PCB

2,721 boards

KiCad boards from 1,297 GitHub repositories tagged “pcb”, the most starred first; open any of them in PCBKit.

2 layers33 × 43.9 mm
Mux board v5
charkster/mux_board_v5
Custom PCB with SAMD21 QT PY controlling TWO ADG1606BRUZ 16 input muxes! This board is 30% smaller than V3 and uses a single 16x2 pin header.
6 parts1MIT
2 layers51.3 × 20.3 mm
Rpi 8x2 v1
charkster/rpi_level_shifter_v1
rpi_level_shifter_v1
18 parts1MIT
2 layers26.9 × 38.3 mm
Xiao level shifter v1
charkster/xiao_rp2040_level_shifter_v1
Add-on PCB board for Seeed Studio Xiao RP2040, which provides 1.2V and 1.8V selectable level-shifting.
14 parts1MIT
2 layers100 × 76 mm
Bt controller
Chill-Sam/SpeakerSystem
Home speaker system
44 parts1
4 layers77.2 × 86.4 mm
Mad RP2040
Cimos/etchy
Fast, trustworthy PCB visual and geometric diff tool (Rust). Successor to gerber-diff.
117 parts1Apache-2.0
2 layers8.6 × 9.2 mm
Tascamusbc
circuitsable/TascamDR40usbc
A PCB to turn Tascam's DR-40 into a USB C device
4 parts1GPL-3.0
2 layers212.2 × 69 mm
Nullwing pcb
CityRunner/nullwing-keyboard
Through hole mechanical keyboard with rotary encoder
85 parts1
2 layers343.8 × 98.1 mm
CL70 PCB
Clein-KR/CL70
Custom keyboard designed for the first time
213 parts1
2 layers21 × 50 mm
Atmega32u4 dev board
Coolbots7/development-boards
Collection of PCBs for testing core designs.
39 parts1
2 layers165.1 × 95.3 mm
Pico concole v2 daughter board
Crem2y/pico-console-v2-pcb
pico console v2 board (firmware : https://github.com/Crem2y/pico-console-v2)
232 parts1MIT
2 layers314.3 × 95.3 mm
Borsdorf
Cutie-Club/Borsdorf
KiCad project files for the Borsdorf keyboard.
131 parts1CC-BY-SA-4.0
2 layers166.5 × 133.7 mm
Porta
cykedev/porta
58 key ergonomic split keyboard, built with ergogen
71 parts1
2 layers63 × 40.6 mm
Transmitter
damianmoore/audio-lighting-broadcast
Spectrum analyser lighting display broadcast across many receiver RGB LED nodes
39 parts1
2 layers46.4 × 20.3 mm
Wifi lamp
damianmoore/wifi-lamp
A simple wifi-enabled lamp control board based on the ESP8266
9 parts1GPL-3.0
2 layers15.5 × 21.2 mm
Prueba1 KiCad
DarielPerez/Diseno_Mecatronico
Repositorio destinado para almacenar los recursos correspondiente a la materia Diseño Mecatrónico.
21 parts1
2 layers75.2 × 59.6 mm
MyHackpad
Dee-24r/d-pad
The design for my first personal macropad. It contains the schematic and pcb designs, case design, and firmware. My hackpad has 5 keys, a rotary encoder, an OLED dsiplay screen and 3 rgb led lights.
17 parts1
2 layers35.5 × 20.8 mm
Two led indicator
Deepu-Bhai5/two-led-indicator-pcb
A beginner KiCad PCB design project for a two-channel LED indicator, covering schematic capture, PCB layout, routing, DRC validation, and Gerber generation.
5 parts1
2 layers72 × 59 mm
Muon
Dekanova/muon-kbd
Simple OSU! keypad
61 parts1
2 layers51.3 × 14.7 mm
Lcdconn50
deltabeard/lcdconn50
Raspberry Pi Breakout Board for a 50 Pin LCD Connector (KD026 FM)
8 parts1CC-BY-SA-4.0
2 layers223.8 × 240.4 mm
Nerf target v1 panel
DIaLOGIKa-GmbH/modular-nerf-target
A hex-based modular system to build custom nerf gun targets
346 parts1MIT
2 layers44 × 33 mm
STM32-USBb
diegomrno/STM32-USBb
Experimental PCB based on an STM32 microcontroller with USB type B
32 parts1
2 layers65 × 56 mm
DoppelLoraModulauf Raspi
DJ2RF/DoppelLoraModul-RaspberryPi-HAT
Raspberry HAT for Nerdverlag LoRa Analyser or any other projects
13 parts1MIT
4 layers41.3 × 42.5 mm
Wifi ble antenna
Dominik-Workshop/wifi-ble-antenna
PCB antenna for 2.4GHz with SMA connector
6 parts1MIT
2 layers30 × 65 mm
Dakboard HDMI dimmer v1
DotaPie/Dakboard-HDMI-dimmer-HW
Custom Raspberry Pi HAT with a BH1750 light sensor and PIR motion sensor for automatic HDMI display dimming. KiCAD source and JLCPCB-ready gerbers. Fits any Raspberry Pi with a 40-pin header.
17 parts1EUPL-1.2