

BluetoothBoardSTM32
- Size
- 51 × 26 mm
- Copper layers
- 4
- Thickness
- 1.58 mm
- Parts
- 48
- Nets
- 52
- Pads
- 197
- Tracks, vias
- 263, 110
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 5 Nov 2024
- Updated
- 5 Nov 2024
Overview
BluetoothBoardSTM32 is an open-source printed circuit board by DedeMarantes, from the DedeMarantes/STM32-Bluetooth-Board-PCB repository on GitHub. It is a 4-layer board of 51 × 26 mm with 48 parts on 52 nets, routed with 263 tracks and 110 vias.
It is built around the STM32WB55CEU6, DLF162500LT-5028A1 and MIC5365-3.3YD5-TR, with the USBLC6-2SC6 among its other parts. Its parts include 19 capacitors, 7 resistors, 4 connectors, 3 ICs and 3 inductors. It belongs with the STM32 boards of this library.
Main components
4STM32WB55CEU6
UFQFPN-48(7x7)UFQFPN-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)DLF162500LT-5028A1
SMD-4P,1.6x0.8mm-40℃~+85℃ 0.33dB 2.4GHz~2.5GHz 49.2dB 50Ω Low Pass SMD-4P,1.6x0.8mm RF Filters ROHSTDKRF FiltersMIC5365-3.3YD5-TR
TSOT-23-5-40℃~+125℃@(Tj) 1 150mA 200uVrms 3.3V 310mV@(150mA) 39uA 5.5V 70dB@(1kHz) Fixed Over Current Protection、Over Temperature Protection、Enable Positive TSOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMicrochip TechnologyVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsUSBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)
Parts
48| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 100nF | Capacitor_SMD:C_0402_1005Metric | C2, C4, C6, C8, C11, C12, C14, C15, C16, C17 |
| 5 | 4.7uF | Capacitor_SMD:C_0603_1608Metric | C1, C9, C13, C18, C19 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_2.2mm_M2_Pad | H1, H2, H3, H4 |
| 3 | 100 | Resistor_SMD:R_0402_1005Metric | R1, R4, R5 |
| 3 | 5.1k | Resistor_SMD:R_0402_1005Metric | R2, R6, R7 |
| 3 | Fiducial | Fiducial:Fiducial_1mm_Mask2mm | FID1, FID2, FID3 |
| 2 | 10pF | Capacitor_SMD:C_0402_1005Metric | C7, C10 |
| 1 | 0.3pF | Capacitor_SMD:C_0402_1005Metric | C5 |
| 1 | 0.8pF | Capacitor_SMD:C_0402_1005Metric | C3 |
| 1 | 10nH | Inductor_SMD:L_0402_1005Metric | L3 |
| 1 | 10uH | Inductor_SMD:L_0805_2012Metric | L2 |
| 1 | 2.7nH | Inductor_SMD:L_0402_1005Metric | L1 |
| 1 | 220 | Resistor_SMD:R_0402_1005Metric | R3 |
| 1 | 32.768kHz | Crystal:Crystal_SMD_2012-2Pin_2.0x1.2mm | X2 |
| 1 | 32MHz | Crystal:Crystal_SMD_2016-4Pin_2.0x1.6mm | X1 |
| 1 | Conn_01x04 | Connector_Molex:Molex_PicoBlade_53047-0410_1x04_P1.25mm_Vertical | J2 |
| 1 | Conn_ARM_SWD_TagConnect_TC2030 | Connector:Tag-Connect_TC2030-IDC-FP_2x03_P1.27mm_Vertical | J3 |
| 1 | Conn_Coaxial | Connector_Coaxial:U.FL_Hirose_U.FL-R-SMT-1_Vertical | J1 |
| 1 | DLF162500LT-5028A1 | BluetoothBoardSTM32-PCBFootprint:DLF162500LT-5028A1 | FLT1 |
| 1 | LED | LED_SMD:LED_0402_1005Metric | D1 |
| 1 | MIC5365-3.3YD5 | Package_TO_SOT_SMD:SOT-23-5 | U3 |
| 1 | STM32WB55CEU6 | Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.6x5.6mm | U1 |
| 1 | SW_Push | Button_Switch_SMD:SW_SPST_B3U-1000P | SW1 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U2 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J4 |
Similar boards
- 4 layers58 × 31 mm

- 4 layers67.4 × 35.4 mm

- 4 layers48 × 33 mm

Stm32-bt board
OdaiJ/stm32-bt-board
My attempt at following the Phil's Lab KiCad V7 tutorial on YouTube
60 parts1 - 4 layers80.5 × 32.5 mm

Stm32wb55-ble dev board
shivamtiwari020505/stm32wb55-ble-dev-board
Custom STM32WB55 development board integrating 2.4GHz BLE 5.x, LPUART, I2C, and UART via RS232/DB9 for PC and industrial machine interfacing. Designed to bridge modern wireless IoT with legacy wired systems.
63 parts1MIT - 4 layers

- 4 layers50.8 × 26 mm

- 4 layers48 × 25 mm

Stm32mc
justinfederico/STM32testPCB
Custom STM32WB microcontroller to practice my PCB schematic and layout skills. Looking to get it printed soon! Bear in mind that this is an ameuter project, so there will probably be errors aplenty.
51 parts - 4 layers53.5 × 28.8 mm

STM32WB PCB2
NasserTaqi/STM32WB_Bluetooth_PCB
This project is a PCB built around an STM32WB for RF Bluetooth connection.
52 parts
Questions
How big is the BluetoothBoardSTM32 PCB?
It measures 51 × 26 mm and has 4 copper layers, 1.58 mm thick.
What parts does the BluetoothBoardSTM32 use?
48 parts, built around the STM32WB55CEU6, DLF162500LT-5028A1, MIC5365-3.3YD5-TR and USBLC6-2SC6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the BluetoothBoardSTM32 KiCad files?
From the DedeMarantes/STM32-Bluetooth-Board-PCB repository on GitHub, at the commit this page was made from: the board is BluetoothBoardSTM32.kicad_pcb and its schematic BluetoothBoardSTM32.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the BluetoothBoardSTM32 design in my own project?
Its repository states no licence, so its author keeps all rights: ask DedeMarantes before reusing the design.