Skip to the content

PCB design

1,387 boards

KiCad boards from 598 GitHub repositories tagged “pcb-design”, the most starred first; open any of them in PCBKit.

  • 2 layers48.9 × 56 mmEMLeakage, the printed circuit board in 3D

    EMLeakage

    1sand0s/AT89S51-8051-General-Purpose-Board

    This is a general purpose AT89S51 (8051) board.

    23 partsMIT
  • 2 layers54.5 × 90 mmDev board, the printed circuit board in 3D

    Dev board

    21shravan/AT89s51-dev-board

    A modern AT89S52 (8051) development board featuring USB Type-C power, CH340C USB-to-UART, ISP programming, and a complete open-source hardware design documented from schematic to PCB.

    44 parts
  • 2 layers54.3 × 17.1 mmDiscrete CMOS Logic Gate Arrays, the printed circuit board in 3D

    Discrete CMOS Logic Gate Arrays

    876valeri3/Discrete-CMOS-Logic-Gate-Arrays

    PCB designs of the fundamental logic gates using CMOS

    36 partsMIT
  • 4 layers60 × 47 mmStepper controller, the printed circuit board in 3D

    Stepper controller

    abdallah-yasser/stepper-motor-controller-pcb

    4-layer KiCad PCB: Arduino-compatible stepper motor controller (ATmega328P + DRV8825)

    63 partsMIT
  • 4 layers40 × 30 mmHealth Watch, the printed circuit board in 3D

    Health Watch

    abendezu10/PulseWatch

    Developed a fully functional smartwatch using an STM32 microcontroller, featuring real-time heart rate monitoring.

    37 parts
  • 2 layers60 × 36.5 mmIr sensor, the printed circuit board in 3D

    Ir sensor

    Agilan74/IR-Obstacle-Detection-Sensor-PCB

    Custom IR obstacle detection sensor PCB designed using KiCad.

    17 parts
  • 2 layers60.1 × 40 mmMicrophone, the printed circuit board in 3D

    Microphone

    AhmedYehia-M23/low-noise-microphone-preamplifier

    Low-noise 5 V electret microphone preamplifier with adjustable 30–40 dB gain, AD8656 analog front end, KiCad PCB design, and LTspice validation.

    27 parts
  • 4 layers230 × 152 mmSENTINEL TRM, the printed circuit board in 3D

    SENTINEL TRM

    ajisrawi/sentinel-uhf-radar

    Reference design of a two-face UHF early-warning phased-array radar: system sizing, MoM antenna simulation, seven KiCad PCB projects, Blender site model

    144 parts
  • 4 layers47.1 × 45.3 mmMixed signal Board Rev D, the printed circuit board in 3D

    Mixed signal Board Rev D

    Akhilesh-design-02/STM32F407-Hardware-Design

    4-layer STM32F407 mixed-signal PCB design featuring I2C/I2S/USB interfaces, SGP40 & SHT40 sensors, power plane splits, and star grounding for noise isolation.

    92 parts
  • 4 layers150 × 100 mmInterrupter v1.2, the printed circuit board in 3D

    Interrupter v1.2

    Alberto0235/DRSSTC-Fiber-Optic-Interrupter

    Custom 4-layer interrupter control board for DRSSTC systems. STM32F405-based, fiber-optically isolated outputs, hardware E-brake safety chain, and controlled-impedance routing (90Ω USB, 50Ω FSMC/SDIO).

    212 partsMIT
  • 2 layers73.7 × 57.1 mmLightDudu4Lila, the printed circuit board in 3D

    LightDudu4Lila

    AleBerta311/LightPCB

    A simple PCB schematic for USB LED light that turns on when it's dark.

