

Bobuino
atmega 1284 arduino compatible
- Size
- 87.5 × 95.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 147
- Nets
- 123
- Pads
- 528
- Tracks, vias
- 1,630, 125
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 8 Sep 2017
- Updated
- 16 Feb 2018
Overview
Bobuino is an open-source printed circuit board by llegoff, from the llegoff/bobuino repository on GitHub. It is a 2-layer board of 87.5 × 95.5 mm with 147 parts on 123 nets, routed with 1,630 tracks and 125 vias.
It is built around the ATMEGA1284-AU, CH340G and AP1117DG, with the DW01, MCP73831 and MIC5225YM5 among its other parts. Its parts include 36 resistors, 23 capacitors, 17 diodes, 16 connectors and 11 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
8ATMEGA1284-AU
TQFP-44(10x10)-40℃~+85℃ 1.8V~5.5V 10bit 128KB 16KB 20MHz 32 4KB 8 Bit AVR Built-in FLASH TQFP-44(10x10) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)CH340G
SOP-16-40℃~+85℃ 2Mbps 3.3V、5V USB 2.0 USB to UART SOP-16 USB Converters ROHSWCH (Nanjing Qinheng Microelectronics)USB ConvertersAP1117DG
SOT-223-40℃~+125℃@(Tj) 1 1.4V@(1A) 18V 1A 70dB@(180Hz) Adjustable、Fixed Over Current Protection、Thermal shutdown Positive SOT-223-4 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSDiodes IncorporatedVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsDW01
SOT-23-6-40℃~+85℃ 1 1.5V~8V 2.4V 4.3V 4uA Lithium Battery Not supported Overcharge protection、Over-discharge protection、Overcurrent Protection、Short-Circuit Protection Protection IC Support SOT-23-6 Battery Management ROHSGuangdong HottechBattery ManagementMCP73831
UncategorisedMicrochip TechnologyMIC5225YM5
SOT-23-5-40℃~+125℃@(Tj) 1 1.24V~14V 150mA 16V 29uA 310mV@(150mA) Adjustable Over Current Protection、Reverse connection protection、Enable、Thermal Shutdown Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMicrochip TechnologyVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsBSS138
SOT-23-55℃~+150℃ 1 N-channel 1.1Ω@10V、1.2Ω@4.5V 1.2V 1.7nC@10V 17.5pF 340mA 350mW 50V 6.5pF N-Channel SOT-23 MOSFETs ROHShongjiachengMOSFETsCR2032
-- Unclassified goods ROHSMaxellUncategorised
README
v1backup/README.mdbobuino
atmega 1284 arduino compatible
rev1 (/v1backup)
- U5 vcc and gnd are inverted !!!
- D1 & D2 light when inactive
- 1n4148 is missing between vcc and rst
rev2
- correct connection for U5, D1, D2 and D5
Parts
147| Qty | Value | Footprint | References |
|---|---|---|---|
| 18 | 1k | Resistors_SMD:R_0805 | R1, R2, R3, R4, R5, R7, R10, R30, R31, R32, R33, R34, R35, R36, R51, R54 +2 |
| 9 | 10k | Resistors_SMD:R_0805 | R6, R11, R12, R13, R14, R16, R17, R60, R70 |
| 6 | 100n | Capacitors_SMD:C_0805 | C5, C6, C7, C12, C13, C31 |
| 4 | 10u | Capacitors_Tantalum_SMD:TantalC_SizeA_EIA-3216_Reflow | C8, C10, C14, C15 |
| 4 | 1N5819 | Diodes_SMD:Diode-SMA_Standard | D4, D20, D21, D30 |
| 4 | 22p | Capacitors_SMD:C_0805 | C1, C2, C3, C4 |
| 4 | LED | LEDs:LED-0805 | D31, D53, D54, D80 |
| 4 | R | Resistors_Universal:Resistor_SMD+THTuniversal_0805to1206_RM10_HandSoldering | R80, R81, R82, R83 |
| 3 | BSS138 | Housings_SOT-23_SOT-143_TSOT-6:SOT-23 | Q1, Q60, Q70 |
| 3 | CONN_01X03 | Pin_Headers:Pin_Header_Straight_1x03 | P5, P60, P70 |
| 3 | LED | LEDs:LED-5MM | D81, D82, D83 |
| 3 | SW_PUSH | Buttons_Switches_SMD:SW_SPST_PTS645 | Reset1, SW50, SW80 |
| 2 | 100u | Capacitors_SMD:c_elec_6.3x5.7 | C21, C33 |
| 2 | 47u | Capacitors_SMD:c_elec_5x5.7 | C20, C32 |
| 2 | 47u | Capacitors_Tantalum_SMD:TantalC_SizeB_EIA-3528_Reflow | C9, C11 |
| 2 | 47uH | Choke_SMD:Choke_SMD_Wuerth-WE-PD2-Typ-MS | L20, L30 |
| 2 | 68 | Resistors_SMD:R_0805 | R52, R53 |
| 2 | AP1117 | SMD_Packages:SOT-223 | U3, U4 |
| 2 | BL8530 | Housings_SOT-23_SOT-143_TSOT-6:SOT-23 | U20, U30 |
| 2 | CONN_01X03 | Connect:bornier3 | P61, P71 |
| 2 | CONN_01X04 | Socket_Strips:Socket_Strip_Straight_1x04 | P20, P30 |
| 2 | CONN_01X05 | Pin_Headers:Pin_Header_Straight_1x05 | P50, P51 |
| 2 | CP_Small | Capacitors_SMD:C_1206 | C50, C51 |
| 2 | ENCODEUR_rotatif | _LaurentPerso:ENCODEUR_rotatif | S1, S40 |
| 2 | USB-MINI-B | Connect:USB_Mini-B | CON1, CON50 |
| 2 | zener3.3 | Diodes_ThroughHole:Diode_DO-41_SOD81_Vertical_KathodeUp | D51, D52 |
| 1 | 0 | Resistors_SMD:R_0805 | R15 |
| 1 | 10 1/2W | Resistors_ThroughHole:Resistor_Horizontal_RM15mm | R20 |
| 1 | 12Mhz | Crystals:Crystal_HC49-U_Vertical | X2 |
| 1 | 16Mhz | Crystals:Crystal_HC49-U_Vertical | X1 |
| 1 | 1N4001 | Diodes_SMD:Diode-SMA_Standard | D50 |
| 1 | 2-3 NIMH | Connect:PINHEAD1-2 | BT20 |
| 1 | 2.2k | Resistors_SMD:R_0805 | R50 |
| 1 | 4.7u | Capacitors_Tantalum_SMD:TantalC_SizeA_EIA-3216_Reflow | C30 |
| 1 | 4050 | SMD_Packages:SO-16-N | U5 |
| 1 | ARDUINO_SHIELD_R3 | _LaurentPerso:ARDUINO_SHIELD_R3 | SHIELD1 |
| 1 | ATMEGA1284-A | Housings_QFP:TQFP-44_10x10mm_Pitch0.8mm | U1 |
| 1 | ATTINY85-S | SMD_Packages:SOIC-8-N | U50 |
| 1 | CH340G | SMD_Packages:SO-16-N | U2 |
| 1 | CONN_01X04 | Pin_Headers:Pin_Header_Straight_1x04 | P40 |
| 1 | CONN_02X03 | Pin_Headers:Pin_Header_Straight_2x03 | P2 |
| 1 | CONN_02X04 | Pin_Headers:Pin_Header_Straight_2x04 | P3 |
| 1 | CR2032 | Connect:PINHEAD1-2 | BT80 |
| 1 | DW01 | Housings_SOT-23_SOT-143_TSOT-6:SOT-23-6 | U33 |
| 1 | FUSE | Fuse_Holders_and_Fuses:Fuse_SMD1206_Reflow | F1 |
| 1 | HK4100F | _LaurentPerso:HK4100F | K70 |
| 1 | L | LEDs:LED-0805 | D3 |
| 1 | LCD5110 | _LaurentPerso:LCD5110_ali | P1 |
| 1 | LiPo | Connect:PINHEAD1-2 | BT30 |
| 1 | MCP73831 | Housings_SOT-23_SOT-143_TSOT-6:SOT-23-5 | U31 |
| 1 | MIC5225 | Housings_SOT-23_SOT-143_TSOT-6:SOT-23-5 | U51 |
| 1 | ML8205A | Housings_SSOP:TSSOP-8_4.4x3mm_Pitch0.65mm | Q30 |
| 1 | RX | LEDs:LED-0805 | D1 |
| 1 | SRD-XXVDC | _LaurentPerso:SRD-XXVDC | K60 |
| 1 | SW_PUSH | Buttons_Switches_ThroughHole:SW_PUSH_SMALL | SW81 |
| 1 | TX | LEDs:LED-0805 | D2 |
| 1 | power | Socket_Strips:Socket_Strip_Straight_1x04 | P4 |
| 1 | uSD_CARD | _LaurentPerso:MicroSD_alliexpress | ??1 |
The 125 most common of 147 parts.
More from llegoff/bobuino
1- 2 layers68.5 × 53.2 mm

