

A Dev Board for STM32WBB55CEU
- Size
- 30.2 × 50 mm
- Copper layers
- 4
- Thickness
- 1.48 mm
- Parts
- 48
- Nets
- 55
- Pads
- 222
- Tracks, vias
- 111, 6
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 1 Dec 2024
- Updated
- 19 Feb 2025
Overview
STM32 is an open-source printed circuit board by MohamedSharfi, from the MohamedSharfi/STM32WB-DEV-BOARD repository on GitHub. It is a 4-layer board of 30.2 × 50 mm with 48 parts on 55 nets, routed with 111 tracks and 6 vias.
It is built around the DLF162500LT-5028A1, MIC5365-3.3YD5-TR and USBLC6-2SC6. Its parts include 19 capacitors, 10 resistors, 6 connectors, 4 ICs and 3 diodes. It belongs with the STM32 boards of this library.
Main components
3DLF162500LT-5028A1
SMD-4P,1.6x0.8mm-40℃~+85℃ 0.33dB 2.4GHz~2.5GHz 49.2dB 50Ω Low Pass SMD-4P,1.6x0.8mm RF Filters ROHSTDKRF FiltersMIC5365-3.3YD5-TR
TSOT-23-5-40℃~+125℃@(Tj) 1 150mA 200uVrms 3.3V 310mV@(150mA) 39uA 5.5V 70dB@(1kHz) Fixed Over Current Protection、Over Temperature Protection、Enable Positive TSOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMicrochip TechnologyVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsUSBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)
README
README.mdSTM32 Development Breadboard Prototype
This repository contains the schematic, PCB design, and documentation for an STM32-based development prototype designed for breadboard testing and prototyping.
Project Status
Schematic : 100% Complete
PCB Design : 100% Complete
Documentation: 100% CompleteTable of Contents
Overview Features Getting Started Project Files Documentation Contributing License Overview This project aims to provide a robust STM32 development environment optimized for breadboard prototyping. It's ideal for my next projects development & testing.
Parts
48| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 100n | Capacitor_SMD:C_0402_1005Metric | C4, C5, C6, C7, C8, C9, C12, C13, C15, C19, C21 |
| 6 | 330 | Resistor_SMD:R_0402_1005Metric | R1, R4, R5, R6, R7, R9 |
| 4 | 4u7 | Capacitor_SMD:C_0603_1608Metric | C1, C2, C3, C17 |
| 3 | LED | LED_SMD:LED_0402_1005Metric | D1, D2, D3 |
| 2 | 5KR1 | Resistor_SMD:R_0402_1005Metric | R2, R3 |
| 2 | 5kR1 | Resistor_SMD:R_0402_1005Metric | R8, R10 |
| 2 | Conn_01x15_Pin | Connector_PinHeader_2.54mm:PinHeader_1x15_P2.54mm_Vertical | P0, P1 |
| 1 | 0p3 | Inductor_SMD:L_0402_1005Metric | C20 |
| 1 | 0p8 | Capacitor_SMD:C_0402_1005Metric | C18 |
| 1 | 10n | Inductor_SMD:L_0402_1005Metric | L1 |
| 1 | 10p | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C16 |
| 1 | 10p | Capacitor_SMD:C_0402_1005Metric | C14 |
| 1 | 10u | Inductor_SMD:L_0805_2012Metric | L2 |
| 1 | 2n7 | Inductor_SMD:L_0402_1005Metric | L3 |
| 1 | 32MHz | Crystal:Crystal_SMD_2016-4Pin_2.0x1.6mm | X2 |
| 1 | 32kHz768 | Crystal:Crystal_SMD_2012-2Pin_2.0x1.2mm | X1 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J4 |
| 1 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Horizontal | J2 |
| 1 | Conn_Coaxial | Connector_Coaxial:U.FL_Hirose_U.FL-R-SMT-1_Vertical | J5 |
| 1 | DLF162500LT-5028A1 | MY_PCB_library:DLF162500LT-5028A1 | U3 |
| 1 | MIC5365-3.3YD5 | Package_TO_SOT_SMD:SOT-23-5 | U1 |
| 1 | STM32WB55CEUx | Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.6x5.6mm | U0 |
| 1 | SW_MEC_5E | MY_PCB_library:TS18-5-25-SL-260-SMT-TR | SW1 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U2 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
Similar boards
- 4 layers58 × 31 mm

- 4 layers67.4 × 35.4 mm

- 4 layers48 × 33 mm

Stm32-bt board
OdaiJ/stm32-bt-board
My attempt at following the Phil's Lab KiCad V7 tutorial on YouTube
60 parts1 - 4 layers80.5 × 32.5 mm

Stm32wb55-ble dev board
shivamtiwari020505/stm32wb55-ble-dev-board
Custom STM32WB55 development board integrating 2.4GHz BLE 5.x, LPUART, I2C, and UART via RS232/DB9 for PC and industrial machine interfacing. Designed to bridge modern wireless IoT with legacy wired systems.
63 parts1MIT - 4 layers

- 4 layers117 × 77 mm

ProdDeck
arsovskiteodor/A.ProdDeck
Open-hardware macro pad (WIP): custom KiCad PCB with keys, encoders and a fader, plus firmware and a desktop configurator
69 parts - 4 layers48.5 × 24.3 mm

STM32 2nd Project
ashfaque-ur-rahman/STM32WB-RF-PCB-Design
STM32 microcontroller PCB design with RF capability —4 layer Board —KiCad project based on Phil's Lab tutorial series
48 parts - 4 layers29 × 43 mm

Flight controller
Bobev64/sensor-board
KiCAD design attempt at a flight controller for an RC airplane.
52 parts
Questions
How big is the STM32 PCB?
It measures 30.2 × 50 mm and has 4 copper layers, 1.48 mm thick.
What parts does the STM32 use?
48 parts, built around the DLF162500LT-5028A1, MIC5365-3.3YD5-TR and USBLC6-2SC6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the STM32 KiCad files?
From the MohamedSharfi/STM32WB-DEV-BOARD repository on GitHub, at the commit this page was made from: the board is KicAD/STM32.kicad_pcb and its schematic KicAD/STM32.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the STM32 design in my own project?
Its repository states no licence, so its author keeps all rights: ask MohamedSharfi before reusing the design.