

UR buoyancy engine pcb
- Size
- 67.4 × 35.4 mm
- Copper layers
- 4
- Thickness
- 1.66 mm
- Parts
- 67
- Nets
- 63
- Pads
- 284
- Tracks, vias
- 464, 128
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 18 Apr 2026
- Updated
- 18 Apr 2026
Overview
UR buoyancy engine pcb is an open-source printed circuit board by michael1357az-oss, from the michael1357az-oss/UR_buoyancy_engine_pcb repository on GitHub. It is a 4-layer board of 67.4 × 35.4 mm with 67 parts on 63 nets, routed with 464 tracks and 128 vias.
It is built around the STM32WB55CEU6, SN74AHC125PW and DLF162500LT-5028A1, with the 74LVC1T45GW,125-JSM, MIC5365-3.3YD5-TR and USBLC6-2SC6 among its other parts. Its parts include 30 capacitors, 10 resistors, 8 connectors, 5 ICs and 3 inductors. It belongs with the STM32 boards of this library.
Main components
6STM32WB55CEU6
UFQFPN-48(7x7)UFQFPN-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)SN74AHC125PW
TSSOP-14-40℃~+125℃ 1 2V~5.5V 4 40uA 5.3ns@5V,50pF 74AHC 8mA 8mA Tri-State Unidirectional TSSOP-14 Buffers, Drivers, Receivers, Transceivers ROHSTexas InstrumentsBuffers, Drivers, Receivers, TransceiversDLF162500LT-5028A1
SMD-4P,1.6x0.8mm-40℃~+85℃ 0.33dB 2.4GHz~2.5GHz 49.2dB 50Ω Low Pass SMD-4P,1.6x0.8mm RF Filters ROHSTDKRF Filters74LVC1T45GW,125-JSM
SC-88-40℃~+125℃ 1 1.2V~5.5V 1.2V~5.5V 24mA 24mA Bidirectional Level translator Tri-State SC-88 Translators, Level Shifters ROHSJSMSEMITranslators, Level ShiftersMIC5365-3.3YD5-TR
TSOT-23-5-40℃~+125℃@(Tj) 1 150mA 200uVrms 3.3V 310mV@(150mA) 39uA 5.5V 70dB@(1kHz) Fixed Over Current Protection、Over Temperature Protection、Enable Positive TSOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMicrochip TechnologyVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsUSBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)
Parts
67| Qty | Value | Footprint | References |
|---|---|---|---|
| 18 | 100n | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C2, C3, C4, C5, C11, C12, C14, C15, C17, C22, C23, C24, C25, C28, C29, C30 +2 |
| 5 | 4u7 | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C13, C16, C26, C27 |
| 3 | 5k1 | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R5, R8, R9 |
| 3 | Fiducial | Fiducial:Fiducial_1mm_Mask2mm | FM1, FM2, FM3 |
| 3 | MountingHole | MountingHole:MountingHole_2.2mm_M2_Pad_Via | H1, H2, H3 |
| 2 | 10p | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C18, C19 |
| 2 | 220R | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R3, R4 |
| 2 | 4k7 | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R10, R11 |
| 1 | 0p3 | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | C20 |
| 1 | 0p8 | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | C21 |
| 1 | 100p | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C10 |
| 1 | 10k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R7 |
| 1 | 10n | Inductor_SMD:L_0402_1005Metric_Pad0.77x0.64mm_HandSolder | L2 |
| 1 | 10u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C9 |
| 1 | 10u | Inductor_SMD:L_0805_2012Metric_Pad1.05x1.20mm_HandSolder | L1 |
| 1 | 1u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C8 |
| 1 | 2n7 | Inductor_SMD:L_0402_1005Metric_Pad0.77x0.64mm_HandSolder | L3 |
| 1 | 300R | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R12 |
| 1 | 32MHz | Crystal:Crystal_SMD_2016-4Pin_2.0x1.6mm | X1 |
| 1 | 32kHz768 | Crystal:Crystal_SMD_2012-2Pin_2.0x1.2mm_HandSoldering | X2 |
| 1 | 6k8 | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R6 |
| 1 | 74LVC1T45GW_125 | UR:TSSOP6_SOT363-2_NEX | U4 |
| 1 | AS32 pads | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J5 |
| 1 | Conn_01x01_Pin | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J3 |
| 1 | Conn_01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J8 |
| 1 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J7 |
| 1 | Conn_01x05_Pin | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J4 |
| 1 | Conn_ARM_SWD_TagConnect_TC2030 | Connector:Tag-Connect_TC2030-IDC-FP_2x03_P1.27mm_Vertical | J9 |
| 1 | Conn_Coaxial | Connector_Coaxial:WR-MMCX_Wuerth_66012102111404_Vertical | J2 |
| 1 | DLF162500LT-5028A1 | UR:DLF-4_1P6X0P8 | FLT1 |
| 1 | LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1 |
| 1 | MIC5365-3.3YD5 | Package_TO_SOT_SMD:TSOT-23-5 | U2 |
| 1 | SN74AHC125PW | UR:SOP65P640X120-14N | U1 |
| 1 | STM32WB55CEU6 | Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.6x5.6mm | U5 |
| 1 | SW_Push | Button_Switch_SMD:SW_SPST_CK_RS282G05A3 | SW1 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U3 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J6 |
Similar boards
- 4 layers58 × 31 mm

- 4 layers48 × 33 mm

Stm32-bt board
OdaiJ/stm32-bt-board
My attempt at following the Phil's Lab KiCad V7 tutorial on YouTube
60 parts1 - 4 layers80.5 × 32.5 mm

Stm32wb55-ble dev board
shivamtiwari020505/stm32wb55-ble-dev-board
Custom STM32WB55 development board integrating 2.4GHz BLE 5.x, LPUART, I2C, and UART via RS232/DB9 for PC and industrial machine interfacing. Designed to bridge modern wireless IoT with legacy wired systems.
63 parts1MIT - 4 layers

- 4 layers51 × 26 mm

- 4 layers50.8 × 26 mm

- 4 layers48 × 25 mm

Stm32mc
justinfederico/STM32testPCB
Custom STM32WB microcontroller to practice my PCB schematic and layout skills. Looking to get it printed soon! Bear in mind that this is an ameuter project, so there will probably be errors aplenty.
51 parts - 4 layers53.5 × 28.8 mm

STM32WB PCB2
NasserTaqi/STM32WB_Bluetooth_PCB
This project is a PCB built around an STM32WB for RF Bluetooth connection.
52 parts
Questions
How big is the UR buoyancy engine pcb PCB?
It measures 67.4 × 35.4 mm and has 4 copper layers, 1.66 mm thick.
What parts does the UR buoyancy engine pcb use?
67 parts, built around the STM32WB55CEU6, SN74AHC125PW, DLF162500LT-5028A1 and 74LVC1T45GW,125-JSM. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the UR buoyancy engine pcb KiCad files?
From the michael1357az-oss/UR_buoyancy_engine_pcb repository on GitHub, at the commit this page was made from: the board is hardware/hardware.kicad_pcb and its schematic hardware/hardware.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the UR buoyancy engine pcb design in my own project?
Its repository states no licence, so its author keeps all rights: ask michael1357az-oss before reusing the design.