Similar boards
- 2 layers335 × 250 mm

- 2 layers39.9 × 43.3 mm

- 2 layers73.9 × 56 mm

Raspberrypi gpio audio
pasdesignal-zz/rPI_audio_board
a rPi daughter board for audio io and midi
117 parts - 2 layers22.9 × 39.4 mm

Adafruit adafruit bluefruit ez key pcb adafruit bluefruit ez key
oomlout/oomlout_oomp_project_bot_v_2
26 parts - 4 layers66 × 90 mm

- 2 layers44.5 × 58.4 mm

- 2 layers114.3 × 67.3 mm

Backdash
PhoenixRacing/Electrical1920
Firmware, software, and component design of sensing and computer systems for the 2019-2020 season
75 parts - 2 layers100 × 50 mm

Keyboard Encoder Helper
acwright/6502-COB
6502-COB 8-Bit Retro Computer Project
18 parts47CERN-OHL-P-2.0
Questions
How big is the Bobuino PCB?
It measures 87.5 × 95.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Bobuino use?
147 parts, built around the ATMEGA1284-AU, CH340G, AP1117DG and DW01. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Bobuino KiCad files?
From the llegoff/bobuino repository on GitHub, at the commit this page was made from: the board is v1backup/bobuino.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Bobuino design in my own project?
Its repository states no licence, so its author keeps all rights: ask llegoff before reusing the design.