Skip to the content
123

MMBT7002K

CBIExtended

-55℃~+150℃ 1 N-channel 2.5V 25pF 300mA 350mW 4Ω@4.5V 50pF 5pF 60V N-Channel ±20V SOT-23 MOSFETs ROHS

Part id
cbi/MMBT7002K
Category
MOSFETs
Package
SOT-23
Pins
3
In stock
1,581 at JLCPCB (C2879714)
Used on
7 open-source boards

Overview

The MMBT7002K is a MOSFET made by CBI in a SOT-23 package with 3 pins. -55℃~+150℃ 1 N-channel 2.5V 25pF 300mA 350mW 4Ω@4.5V 50pF 5pF 60V N-Channel ±20V SOT-23 MOSFETs ROHS.

PCBKit's library has its KiCad symbol (Pinmap_Generic:Q_NMOS_1G_2S_3D, from PCBKit's generic symbols) and its footprint (Package_TO_SOT_SMD:SOT-23, from KiCad's library), ready for a KiCad board. 1,581 are in stock at JLCPCB (part C2879714). 7 open-source boards in 4 repositories on GitHub use it.

Symbol

Pinmap_Generic:Q_NMOS_1G_2S_3DFrom PCBKit's generic symbols

Footprint

123
Package_TO_SOT_SMD:SOT-23From KiCad's library

Pinout

3
The pins of the MMBT7002K
PinNameType
1GInput
2SPassive
3DPassive

Open-source boards using it

7
  • 4 layers170 × 170 mmCM5IO, the printed circuit board in 3D

    CM5IO

    sanctuary-systems-com/rpi-cm5io-mini-itx

    A mini ITX board with PCIe x16 based on the Raspberry Pi Comput Module 5 IO board

    75 parts29CERN-OHL-P-2.0
  • 2 layers150 × 100 mmKettcar Control HW, the printed circuit board in 3D

    Kettcar Control HW

    CatoLynx/Kettcar_Control_HW

    Central controller for my hoverboard-powered Kettcar

    121 parts
  • 4 layers80 × 80.2 mm5XL REV0, the printed circuit board in 3D

    5XL REV0

    DangerousPrototypes/BusPirate5-hardware

    Bus Pirate Hardware and accessories for v5 and higher

    227 parts125MIT
  • 4 layers60.5 × 60 mm6-REV2b, the printed circuit board in 3D

    6-REV2b

    DangerousPrototypes/BusPirate5-hardware

    Bus Pirate Hardware and accessories for v5 and higher

    227 parts125MIT
  • 4 layers60 × 60 mm7-REV1-freeze, the printed circuit board in 3D

    7-REV1-freeze

    DangerousPrototypes/BusPirate5-hardware

    Bus Pirate Hardware and accessories for v5 and higher

    260 parts125MIT
  • 2 layers42 × 59.5 mmESP32 adon, the printed circuit board in 3D

    ESP32 adon

    Stan-debakker/grap-6TWEA

    Daarnaast moest ik ervoor zorgen dat de nieuwe sensoren correct werken. Ik ben gestart met experimenteren via Arduino IDE, zie "codearduinoIDE".

    37 parts
  • 2 layers42.6 × 63.1 mmESP32 adon V2, the printed circuit board in 3D

    ESP32 adon V2

    Stan-debakker/grap-6TWEA

    Daarnaast moest ik ervoor zorgen dat de nieuwe sensoren correct werken. Ik ben gestart met experimenteren via Arduino IDE, zie "codearduinoIDE".

    38 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the MMBT7002K?

Yes. The symbol is Pinmap_Generic:Q_NMOS_1G_2S_3D and the footprint Package_TO_SOT_SMD:SOT-23, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the MMBT7002K?

SOT-23, with 3 pins. Its footprint is drawn on this page.

Where is the MMBT7002K datasheet?

CBI publishes it: the Datasheet link on this page opens it.

Where can I order the MMBT7002K?

JLCPCB lists it as part C2879714, with 1,581 in stock; the sellers' links on this page open their listings.

What can replace the MMBT7002K?

Parts like it in the library: the 2N7002K by hongjiacheng, the 2N7002K by Diodes Incorporated, the BSS138P by Nexperia and the BSS138K by ElecSuper. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the MMBT7002K?

7 boards in 4 repositories on GitHub; the most starred are listed on this page, with their KiCad files.