4 layers85 × 85 mm
AVIONICS BOARD
rgw3d/1KCubeSat_Hardware
Hardware design files for my $1000 CubeSat.
181 parts158GPL-3.0
4 layers85 × 85 mm
Hardware design files for my $1000 CubeSat.
- Size
- 85 × 85 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 657
- Nets
- 356
- Pads
- 2,010
- Tracks, vias
- 7,205, 621
- Pours
- 28
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 1 Aug 2020
- Updated
- 3 Jan 2022
Overview
EPS is an open-source printed circuit board by rgw3d, from the rgw3d/1KCubeSat_Hardware repository on GitHub, published under the GPL-3.0 licence. It is a 4-layer board of 85 × 85 mm with 657 parts on 356 nets, routed with 7,205 tracks and 621 vias.
It is built around the 74LVC1G07, SN65HVD230D and TPL5010EVM, with the NCS211RSQ, MP3414AGJ-Z and MR25H10CDF among its other parts. Its parts include 278 resistors, 192 capacitors, 84 ICs, 32 transistors and 19 diodes. It belongs with the STM32 boards of this library.
Main components
10
74LVC1G07
SOT-353-40℃~+105℃ 1 1 1.65V~5.5V 1.6ns@5.5V,50pF 24mA 4uA 74LVC Open-drain Power-off isolation、Level shifting Unidirectional SOT-353 Buffers, Drivers, Receivers, Transceivers ROHSWuxi I-core ElecBuffers, Drivers, Receivers, Transceivers
SN65HVD230D
SOIC-8-40℃~+85℃ 1 17mA 1Mbps 370uA 3V~3.6V CAN Transceiver Low-power mode、Wake-up function、ESD protection、Thermal shutdown protection、Bus fault protection、Hot-swap protection SOIC-8 CAN Transceivers ROHSTexas InstrumentsCAN Transceivers
TPL5010EVM
-ModulesTexas Instruments
NCS211RSQ
SC-88-6-300mV~26V -40℃~+125℃ 0.5uV/℃ 1 125dB 1V/us 2.2V~26V 25kHz 35uV 39uA 40uA 45nV/√Hz@1kHz 500V/V High-side detection、Low-side detection、Bidirectional detection、Zero drift / auto-zero、Input filter、Enable/shutdown function ±30V SC-88-6 Current Sense Amplifiers ROHSonsemiCurrent Sense Amplifiers
MP3414AGJ-Z
TSOT-23-8-40℃~+125℃@(TJ) 1 1.8V~5.5V 1MHz 22uA Adjustable Boost Boost Built-in Yes TSOT-23-8 DC-DC Converters ROHSMonolithic Power SystemsDC-DC Converters
MR25H10CDF
DFN-8-EP(5x6)DFN-8-EP(5x6) Random Access Memory (RAM) ROHSEverspin TechSRAM
FPF2123
SOT-23-5-40℃~+85℃ 1 1.5A 1.8V~5.5V 125mΩ Active High Load Switch Under-voltage lockout、Overcurrent Protection、Over temperature protection、Latch protection、Short-Circuit Protection、Reverse current blocking SOT-23-5 Power Distribution Switches ROHSonsemiPower Distribution Switches
2N7002K
SOT-23-55℃~+150℃ 1 N-channel 1.2Ω@10V、1.4Ω@5V 1.6V 2.9pF 300pC@4.5V 30pF 380mA 4.2pF 540mW 60V SOT-23 MOSFETs ROHSDiodes IncorporatedMOSFETs
ESD9B5.0ST5G
SOD-923(0402)-55℃~+125℃ 1 10V 15pF 5V 8.4V 80W@8/20us 80nA 8A@8/20us Bidirectional ESD IEC 61000-4-2、IEC 61000-4-5 SOD-923(0402) ESD and Surge Protection (TVS/ESD) ROHSTECH PUBLICESD And Surge Protection (TVS/ESD)NUP2105L
SOT-23-55℃~+150℃ 100nA 2 24V 30pF 32V 350W@8/20us 44V 8A@8/20us Bidirectional IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 TVS SOT-23 ESD and Surge Protection (TVS/ESD) ROHSonsemiESD And Surge Protection (TVS/ESD)
README
sun_sensor_test/README.mdSun Sensor Test
Testing out a potential sun sensor using the K857PE 4-Quadrent Photodiode. See the pdf for more information.
See my video on this board for more information.