    36 partsGPL-3.0
  • 2 layers50 × 40 mmEsp32c3-sensor node, the printed circuit board in 3D

    Esp32c3-sensor node

    Alexden28/esp32c3-sensor-node-pcb

    2-layer ESP32-C3 + SHT40 USB-C sensor node in KiCad 10, generated from Python, autorouted, ERC/DRC clean, with Gerbers/BOM/CPL/STEP

    28 partsMIT
  • 2 layers80 × 80 mmProjeto Final, the printed circuit board in 3D

    Projeto Final

    alighieribot/lpc11u14-board-bringup

    Board bring-up, hardware debugging & validation, and event-driven bare-metal firmware (ARM Cortex-M0 LPC11U14F) | UNIFEI PBLE02

    64 partsMIT
  • 2 layers130 × 100 mmAudiovisualiser, the printed circuit board in 3D

    Audiovisualiser

    alimleahat/analog-audio-visualizer-pcb

    Three-band analog audio visualizer built in KiCad for ELEC2101, with PCB files, assembly photos, and bench measurements.

    69 parts
  • 4 layers45 × 45 mmESP32-S3-SMALL, the printed circuit board in 3D

    ESP32-S3-SMALL

    AMIFEX-IT/ESP32-S3-SMALL

    Custom ESP32-S3 development board designed in KiCad, featuring the ESP32-S3-WROOM-1-N8R8 module, custom schematic, PCB layout, and supporting hardware design files

    33 partsMIT
  • 2 layers62 × 92 mmLedhexdisp, the printed circuit board in 3D

    Ledhexdisp

    anachrocomputer/LedHex

    Programs and CAD files for the LED hex display PCB.

    39 partsGPL-3.0
  • 2 layers100 × 61 mmBadge, the printed circuit board in 3D

    Badge

    AnakinDmaker/badge_pcb

    KiCad PCB design for a custom ESP32-S3 smart badge — schematic, layout, and silkscreen art

    27 partsMIT
  • 4 layers61.6 × 95.8 mmIn car dashboard, the printed circuit board in 3D

    In car dashboard

    andreiii04/in-car-dashboard

    Custom STM32 in-car telemetry display: G-meter, GPS speed and cabin weather on a 2.8" TFT, with each drive logged to SD.

    51 partsMIT
  • 2 layers39.7 × 24.5 mmStm32, the printed circuit board in 3D

    Stm32

    Annusingh002/custom-stm32-pcb

    Custom STM32 development board designed in KiCad with complete schematic, PCB layout, and Gerber files.

    28 parts
  • 6 layers13 × 11.1 mmELRS Receiver, the printed circuit board in 3D

    ELRS Receiver

    aprskalo1/nano24-elrs-receiver

    nano24: compact 2.4 GHz ExpressLRS receiver prototype with ESP32-C3, SX1281, CRSF and a printed Wi-Fi antenna. KiCad sources, BOM, Gerbers and validation notes.

    47 partsCERN-OHL-S-2.0
  • 2 layers60 × 51.5 mmNanoEvery Replica, the printed circuit board in 3D

    NanoEvery Replica

    arhamrizwan2006/arduino-nano-every-pcb-replica

    Chip-level PCB replica of the Arduino Nano Every (ABX00028), designed in KiCad 10 — full schematic, routing, and manufacturing files

    23 parts
  • 4 layers117 × 77 mmProdDeck, the printed circuit board in 3D

    ProdDeck

    arsovskiteodor/A.ProdDeck

    Open-hardware macro pad (WIP): custom KiCad PCB with keys, encoders and a fader, plus firmware and a desktop configurator

    69 parts
  • 6 layers120 × 40 mmCM5Carrier, the printed circuit board in 3D

    CM5Carrier

    AsadImranRafique/CM5-Carrier-Board

    Custom Raspberry Pi CM4/CM5 carrier board with PoE, Gigabit Ethernet, M.2 NVMe, microSD and peripheral interfaces.

    54 partsApache-2.0
  • 2 layers54 × 27 mmACtoDC converter, the printed circuit board in 3D

    ACtoDC converter

    ashfaque-ur-rahman/Amateur-AC-DC-Bridge-Rectifier-PCB

    Basic AC to DC converter using bridge rectifier and capacitor filter — KiCad PCB design

    14 parts