

STM32 RF
Custom STM32 RF board designed in KiCad.
- Size
- 58 × 31 mm
- Copper layers
- 4
- Thickness
- 1.62 mm
- Parts
- 49
- Nets
- 55
- Pads
- 229
- Tracks, vias
- 281, 125
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 26 Jun 2025
- Updated
- 26 Jun 2025
Overview
STM32 RF is an open-source printed circuit board by Venky474, from the Venky474/STM32_RF_Demo_PCB repository on GitHub, published under the MIT licence. It is a 4-layer board of 58 × 31 mm with 49 parts on 55 nets, routed with 281 tracks and 125 vias.
It is built around the STM32WB55CEU6, DLF162500LT-5028A1 and MIC5365-3.3YD5-TR, with the USBLC6-2SC6 among its other parts. Its parts include 19 capacitors, 7 resistors, 4 connectors, 3 ICs and 3 inductors. It belongs with the radio and wireless boards and the STM32 boards of this library.
Main components
4STM32WB55CEU6
UFQFPN-48(7x7)UFQFPN-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)DLF162500LT-5028A1
SMD-4P,1.6x0.8mm-40℃~+85℃ 0.33dB 2.4GHz~2.5GHz 49.2dB 50Ω Low Pass SMD-4P,1.6x0.8mm RF Filters ROHSTDKRF FiltersMIC5365-3.3YD5-TR
TSOT-23-5-40℃~+125℃@(Tj) 1 150mA 200uVrms 3.3V 310mV@(150mA) 39uA 5.5V 70dB@(1kHz) Fixed Over Current Protection、Over Temperature Protection、Enable Positive TSOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMicrochip TechnologyVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsUSBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)
README
README.mdSTM32_RF_Demo_PCB
This is a custom STM32 RF PCB designed using KiCad.
Contents
- 🧩 KiCad Project Files (
.kicad_pro,.kicad_pcb,.kicad_sch) - 📦 Gerber Files (in
.rar) - 📄 BOM:
BOM_Output.csv - 🤖 Pick and Place:
STM32_RF.cpl
Preview
Preview of the STM32_RF PCB layout (generated using KiCad 3D viewer).

License
MIT or specify your own
Parts
49| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 100nF | Capacitor_SMD:C_0402_1005Metric | C4, C5, C7, C8, C9, C10, C11, C12, C13, C19 |
| 5 | 4.7uF | Capacitor_SMD:C_0603_1608Metric | C1, C2, C3, C6, C14 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_2.2mm_M2_Pad_Via | H1, H2, H3, H4 |
| 3 | 100R | Capacitor_SMD:C_0402_1005Metric | R1, R2, R6 |
| 3 | Fiducial | Fiducial:Fiducial_1mm_Mask2mm | FID1, FID2, FID3 |
| 2 | 10p | Capacitor_SMD:C_0402_1005Metric | C17, C18 |
| 2 | 5K1 | Capacitor_SMD:C_0402_1005Metric | R4, R5 |
| 1 | 0.3pF | Capacitor_SMD:C_0402_1005Metric | C16 |
| 1 | 0.8pF | Capacitor_SMD:C_0402_1005Metric | C15 |
| 1 | 10nH | Inductor_SMD:L_0402_1005Metric | L1 |
| 1 | 10uH | Inductor_SMD:L_0805_2012Metric | L2 |
| 1 | 2.7nH | Inductor_SMD:L_0402_1005Metric | L3 |
| 1 | 220R | Capacitor_SMD:C_0402_1005Metric | R3 |
| 1 | 32KHz768 | Crystal:Crystal_SMD_2012-2Pin_2.0x1.2mm | X1 |
| 1 | 32MHz | Crystal:Crystal_SMD_2016-4Pin_2.0x1.6mm | X2 |
| 1 | 5k1 | Capacitor_SMD:C_0402_1005Metric | R7 |
| 1 | Conn_01x04 | Connector_Molex:Molex_PicoBlade_53048-0410_1x04_P1.25mm_Horizontal | J1 |
| 1 | Conn_Coaxial | Connector_Coaxial:U.FL_Hirose_U.FL-R-SMT-1_Vertical | J3 |
| 1 | DLF162500LT-5028A1 | STM32_RF:Untitled | FLT1 |
| 1 | LED | Capacitor_SMD:C_0402_1005Metric | D1 |
| 1 | LOGO | LOGO | G |
| 1 | MIC5365-3.3YD5 | Package_TO_SOT_SMD:SOT-23-5 | U1 |
| 1 | STM32WB55CEU6 | Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.6x5.6mm | U3 |
| 1 | SW_Push | Button_Switch_SMD:SW_Tactile_SPST_NO_Straight_CK_PTS636Sx25SMTRLFS | SW1 |
| 1 | TC2030 | Connector:Tag-Connect_TC2030-IDC-FP_2x03_P1.27mm_Vertical | J4 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U2 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J2 |
Similar boards
- 4 layers67.4 × 35.4 mm

- 4 layers48 × 33 mm

Stm32-bt board
OdaiJ/stm32-bt-board
My attempt at following the Phil's Lab KiCad V7 tutorial on YouTube
60 parts1 - 4 layers80.5 × 32.5 mm

Stm32wb55-ble dev board
shivamtiwari020505/stm32wb55-ble-dev-board
Custom STM32WB55 development board integrating 2.4GHz BLE 5.x, LPUART, I2C, and UART via RS232/DB9 for PC and industrial machine interfacing. Designed to bridge modern wireless IoT with legacy wired systems.
63 parts1MIT - 4 layers

- 4 layers51 × 26 mm

- 4 layers50.8 × 26 mm

- 4 layers48 × 25 mm

Stm32mc
justinfederico/STM32testPCB
Custom STM32WB microcontroller to practice my PCB schematic and layout skills. Looking to get it printed soon! Bear in mind that this is an ameuter project, so there will probably be errors aplenty.
51 parts - 4 layers53.5 × 28.8 mm

STM32WB PCB2
NasserTaqi/STM32WB_Bluetooth_PCB
This project is a PCB built around an STM32WB for RF Bluetooth connection.
52 parts
Questions
How big is the STM32 RF PCB?
It measures 58 × 31 mm and has 4 copper layers, 1.62 mm thick.
What parts does the STM32 RF use?
49 parts, built around the STM32WB55CEU6, DLF162500LT-5028A1, MIC5365-3.3YD5-TR and USBLC6-2SC6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the STM32 RF KiCad files?
From the Venky474/STM32_RF_Demo_PCB repository on GitHub, at the commit this page was made from: the board is STM32_RF.kicad_pcb and its schematic STM32_RF.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the STM32 RF design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).