
Kinesis fkeys
dodotronix/kinesis_board
PCB for kinesis advantage keyboard compatible with open source firmware

PCB for kinesis advantage keyboard compatible with open source firmware
Kinesis board is an open-source printed circuit board by dodotronix, from the dodotronix/kinesis_board repository on GitHub. It is a 2-layer board of 145 × 100 mm with 52 parts on 101 nets, routed with 770 tracks and 101 vias.
It is built around the CRCW120610K0FKEAC, APT3216QBC/D and 2N7002K. Its parts include 16 connectors, 13 resistors, 4 diodes and 1 transistor. It belongs with the keyboards and input boards of this library.
This project is just small redesign of the Tkint board (https://github.com/kinx-project/kint)
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 0R | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R5, R6, R7, R8, R9, R10 |
| 4 | 10K | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R2, R3, R4 |
| 4 | LEDSML1206 | LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | LED1, LED2, LED3, LED4 |
| 3 | R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R11, R12, R13 |
| 1 | 2N7002K | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | A14 | TestPoint:TestPoint_Pad_D2.0mm | TP4 |
| 1 | A15 | TestPoint:TestPoint_Pad_D2.0mm | TP3 |
| 1 | A16 | TestPoint:TestPoint_Pad_D2.0mm | TP2 |
| 1 | A17 | TestPoint:TestPoint_Pad_D2.0mm | TP1 |
| 1 | Buzzer | Buzzer_Beeper:Buzzer_12x9.5RM7.6 | BZ1 |
| 1 | CRX3 | TestPoint:TestPoint_Pad_D2.0mm | TP11 |
| 1 | CS | TestPoint:TestPoint_Pad_D2.0mm | TP5 |
| 1 | CTX3 | TestPoint:TestPoint_Pad_D2.0mm | TP12 |
| 1 | FerriteBead | Inductor_SMD:L_0805_2012Metric_Pad1.05x1.20mm_HandSolder | FB1 |
| 1 | LEFT_13_DOWN | dodo_conn:Molex-39-53-2135 | J10 |
| 1 | LEFT_13_TOP | dodo_conn:Molex-39-53-2135 | J9 |
| 1 | LEFT_1x24 | Connector_PinHeader_2.54mm:PinHeader_1x24_P2.54mm_Vertical | J7 |
| 1 | LEFT_8_TOP | dodo_conn:84953-6 | J12 |
| 1 | MCLK2 | TestPoint:TestPoint_Pad_D2.0mm | TP8 |
| 1 | OUT1B | TestPoint:TestPoint_Pad_D2.0mm | TP13 |
| 1 | REDUCER_THUMB_LEFT_10Pins | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical | J16 |
| 1 | REDUCER_THUMB_LEFT_6Pins | dodo_conn:84953-6 | J15 |
| 1 | REDUCER_THUMB_RIGHT_10Pins | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical | J14 |
| 1 | REDUCER_THUMB_RIGHT_6Pins | dodo_conn:84953-6 | J13 |
| 1 | RIGHT_13_DOWN | dodo_conn:Molex-39-53-2135 | J2 |
| 1 | RIGHT_13_TOP | dodo_conn:Molex-39-53-2135 | J1 |
| 1 | RIGHT_1x24 | Connector_PinHeader_2.54mm:PinHeader_1x24_P2.54mm_Vertical | J8 |
| 1 | RIGHT_8_TOP | dodo_conn:84953-6 | J11 |
| 1 | RX7 | TestPoint:TestPoint_Pad_D2.0mm | TP9 |
| 1 | RX8 | TestPoint:TestPoint_Pad_D2.0mm | TP7 |
| 1 | SOUND | TestPoint:TestPoint_Pad_D2.0mm | TP14 |
| 1 | THUMB_LEFT_6Pins | dodo_conn:84953-6 | J4 |
| 1 | THUMB_LEFT_BAK_KB600 | dodo_conn:Molex-39-53-2135 | J6 |
| 1 | THUMB_RIGHT_6Pins | dodo_conn:84953-6 | J5 |
| 1 | THUMB_RIGHT_SPC_KB600 | dodo_conn:Molex-39-53-2135 | J3 |
| 1 | TX7 | TestPoint:TestPoint_Pad_D2.0mm | TP10 |
| 1 | TX8 | TestPoint:TestPoint_Pad_D2.0mm | TP6 |
| 1 | mounting pad | MountingHole:MountingHole_4.3mm_M4_Pad | H1 |
| 1 | mounting pad | MountingHole:MountingHole_6mm | H2 |

dodotronix/kinesis_board
PCB for kinesis advantage keyboard compatible with open source firmware



bernardopg/ps28-modern-amp
Infinity Primus PS28 amplifier modernization: TPA3255 engineering, validation and safety-gated workflow


Bellafaire/ESP32-Smart-Watch
An open source smartwatch based on the ESP32 compatible with the Arduino IDE.



It measures 145 × 100 mm and has 2 copper layers, 1.6 mm thick.
52 parts, built around the CRCW120610K0FKEAC, APT3216QBC/D and 2N7002K. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the dodotronix/kinesis_board repository on GitHub, at the commit this page was made from: the board is kinesis_board/kinesis_board.kicad_pcb and its schematic kinesis_board/kinesis_board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask dodotronix before reusing the design.