Parts
657| Qty | Value | Footprint | References |
|---|---|---|---|
| 85 | 0.1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C10, C11, C12, C101, C103, C105, C106, C109, C111, C113, C114, C117, C119, C121, C122, C125 +69 |
| 53 | 0 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R1, R143, R149, R151, R157, R159, R165, R167, R173, R175, R181, R183, R189, R191, R197, R199 +37 |
| 53 | 1M | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R145, R147, R148, R153, R155, R156, R161, R163, R164, R169, R171, R172, R177, R179, R180, R185 +37 |
| 52 | 100K | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R10, R12, R13, R14, R16, R17, R18, R144, R152, R160, R168, R176, R184, R192, R200, R208 +36 |
| 32 | 2N7002K | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q10, Q11, Q12, Q13, Q14, Q15, Q16, Q17, Q18, Q19, Q20, Q21, Q22, Q23 +16 |
| 32 | 4.7uF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C15, C100, C108, C116, C124, C132, C140, C148, C156, C164, C172, C175, C179, C187, C188, C189 +16 |
| 32 | DNP | Capacitor_SMD:C_0603_1608Metric | C102, C104, C110, C112, C118, C120, C126, C128, C134, C136, C142, C144, C150, C152, C158, C160 +16 |
| 22 | 1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C14, C34, C44, C45, C51, C107, C115, C123, C131, C139, C147, C155, C163, C171, C176, C184 +6 |
| 18 | 3.09K | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R100, R102, R104, R106, R112, R114, R116, R118, R124, R126, R128, R130, R136, R138, R140, R142 +2 |
| 18 | DNP | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R150, R158, R166, R174, R182, R190, R198, R206, R214, R222, R230, R238, R246, R254, R262, R270 +2 |
| 18 | FPF2123 | Package_TO_SOT_SMD:SOT-23-5_HandSoldering | U11, U14, U22, U26, U30, U34, U38, U42, U46, U50, U54, U58, U62, U66, U70, U74 +2 |
| 16 | 74LVC1G07 | Package_TO_SOT_SMD:SOT-353_SC-70-5 | U20, U24, U28, U32, U36, U40, U44, U48, U52, U56, U60, U64, U68, U72, U76, U80 |
| 16 | MCP65R46 | Package_TO_SOT_SMD:SOT-23-6 | U21, U25, U29, U33, U37, U41, U45, U49, U53, U57, U61, U65, U69, U73, U77, U81 |
| 16 | NCS211 | Package_TO_SOT_SMD:SOT-363_SC-70-6 | U19, U23, U27, U31, U35, U39, U43, U47, U51, U55, U59, U63, U67, U71, U75, U79 |
| 15 | 0.1 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R93, R95, R96, R107, R108, R109, R110, R119, R120, R121, R122, R131, R132, R133, R134 |
| 12 | 10K | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R11, R48, R62, R64, R66, R67, R74, R76, R78, R79, R97, R98 |
| 12 | TP_1x1 | TestPoint:TestPoint_THTPad_1.0x1.0mm_Drill0.5mm | TP7, TP10, TP11, TP12, TP13, TP14, TP15, TP16, TP17, TP18, TP19, TP20 |
| 11 | 140K | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R101, R103, R105, R123, R125, R127, R129, R135, R137, R139, R141 |
| 10 | 10m | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R2, R3, R4, R7, R49, R53, R54, R55, R56, R328 |
| 8 | NRVB120VLSFT1G | footprint_custom:D_SOD-123FL_handsolder | D10, D11, D12, D13, D14, D15, D16, D17 |
| 7 | TP_smt_1x1 | TestPoint:TestPoint_THTPad_1.0x1.0mm_Drill0.5mm | TP1, TP2, TP3, TP4, TP5, TP8, TP9 |
| 6 | 330 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R24, R25, R26, R27, R28, R329 |
| 6 | 47uF | Capacitor_SMD:C_1210_3225Metric_Pad1.42x2.65mm_HandSolder | C32, C41, C174, C180, C183, C185 |
| 6 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1, J3, J5, J7, J8, J9 |
| 5 | 49.9 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R19, R20, R21, R22, R23 |
| 4 | 1 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R323, R324, R325, R326 |
| 4 | 22nF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C35, C37, C177, C178 |
| 4 | DNP | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C23, C28, C43, C182 |
| 4 | ESD9B5.0ST5G | Diode_SMD:D_SOD-923 | D6, D7, D8, D18 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H2, H3, H4, H5 |
| 4 | TPS270 | Package_TO_SOT_SMD:TSOT-23-6_HandSoldering | U4, U5, U17, U18 |
| 3 | 0.01uF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C1, C2, C13 |
| 3 | DNP | Capacitor_SMD:C_1210_3225Metric_Pad1.42x2.65mm_HandSolder | C42, C181, C186 |
| 3 | LED_SMD_YELLOW | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D3, D4, D5 |
| 2 | 1.5M | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R113, R115 |
