4 layers48 × 32 mm
FlatSat
Pwnsat/FlatSat
Flatsat v1.0 is a hardware based platform for aerospace cybersecurity research
106 parts575GPL-2.0
Cubesat
84 boardsKiCad boards from 25 GitHub repositories tagged “cubesat”, the most starred first; open any of them in PCBKit.
- 2 layers77.2 × 69.8 mm
- 4 layers85 × 85 mm
- 4 layers95.9 × 90.2 mm
KENSAT EPS v1.2
kenchangh/kensat
KENSAT, Edge-AI Compute in Orbit - A 2U CubeSat that runs a large language model on-orbit. A power-gated NVIDIA Jetson Orin Nano executes neural-network inference in space, and the results are downlinked over a custom…
218 parts119 - 2 layers16 × 24 mm
- 2 layers82.4 × 89.4 mm
Antenna
ICDT-Inatel-Cubesat-Design-Team/S-Band-Antenna
S-Band RHCP 2.45 GHz Patch Antenna for 1U CubeSats
8 parts11CERN-OHL-W-2.0 - 6 layers80 × 80 mm
- 2 layers
Vhf uhf IQ Modulator
antonjan/IQ_Modulator
IQ Modulator for 2M and 70cm from I2C and ALSA PCM Audio on Orange PI Zero (Estimated TX Power 500mW)
88 parts7GPL-3.0 - 4 layers90 × 74 mm
VERTECS CCB A
ezrafielding/vertecs-ccb
The VERTECS CCB, is an open-source payload interface board leveraging Commercial Off-The-Shelf (COTS) components with a Raspberry Pi Compute Module 4 at its core.
203 parts7CERN-OHL-P-2.0 - 2 layers95.9 × 90.2 mm
- 4 layers81.1 × 75 mm
Brs flight computer
Big-Red-Sat/Big-Red-Sat-1
This repository contains the designs for the Big Red Sat-1, a 1U CubeSat examining the performance of perovskite solar cells in low earth orbit.
266 parts6 - 2 layers96 × 89.9 mm
ATmega SAT
spel-uchile/balloon_experiment
Radiosonde platform to develop, test and integrate payloads for the future CubeSats missions
67 parts6 - 4 layers90.2 × 95.9 mm
TET
ICDT-Inatel-Cubesat-Design-Team/TET-Module
A reliable 1U CubeSat TT&C subsystem featuring an STM32L4 MCU, LoRa radio for long-range communication, CAN Bus, and TMR SPI Flash for critical space applications.
87 parts5CERN-OHL-W-2.0 - 4 layers87.5 × 91.9 mm
- 2 layers100 × 100 mm
- 4 layers90 × 90 mm
RF Board
jbrown3859/EE175-SeniorDesign
CubeSat Flight Computer and Radio - EE175 Senior Design F22
130 parts3 - 2 layers85 × 85 mm
EPS v1
Migsster/StormSat-CubeSat
1U CubeSat avionics prototype with custom OBC/EPS/Payload PCBs, STM32 embedded firmware, LoRa TT&C, GNSS and Python mission analysis.
40 parts3 - 4 layers90 × 90 mm
Sahel pcb
Aliou8/SAHEL-SPECTRA-RF
CubeSat for educational purposes. It is based on an STM32H7 MCU for data handling and uses two CC1125 radios for communication. The software is developed using a Zephyr-like RTOS.
172 parts2GPL-3.0 - 6 layers90.2 × 95.9 mm
Lora payload
dpmj/masters-thesis-lora-gateway-compute-module-cubesat-payload-pcb
Hardware source (KiCad) from my master's thesis in telecommunications engineering at the Polytechnic University of Valencia, 2025.
403 parts2CERN-OHL-S-2.0 - 2 layers86.5 × 92 mm
- 2 layers90 × 70 mm
Wp10 stop control
vehiclewaxberry/Space-Embodied-Robot-Complete
航天服务星具身智能机械臂机器人 | Space Service Robot with Embodied Intelligence — mechanical, electrical & harness, power & thermal, and propulsion hardware design.
107 parts2 - 4 layers90.2 × 95.9 mm
Mainboard v05
alxklso/ISP-cubesat
This is the repo for the Isomer Space Program (ISP) 1U CoyoteSat CubeSat mission.
255 parts1MIT - 4 layers166.3 × 166.3 mm
- 4 layers96 × 89.9 mm
StackBreakoutConnection 4layers V1.0
CameronBrooks11/PC104-Standard-KiCad
PC/104 board schematics and footprints in KiCAD. WARNING: Work-in-progress.
8 partsGPL-3.0