4 layers120 × 75 mm
Portapack h1
portapack-mayhem/mayhem-firmware
The firmware for the HackRF+PortaPack H1/H2/H4/H4M
111 parts5.5kGPL-3.0
SDR
74 boardsKiCad boards from 29 GitHub repositories tagged “sdr”, the most starred first; open any of them in PCBKit.
- 2 layers54.6 × 89.5 mm
- 2 layers50.9 × 22.9 mm
FeatherWing nRF24L01 Adapter
rfquack/RFQuack
RFQuack: the versatile RF-analysis tool that quacks!
14 parts348GPL-2.0 - 4 layers150 × 90 mm
Misrc v2.5-rounded
Stefan-Olt/MISRC
MISRC Is a multi channel RF capture device for FM RF, S-Video, CVBS RAW capture and anything else, but intended and supported for the decode family of projects vhs-decode, ld-decode, hifi-decode.
328 parts236CC-BY-4.0 - 2 layers100 × 71.8 mm
- 4 layers60.2 × 20.8 mm
PhaseLatchMini
AndersBNielsen/PhaseLatchMini
High-rate continuous streaming of interleaved dual ADC (I/Q) samples over USB Full‑Speed (FS) using only the built‑in CDC class on an STM32F103C8 ("Blue Pill" style) board.
63 parts72 - 2 layers36 × 64 mm
Extension clk adc
oscimp/oscimpDigital
OscillatorIMP ecosystem for the digital characterization of ultrastable oscillators and Software Defined Radio (SDR) frontend processing
34 parts59 - 4 layers68.8 × 53.6 mm
- 2 layers60.5 × 72.9 mm
CmodA7 twtft
oscimp/amaranth_twstft
Software Defined Radio implementation of a Two Way Satellite Time and Frequency Transfer signal
31 parts32GPL-3.0 - 2 layers101.5 × 54 mm
Simkarte
osmocom/osmocom-analog
Software Implementation of analog cellular telephony systems like NMT, TACS, IMTS, A/B/C-Netz; mirror of https://gitea.osmocom.org/cellular-infrastructure/osmocom-analog
15 parts32GPL-3.0 - 4 layers70.7 × 53.3 mm
- 2 layers10 × 12 mm
USB C RTL SDR mod v1.0
umbertoragone/usbc-rtl-sdr
A PCB adapter board to convert your RTL-SDR V3/V4 dongle from USB-A to USB-C
4 parts27MIT - 2 layers98 × 54.5 mm
Pico2 dual12bitadc
Sev5000/RP2350B_DualADC_DualPCM
A PCB to neatly package a rp2350b with two 12bit high speed adc and four channel audio input for use with hsdaoh
76 parts23 - 4 layers55.5 × 64.5 mm
Pico2 12bitadc
Sev5000/Pico2_12bitADC_PCMAudio
PCB to neatly package a Raspberry Pi Pico 2 with an AD9226 12bit ADC and PCM1802 for capture with HSDAOH
36 parts22 - 4 layers18.5 × 15 mm
Openstint transponder
zsellera/openstint-transponder
Reference design of OpenStint transponder with ATTiny816
39 parts14 - 4 layers238.4 × 144.7 mm
- 2 layers79.8 × 23.9 mm
- 10 layers160 × 100 mm
Cirradio devboard
mangobanaani/cirradio
Tactical UHF FHSS mesh radio: Zynq-7045 + AD9361, SystemVerilog RTL, C++20 comms stack, AES-256 PKCS#11 crypto
316 parts8MIT - 2 layers
Vhf uhf IQ Modulator
antonjan/IQ_Modulator
IQ Modulator for 2M and 70cm from I2C and ALSA PCM Audio on Orange PI Zero (Estimated TX Power 500mW)
88 parts7GPL-3.0 - 6 layers330 × 200 mm
Pcb b compute
meshsat/meshsat-fieldkit
MeshSat field kit hardware: the V1 kits as built, the V2 carrier PCB set for the Peli 1450 and the compact pocket-sized node (KiCad and OpenSCAD sources, generators, release files, build guides).
957 parts4CERN-OHL-S-2.0 - 4 layers65 × 56.5 mm
- 4 layers99.8 × 73.8 mm
- 8 layers217.5 × 187.5 mm
Board c openroute partial
ajisrawi/passive-radar-counter-drone
Passive radar for counter-drone using DVB-T, 4G and 5G: simulation, receiver hardware, FPGA micro-Doppler firmware, antennas, enclosure
314 parts3 - 4 layers90 × 90 mm
Sahel pcb
Aliou8/SAHEL-SPECTRA-RF
CubeSat for educational purposes. It is based on an STM32H7 MCU for data handling and uses two CC1125 radios for communication. The software is developed using a Zephyr-like RTOS.
172 parts2GPL-3.0