Skip to the content

STM32

736 boards

KiCad boards from 367 GitHub repositories tagged “stm32”, the most starred first; open any of them in PCBKit.

  • 2 layers100 × 80 mmG474 Integrated Analyzer, the printed circuit board in 3D

    G474 Integrated Analyzer

    Larryhul/periodic-signal-analyzer

    STM32G474 periodic signal analyzer: FFT harmonic measurement (Upp/Urms/fundamental/spectrum), OPA2365 front end, KiCad PCB, firmware & dashboard. 2026 Shanghai electronic design contest, Problem G. 周期信号测量分析装置

    64 partsMIT
  • 4 layers180 × 180 mmTractor VCU, the printed circuit board in 3D

    Tractor VCU

    laurapreidewe/Agriculture-VCU_v1

    STM32 based Vehicle control unit (VCU) PCB for agricultural machinery. Made with KiCad 8, now updated to KiCad 10

    208 parts
  • 2 layers135 × 92 mmCurve tracer, the printed circuit board in 3D

    Curve tracer

    leedanie2/curve-tracer

    Programmable semiconductor curve tracer: STM32 firmware, two-layer KiCad PCB, SPICE Monte Carlo analysis, and a host-side SPICE-parameter extraction pipeline. Hardware in bring-up.

    88 parts
  • 4 layers54.2 × 28.1 mmSTM32-Bluetooth, the printed circuit board in 3D

    STM32-Bluetooth

    marwantm/STM32-Bluetooth

    STM32WB55 Bluetooth development board — KiCad PCB design project

    48 parts
  • 4 layers50 × 50 mmSTM32 DEV BOARD, the printed circuit board in 3D

    STM32 DEV BOARD

    MatheusCipolotti/STM32_Codes

    Repository dedicated to storing programming on STM32

    51 parts
  • 4 layers47.8 × 23.1 mmSoar sense, the printed circuit board in 3D

    Soar sense

    MaxBaex/hw_sense

    PCB design for tiny temperature and humidty sensor

    58 parts
  • 2 layers33 × 20.3 mmOphio, the printed circuit board in 3D

    Ophio

    maxses/hw-ophio

    USB to UART adapter board (KiCad)

    36 parts
  • 4 layers73 × 33 mmCAN485-dongle, the printed circuit board in 3D

    CAN485-dongle

    Mehdi-Ldj/usb-can-rs485-dongle

    CAN-485 diagnostic gateway — rev A hardware

    77 partsCERN-OHL-P-2.0
  • 2 layers50.3 × 91.2 mmSTM32TQ6401, the printed circuit board in 3D

    STM32TQ6401

    mlab-modules/STM32TQ6401

    STM32 in TQFP64 packages

    54 partsGPL-3.0
  • 4 layers92.1 × 62.8 mmMotor controller, the printed circuit board in 3D

    Motor controller

    mohamed-belal-10/can-motor-controller-node

    CAN-connected closed-loop DC motor controller node — KiCad hardware (STM32F103, DRV8874, SN65HVD230) with an AS5600 encoder sub-PCB

    55 partsMIT
  • 4 layers30.2 × 50 mmSTM32, the printed circuit board in 3D

    STM32

    MohamedSharfi/STM32WB-DEV-BOARD

    A Dev Board for STM32WBB55CEU

    48 parts
  • 2 layers47 × 40 mmPCB CAZIN CEGARRA, the printed circuit board in 3D

    PCB CAZIN CEGARRA

    nemocazin/stm32f030f4-bare-metal-programming

    Bare metal programming in C language on STM32F030F4 for a temperature sensor

    34 partsMIT
  • 2 layers50 × 90 mmTack STM32 V 1, the printed circuit board in 3D

    Tack STM32 V 1

    nexyugainnovations-collab/Tacktile_book_STM-Version

    STM32-based PCB design and audio files for the Tacktile interactive tactile book (v1.0)

    92 parts
  • 2 layers34 × 25.5 mmNicklink, the printed circuit board in 3D

    Nicklink

    NickStassen/nicklink

    NickLink v1.3 — compact STM32F103C8 breakout board (KiCad)

    46 partsMIT
  • 4 layers163.1 × 116.8 mmOpenParol, the printed circuit board in 3D

    OpenParol

    OpenParol/OpenParol-Board

    Open-source project for a 6-DOF robotic arm controller

    242 partsGPL-3.0
  • 4 layers65 × 55 mmGateway, the printed circuit board in 3D

    Gateway

    opensimgear/device-gateway

    Work-in-progress STM32 Cyphal/CAN-to-USB gateway with automatic input/output enrollment, ordered HID controllers, guarded configuration/leased action/event routing and native/Pico debug simulation.

    45 parts
  • 2 layers110 × 125 mmStarter, the printed circuit board in 3D

    Starter

    opensimgear/device-template

    Work-in-progress STM32G0B1 input/output module with USB HID or CDC-only profiles, Cyphal/CAN, persistent settings, ordered panel events, leased LED/display actions, KiCad hardware and native simulation.

    113 parts
  • 4 layers94.5 × 39.7 mmSTM32L4Q5CGT AudioSpectrumAnalyzer, the printed circuit board in 3D

    STM32L4Q5CGT AudioSpectrumAnalyzer

    OscarBazylewich/STM32_Audio_Spectrum_Analyzer_CustomPCB

    This repository contains a 4-layer KiCad board for the STM32 Audio Spectrum Analyzer. The board has an STM32L4Q5CGT6 MCU and an I2S MEMS microphone (ICS-43434).

    39 partsGPL-3.0
  • 4 layers85.6 × 54 mmSound spectrum v1, the printed circuit board in 3D

    Sound spectrum v1

    path321/sound_spectrum_mcu

    STM32-powered board to analyze sound from MEMS microphone

    40 partsMIT
  • 2 layers33.7 × 25.4 mmStm32f103 Muhammad Refansa Annaafi, the printed circuit board in 3D

    Stm32f103 Muhammad Refansa Annaafi

    Rennaafi/stm32f103-dev-board

    Compact 2-layer STM32F103 (LQFP-48) USB dev board designed in KiCad 9: schematic, PCB layout, Gerbers & BOM

    28 partsMIT
  • 4 layers55.9 × 55.9 mmQUADCOPTER, the printed circuit board in 3D

    QUADCOPTER

    Riskerx/QUADCOPTER

    QuadCopter Rev B: STM32F401 four-layer flight-controller PCB, manufacturing files, hardware documentation and firmware integration plan.

    103 parts
  • 2 layers31.8 × 61.6 mmRs423, the printed circuit board in 3D

    Rs423

    sambazley/dso475

    USB interface for Gould DSO 475 oscilloscope

    24 partsZlib