 150
- Pads
- 527
- Tracks, vias
- 1,317, 119
- Pours
- 10
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 9 May 2023
- Updated
- 5 Jun 2023
Overview
Kettcar Control HW is an open-source printed circuit board by CatoLynx, from the CatoLynx/Kettcar_Control_HW repository on GitHub. It is a 2-layer board of 150 × 100 mm with 121 parts on 150 nets, routed with 1,317 tracks and 119 vias.
It is built around the 74HC595, TBD62083APG and 74HC165D, with the CNY17-3, NLAST4599DT and AO4407A among its other parts. Its parts include 41 resistors, 21 connectors, 14 ICs, 12 transistors and 11 capacitors.
Main components
1274HC595
SOP-16-40℃~+85℃ 1 100ns@5V,50pF 10MHz 2V~6V 74HC 8 Serial-to-Serial or Parallel Tri-State SOP-16 Shift Registers ROHSGRShift RegistersTBD62083APG
DIP-18-40℃~+85℃ 0.1mA 1uA 1uA 2V 30V 500mA 50V 8 DIP-18 Darlington Transistor Arrays ROHSToshibaDarlington Transistor Arrays74HC165D
SO-16-40℃~+125℃ 1 28ns@6V,50pF 2V~6V 35MHz 500mW 74HC 8 Parallel or Serial to Serial SOIC-16 Shift Registers ROHSNexperiaShift RegistersCNY17-3
DIP-6-55℃~+100℃ 1 1.45V 100% 150mA 200% 250mW 300mV@2.5mA,10mA 5kV 5us 5us@2mA,100Ω 60mA 6V 70V DC Phototransistor DIP-6 Transistor, Photovoltaic Output Optoisolators ROHSLite-OnTransistor, Photovoltaic Output OptoisolatorsNLAST4599DT
TSOP-6-1.5mm-55℃~+125℃ 1 200MHz 25ns 2:1 2V~5.5V 30Ω 9ns TSOP-6-1.5mm Analog Switches, Multiplexers ROHSonsemiAnalog Switches, MultiplexersAO4407A
SOP-8-55℃~+150℃ 1 P-Channel 1.8V 14A 2.05nF 20nC@4.5V、40nC@10V 3.1W 300pF 30V 330pF 9.5mΩ@10V、14.7mΩ@4.5V SOP-8 MOSFETs ROHSUMWMOSFETsBSS138BKS
SOT-363-50℃~+150℃ 1.5Ω@10V、1.6Ω@4.5V 1V 2 N-Channel 2.2pF 25pF 410mA 417mW 60V 650pC@4.5V 9.7pF N-Channel SOT-363 MOSFETs ROHSElecSuperMOSFETsMMBT7002K
SOT-23-55℃~+150℃ 1 N-channel 2.5V 25pF 300mA 350mW 4Ω@4.5V 50pF 5pF 60V N-Channel ±20V SOT-23 MOSFETs ROHSCBIMOSFETsIXTP96P085T
TO-220TO-220 MOSFETs ROHSLittelfuse/IXYSMOSFETsMBRB20100CT
TO-263-55℃~+150℃ 1 Pair Common Cathode 100V 150A 150uA@100V 20A 880mV@10A TO-263 Schottky Diodes ROHSbaochengSchottky DiodesSK110
DO-214AC(SMA)Schottky DiodesJUXINGWS2812
SMD5050-4P1.57mm 1000mcd 110mcd 120us 2kHz 3.7V~5.3V 300ns 320mcd 451nm 523nm 5mm 5mm 623nm 800Kbit/s Built-in power-on reset circuit、Built-in power-on reset circuit Top-mount SMD5050-4P RGB LEDs(Built-in IC) ROHSWorldsemiRGB LEDs(Built-In IC)
Parts
121| Qty | Value | Footprint | References |
|---|---|---|---|
| 18 | 4.7k | Resistor_SMD:R_0603_1608Metric | R1, R2, R3, R4, R5, R6, R11, R12, R13, R14, R15, R16, R20, R22, R23, R24 +2 |
| 12 | 10k | Resistor_SMD:R_0603_1608Metric | R30, R31, R32, R33, R34, R35, R36, R37, R38, R39, R40, R41 |
| 6 | AO4407A | custom:SO8_FET | Q1, Q2, Q3, Q4, Q5, Q6 |
| 5 | 100n | Capacitor_SMD:C_0603_1608Metric | C5, C6, C7, C8, C9 |
| 4 | 100k | Resistor_SMD:R_0603_1608Metric | R17, R18, R21, R25 |
| 4 | 10k | Resistor_SMD:R_Array_Concave_4x0603 | RN1, RN2, RN3, RN4 |
| 4 | 1k | Resistor_SMD:R_0603_1608Metric | R9, R10, R26, R28 |
| 4 | 1µ | Capacitor_SMD:C_0805_2012Metric | C1, C2, C10, C11 |
| 3 | 74HC595 | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U3, U8, U12 |
| 3 | BSS138BKS | Package_TO_SOT_SMD:SOT-363_SC-70-6 | Q10, Q11, Q12 |
| 3 | TBD62083A | Package_SO:SSOP-18_4.4x6.5mm_P0.65mm | U2, U7, U11 |
| 2 | 1M | Resistor_SMD:R_0603_1608Metric | R27, R29 |
| 2 | 4.7µ | Capacitor_SMD:C_0805_2012Metric | C3, C4 |
| 2 | 74HC165 | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U5, U6 |
| 2 | Battery Out | custom:Conn_XT60PB | J6, J7 |
| 2 | CNY17-3 | custom:Optocoupler_SMD_6pin | U9, U10 |
| 2 | MMBT7002K | Package_TO_SOT_SMD:SOT-23-3 | Q7, Q9 |
| 2 | NLAST4599 | Package_TO_SOT_SMD:SOT-363_SC-70-6 | U13, U14 |
| 1 | 180R | Resistor_SMD:R_0603_1608Metric | R19 |
| 1 | Arduino Nano | custom:Arduino_Nano | U4 |
| 1 | Battery 1 | custom:Conn_XT90PB | J1 |
| 1 | Battery 2 | custom:Conn_XT90PB | J4 |
| 1 | Brake | custom:Conn_DEGSON_15EDGRC-3.5-03P | J17 |
| 1 | DC/DC 24V=>5V | custom:Conn_DEGSON_2EDGRC-5.0-04P | J3 |
| 1 | DC/DC 48V=>24V | custom:Conn_DEGSON_2EDGRC-5.0-04P | J2 |
| 1 | Enable Front | custom:Conn_DEGSON_15EDGRC-3.5-02P | J15 |
| 1 | Enable Rear | custom:Conn_DEGSON_15EDGRC-3.5-02P | J18 |
| 1 | Headlights | custom:Conn_DEGSON_15EDGRC-3.5-06P | J5 |
| 1 | Horn | custom:Conn_DEGSON_2EDGRC-5.0-02P | J12 |
| 1 | IXTP96P085T | Package_TO_SOT_THT:TO-220-3_Vertical | Q8 |
| 1 | Indicators | custom:Conn_DEGSON_15EDGRC-3.5-04P | J8 |
| 1 | Inputs 1 | custom:Conn_DEGSON_15EDGRC-3.5-10P | J9 |
| 1 | Inputs 2 | custom:Conn_DEGSON_15EDGRC-3.5-10P | J13 |
| 1 | I²C | custom:Conn_DEGSON_15EDGRC-3.5-04P | J11 |
| 1 | LD-BZEG-1203 | Buzzer_Beeper:Buzzer_12x9.5RM7.6 | LS1 |
| 1 | LOGO | custom:Designed_by_Cato | G*** |
| 1 | LOGO | custom:Original_Catcar | G*** |
| 1 | MBRB20100CT | Package_TO_SOT_SMD:TO-263-2 | D2 |
| 1 | NCP114BSN330T1G | Package_TO_SOT_SMD:TSOT-23-5 | U1 |
| 1 | Outputs 1 | custom:Conn_DEGSON_15EDGRC-3.5-10P | J14 |
| 1 | Outputs 2 | custom:Conn_DEGSON_15EDGRC-3.5-10P | J19 |
| 1 | Rx F HW | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP2 |
| 1 | Rx F SW | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP1 |
| 1 | Rx R HW | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP4 |
| 1 | Rx R SW | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP3 |
| 1 | SK110 | Diode_SMD:D_SMB | D1 |
| 1 | Throttle | custom:Conn_DEGSON_15EDGRC-3.5-03P | J16 |
| 1 | Tx F HW | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP6 |
| 1 | Tx F SW | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP5 |
| 1 | Tx R HW | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP8 |
| 1 | Tx R SW | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP7 |
| 1 | UART Front | custom:Conn_DEGSON_15EDGRC-3.5-03P | J20 |
| 1 | UART Rear | custom:Conn_DEGSON_15EDGRC-3.5-03P | J21 |
| 1 | WS2812 | custom:Conn_DEGSON_15EDGRC-3.5-03P | J10 |
The 116 most common of 121 parts.
Similar boards
- 2 layers160 × 100 mm

