Skip to the content

PCB design

1,387 boards

KiCad boards from 598 GitHub repositories tagged “pcb-design”, the most starred first; open any of them in PCBKit.

  • 2 layers78.7 × 87.6 mmRelay board-2, the printed circuit board in 3D

    Relay board-2

    balazsgrill/pcb-relay-board-2

    Printed Circuit Board for 5V Relays x8

    50 parts1CC0-1.0
  • 2 layers117 × 81.5 mmPressLog Edge Node, the printed circuit board in 3D

    PressLog Edge Node

    bansalsaksham/PressLog

    Manufacturing-ready PCB design for an industrial IoT downtime-logging edge node. Offline-first firmware architecture, KiCad schematics, Gerbers, and BOM.

    45 parts1
  • 4 layers90 × 36 mmA3-before crystal refinement, the printed circuit board in 3D

    A3-before crystal refinement

    bdini13/esp32-cc1101-multiband

    Work-in-progress ESP32-WROOM-32E + CC1101 multiband PCB: software-selected 315/433/868/915 MHz paths. AI-assisted engineering draft; not manufacturing-ready.

    121 parts1
  • 4 layers65 × 56.5 mmTangnano9k kr260-hat, the printed circuit board in 3D

    Tangnano9k kr260-hat

    calperxd/tangnano9k-kr260-hat

    FPGA HAT for the AMD Kria KR260 based on the Tang Nano 9K (Gowin GW1NR-9, FT2232H, 16-bit parallel link on J21): KiCad 10 schematic, 4-layer PCB and JLCPCB production files

    181 parts1
  • 2 layers161.8 × 100 mmEinstein boltzmann, the printed circuit board in 3D

    Einstein boltzmann

    CarlosCraveiro/einstein-boltzmann

    Remake of the board of the 5-th EPO (2017), using KiCAD 7.0, to measure the Boltzmann constant through the analysis of the thermal noise of a resistor.

    63 parts1CERN-OHL-S-2.0
  • 2 layers94 × 76.2 mmChip breakout, the printed circuit board in 3D

    Chip breakout

    cbluoss/package_breakout

    A simple breakout pcb for different chip packages

    15 parts1
  • 2 layers70.7 × 70.7 mmWhistler mic array, the printed circuit board in 3D

    Whistler mic array

    ccc909/Whistler

    Open-source 16-channel USB MEMS microphone array: KiCad PCB design, XMOS XU316 (xcore.ai) USB Audio Class 2 firmware with DFU, BOM and JLCPCB-ready production files. CERN-OHL-S.

    96 parts1CERN-OHL-S-2.0
  • 4 layers100 × 80 mmEmb multirail smps, the printed circuit board in 3D

    Emb multirail smps

    CGainsWorks/emb-multirail-smps

    Compact multi-output switch-mode power supply in Altium: synchronous buck, boost and LDO stages on a 4-layer board, with loop compensation, thermal analysis and EMC pre-compliance.

    79 parts1MIT
  • 2 layers15.5 × 21.2 mmPrueba1 KiCad, the printed circuit board in 3D

    Prueba1 KiCad

    DarielPerez/Diseno_Mecatronico

    Repositorio destinado para almacenar los recursos correspondiente a la materia Diseño Mecatrónico.

    21 parts1
  • 2 layers35.5 × 20.8 mmTwo led indicator, the printed circuit board in 3D

    Two led indicator

    Deepu-Bhai5/two-led-indicator-pcb

    A beginner KiCad PCB design project for a two-channel LED indicator, covering schematic capture, PCB layout, routing, DRC validation, and Gerber generation.

    5 parts1
  • 4 layers124 × 23 mmOctobot controller, the printed circuit board in 3D

    Octobot controller

    Deivid-Negoita/octobot

    An eight-legged walking robot I built end to end: chassis CAD, a 24-servo ATmega32U4 controller board, the firmware, and a browser IK workbench you can drive it from.