| 2 | 150 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R85, R86 |
| 2 | 150K | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R34, R43 |
| 2 | 1K | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R91, R92 |
| 2 | 26.7K | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R61, R73 |
| 2 | 280K | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R69, R81 |
| 2 | 4.7uH | Inductor_SMD:L_Coilcraft_LPS4018 | L1, L2 |
| 2 | 60.4 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R39, R40 |
| 2 | 698K | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R111, R117 |
| 2 | 74LVC1G07 | Package_TO_SOT_SMD:SOT-353_SC-70-5_Handsoldering | U6, U7 |
| 2 | Battery_Cell | footprint_custom:BatteryHolder_Keystone_54_v2_1x18650 | BT1, BT2 |
| 2 | Conn_01x02_Female | Connector_PinHeader_1.27mm:PinHeader_1x02_P1.27mm_Vertical | J2, J4 |
| 2 | LED_SMD_RED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1, D19 |
| 2 | LTC3130-1 | footprint_custom:MSOP-16-1EP_3x4.039mm_P0.5mm_EP1.651x2.845mm_0.3mmThermalVias | U16, U83 |
| 2 | LTC4066 | footprint_custom:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm_0.4mmThermalVias | U9, U12 |
| 2 | MCP65R46 | Package_TO_SOT_SMD:SOT-23-6_Handsoldering | U10, U13 |
| 2 | Polyfuse | Fuse:Fuse_1206_3216Metric_Pad1.42x1.75mm_HandSolder | F1, F2 |
| 2 | TP_1.5x1.5 | TestPoint:TestPoint_THTPad_1.0x1.0mm_Drill0.5mm | TP37, TP39 |
| 2 | Thermistor_NTC | Connector_PinHeader_1.27mm:PinHeader_1x02_P1.27mm_Vertical | TH1, TH2 |
| 1 | 0.039 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R94 |
| 1 | 137K | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R322 |
| 1 | 2.2uH | Inductor_SMD:L_Coilcraft_XAL5030 | L3 |
| 1 | 20K | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R99 |
| 1 | 224K | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R9 |
| 1 | 4.7nF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C39 |
| 1 | 8.85K | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R15 |
| 1 | Conn_01x04_Male | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J13 |
| 1 | Conn_01x05 | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J12 |
| 1 | Conn_02x20_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x20_P2.54mm_Vertical | J6 |
| 1 | Fiducial | Calibration_Scale:Gauge_10mm_Type1_SilkScreenTop | FID4 |
| 1 | LED_SMD_GREEN | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D2 |
| 1 | LOGO | footprint_custom:qrr | G*** |
| 1 | LTC4415 | footprint_custom:MSOP-16-1EP_3x4.039mm_P0.5mm_EP1.651x2.845mm_0.3mmThermalVias | U15 |
| 1 | MP3414A | Package_TO_SOT_SMD:TSOT-23-8_HandSoldering | U84 |
| 1 | MR25H10 | Package_DFN_QFN:DFN-8-1EP_6x5mm_P1.27mm_EP2x2mm | U2 |
| 1 | MountingHole | MountingHole:MountingHole_2.1mm | H1 |
| 1 | NUP2105L | Package_TO_SOT_SMD:SOT-23 | D9 |
| 1 | SN65HVD230 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U8 |
| 1 | STM32L496ZGTx | Package_QFP:LQFP-144_20x20mm_P0.5mm | U1 |
| 1 | SW_DIP_x01 | Button_Switch_SMD:SW_DIP_SPSTx01_Slide_Copal_CHS-01B_W7.62mm_P1.27mm | SW1 |
| 1 | SW_Push | Button_Switch_SMD:SW_SPST_TL3305A | SW2 |
| 1 | TG-3541CE | footprint_custom:Oscillator_SMD_SeikoEpson_TG3541CE-10Pin_3.2x2.5mm_HandSoldering | X1 |
| 1 | TPL5010 | Package_TO_SOT_SMD:SOT-23-6 | U3 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Amphenol_10103594-0001LF_Horizontal | J14 |
More from rgw3d/1KCubeSat_Hardware
2- 2 layers132.7 × 37.3 mm
Sun sensor test
rgw3d/1KCubeSat_Hardware
Hardware design files for my $1000 CubeSat.
178 parts158GPL-3.0
Similar boards
- 4 layers80 × 80 mm
- 4 layers102.8 × 88.4 mm
- 2 layers100 × 50 mm
- 4 layers210 × 120 mm
- 4 layers45.6 × 45.6 mm
- 4 layers80 × 80 mm
- 4 layers89.1 × 92.1 mm
- 2 layers
Suntastic
snorkman88/suntastic
An ultra low-power management board for IoT devices
120 parts13Apache-2.0
Questions
How big is the EPS PCB?
It measures 85 × 85 mm and has 4 copper layers, 1.6 mm thick.
What parts does the EPS use?
657 parts, built around the 74LVC1G07, SN65HVD230D, TPL5010EVM and NCS211RSQ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the EPS KiCad files?
From the rgw3d/1KCubeSat_Hardware repository on GitHub, at the commit this page was made from: the board is eps_board/EPS.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the EPS design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).