- 2 layers46 × 46 mm

GIRA ESP8266 Jalousiesteuerung
CatoLynx/GIRA-Blinds-ESP8266-HW
Hardware for ESP8266 adapter board for GIRA blinds controller
31 parts1 - 4 layers170 × 170 mm

CM5IO
sanctuary-systems-com/rpi-cm5io-mini-itx
A mini ITX board with PCIe x16 based on the Raspberry Pi Comput Module 5 IO board
75 parts29CERN-OHL-P-2.0 - 4 layers75 × 67.7 mm

Pcie water loop controller
agmlego/water-cooling-controller
The intent of this project is to monitor and control an external chiller system for a PC water-cooling loop with a liquid-liquid heat exchanger to separate the internal and external loops.
58 parts2 - 2 layers113 × 49 mm

- 4 layers80 × 80.2 mm

5XL REV0
DangerousPrototypes/BusPirate5-hardware
Bus Pirate Hardware and accessories for v5 and higher
227 parts125MIT - 2 layers181.1 × 139.9 mm

Campervan management
akladnig/CamperVan
- CamperVan Design and Arduino Circuit Design - Campervan Design Overview - Dashboard App - Electrical System - Sensors - Circuit Design - Battery and voltage monitoring - Voltage Divider Design - Low Pass Filter - TODO
116 parts - 2 layers42 × 59.5 mm

ESP32 adon
Stan-debakker/grap-6TWEA
Daarnaast moest ik ervoor zorgen dat de nieuwe sensoren correct werken. Ik ben gestart met experimenteren via Arduino IDE, zie "codearduinoIDE".
37 parts
Questions
How big is the Kettcar Control HW PCB?
It measures 150 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Kettcar Control HW use?
121 parts, built around the 74HC595, TBD62083APG, 74HC165D and CNY17-3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Kettcar Control HW KiCad files?
From the CatoLynx/Kettcar_Control_HW repository on GitHub, at the commit this page was made from: the board is Kettcar_Control_HW.kicad_pcb and its schematic Kettcar_Control_HW.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Kettcar Control HW design in my own project?
Its repository states no licence, so its author keeps all rights: ask CatoLynx before reusing the design.