    120 parts1MIT
  • 2 layers114.3 × 88.9 mmCrickHit PCB, the printed circuit board in 3D

    CrickHit PCB

    devanshjoshi08/CrickHit

    Real-time cricket batting game on the TI MSPM0G3507 (ARM Cortex-M0+) with triple-ISR architecture, custom KiCad PCB, 5-bit DAC audio, and 3D-printed enclosure. Built for ECE 319H at UT Austin.

    54 parts1
  • 2 layers54.3 × 47.8 mmCerebroPlaca, the printed circuit board in 3D

    CerebroPlaca

    Diego-Luna/Brain

    Brain(Cerebro) es una placa de desarrollo, que cuenta con un EEG (electroencefalograma) que mediante electrodos medimos la actividad cerebral de 12 Hz - 30 Hz, que corresponde a la concentración, con el objetivo de…

    52 parts1GPL-3.0
  • 2 layers145 × 100 mmKinesis board, the printed circuit board in 3D

    Kinesis board

    dodotronix/kinesis_board

    PCB for kinesis advantage keyboard compatible with open source firmware

    52 parts1
  • 4 layersLed panel 4x5, the printed circuit board in 3D

    Led panel 4x5

    Draganito/kicad-mcp

    Mini MCP server that drives a running KiCad 10 PCB editor from Cursor over the official IPC API. LCSC/EasyEDA footprints for JLCPCB.

    238 parts1AGPL-3.0
  • 2 layers55.1 × 38.2 mm1STM, the printed circuit board in 3D

    1STM

    Dxem/Learning-pcb-design

    Im learning pcb design - so everything i do in this repo is open source and you are free to use this designs

    30 parts1Apache-2.0
  • 2 layers127 × 38.1 mmSheRa Sword LEDs, the printed circuit board in 3D

    SheRa Sword LEDs

    emilyanthony4244/She-Ra-Sword-S5

    CAD, 3d Print Files, and Instructions for S5 SheRa sword

    21 parts1CC0-1.0
  • 4 layers82.9 × 53.8 mmESP32 IoT Project, the printed circuit board in 3D

    ESP32 IoT Project

    EngMeesh/ESP32_IoT_Dev_Board

    A custom 4-layer IoT development board based on the ESP32-C3, featuring integrated LiPo battery management, a CP2102N USB-UART bridge, MicroSD support, and onboard environmental/audio sensors for embedded engineering…

    92 parts1MIT
  • 2 layers76.6 × 79.4 mmEIT Multiplexer, the printed circuit board in 3D

    EIT Multiplexer

    ErenErenel/EIT-Multiplexer-PCB

    EE499 Capstone — Low-power 16-channel analog multiplexer PCB for Electrical Impedance Tomography (EIT). RP2040 + ADG1606, KiCad design files.

    62 parts1
  • 4 layers139.6 × 67.9 mmCM5IO, the printed circuit board in 3D

    CM5IO

    EthanWellsSr/BuggyBot

    UHCL senior capstone developing a Raspberry Pi CM5 autonomous car with traffic-sign recognition and sensor integration.

    70 parts1
  • 2 layers348.5 × 142.5 mmKeeb, the printed circuit board in 3D

    Keeb

    FabioCanavarro/MochaDeck

    Full hardware design files for a custom mechanical keyboard. Contains the KiCad schematics, BOMs, and 3D .step files.

    165 parts1
  • 2 layers60.5 × 91.5 mmKicad sailframes e1, the printed circuit board in 3D

    Kicad sailframes e1

    FForzano/xgsail-e1

    Open-hardware ESP32 sailing tracker (E1): GNSS/IMU/wind/pressure logging, ESP-NOW mesh for live fleet position + race-start detection, BLE/WiFi upload. Firmware, KiCad PCB, and a published TypeScript client SDK.

    21 parts1Apache-2.0
  • 2 layers100 × 52.5 mmMk 52 keyboard, the printed circuit board in 3D

    Mk 52 keyboard

    Fyfar/mk_52_keyboard

    KiCAD keyboard layout for MK-52 soviet calculator

    33 parts1CERN-OHL-P-2.0