
Receiver
damianmoore/audio-lighting-broadcast
Spectrum analyser lighting display broadcast across many receiver RGB LED nodes

Spectrum analyser lighting display broadcast across many receiver RGB LED nodes
Transmitter is an open-source printed circuit board by damianmoore, from the damianmoore/audio-lighting-broadcast repository on GitHub. It is a 2-layer board of 63 × 40.6 mm with 39 parts on 45 nets, routed with 164 tracks and 15 vias.
It is built around the ATMEGA328P-PU. Its parts include 11 capacitors, 8 resistors, 5 connectors, 4 ICs and 4 diodes. It belongs with the lEDs and displays and sensors and measurement boards and the AVR (ATmega, ATtiny) boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | R | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R3, R4, R5, R6, R7, R8 |
| 3 | 10uF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C1, C4, C5 |
| 3 | LED | LED_THT:LED_D3.0mm | D2, D3, D4 |
| 2 | 100nF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C8, C9 |
| 2 | 10nF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C6, C10 |
| 2 | 22k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R1, R2 |
| 2 | 22pF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C2, C3 |
| 2 | AudioJack3 | kicad-custom-parts:3.5mm_Stereo_Jack | J3, J4 |
| 2 | SW_SPST | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | SW1, SW2 |
| 1 | 100mH | Inductor_THT:L_Toroid_Vertical_L16.0mm_W8.0mm_P7.62mm | L1 |
| 1 | 100uF | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C11 |
| 1 | 16Mhz | Crystal:Crystal_HC18-U_Vertical | Y1 |
| 1 | 33pF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C7 |
| 1 | ATmega328P-PU | Package_DIP:DIP-28_W7.62mm | U1 |
| 1 | Conn_01x02 | Connector_Wire:SolderWirePad_1x02_P3.81mm_Drill1mm | J1 |
| 1 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | Conn_02x03_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J5 |
| 1 | D | Diode_THT:D_A-405_P7.62mm_Horizontal | D1 |
| 1 | MH-M18 | kicad-custom-parts:MH-M18_Bluetooth_Audio | U3 |
| 1 | MSGEQ7 | Package_DIP:DIP-8_W10.16mm | U4 |
| 1 | NRF24L01_Breakout | RF_Module:nRF24L01_Breakout | U2 |
| 1 | Polyfuse | Crystal:Resonator-2Pin_W6.0mm_H3.0mm | F1 |
| 1 | SW_Push | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | SW3 |
The 38 most common of 39 parts.

damianmoore/audio-lighting-broadcast
Spectrum analyser lighting display broadcast across many receiver RGB LED nodes

damianmoore/audio-lighting-broadcast
Spectrum analyser lighting display broadcast across many receiver RGB LED nodes

zmaker/arduino_cookbook
gli sketch del nuovo progetto Arduino Cookbook e dei video di YouTube

coseyfannitutti/discipad
17-key numpad assembled with only through hole components, including usb type-c

matthewcieplak/super-sixteen
Code and schematics for the Super Sixteen Eurorack sequencer

coseyfannitutti/romeo
Staggered 40% keyboard pcb that can be assembled with only through hole components, including USB Type-C

mattybrad/drumkid
Version 4 was the first successful working design, with full code, schematics, Gerbers, etc available on GitHub.


leomil72/LM80C
A Z80-based homebrew computer withTMS9918, AY-3-8910, Z80 CTC, Z80 PIO, and Z80 SIO

It measures 63 × 40.6 mm and has 2 copper layers, 1.6 mm thick.
39 parts, built around the ATMEGA328P-PU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the damianmoore/audio-lighting-broadcast repository on GitHub, at the commit this page was made from: the board is kicad/transmitter/transmitter.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask damianmoore before reusing the design.