

Nixie clock design
- Size
- 160 × 60 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 126
- Nets
- 176
- Pads
- 540
- Tracks, vias
- 1,543, 303
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 20 Mar 2024
- Updated
- 23 Aug 2024
Overview
Nixie clock design is an open-source printed circuit board by sixteenlines, from the sixteenlines/nixie-clock repository on GitHub. It is a 2-layer board of 160 × 60 mm with 126 parts on 176 nets, routed with 1,543 tracks and 303 vias.
It is built around the ESP-12F, FT232RNL-REEL and HV5122PJ-G, with the LM1117MP-3.3/NOPB, LT3757EMSE and MCP23008-E/SO among its other parts. Its parts include 43 resistors, 29 capacitors, 19 transistors, 11 diodes and 8 ICs. It belongs with the lEDs and displays boards and the ESP8266 boards of this library.
Main components
12ESP-12F
SMD,24x16mm-40℃~+85℃ -96dBm 15dBm 2.4GHz 3.3V 375mA 55mA PCB UART WIFI4 SMD,24x16mm WiFi Modules ROHSDOITWiFi ModulesFT232RNL-REEL
SSOP-28-40℃~+85℃ 15mA 3.3V~5.25V 70uA USB 2.0 USB to UART SSOP-28 USB Converters ROHSFTDIUSB ConvertersHV5122PJ-G
PLCC-44(16.6x16.6)-40℃~+85℃ 1 10.8V~13.2V 100ns@12V,15pF 1200mW 32 8MHz Open-drain Serial-to-Parallel PLCC-44(16.6x16.6) Shift Registers ROHSMicrochip TechnologyShift RegistersLM1117MP-3.3/NOPB
SOT-223-40℃~+125℃@(Tj) 1 1.2V@(800mA) 15V 3.3V 5mA 75dB@(120Hz) 800mA Fixed Over Current Protection、Thermal shutdown Positive SOT-223-4 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsLT3757EMSE
MSOP10Boost, Flyback, SEPIC and Inverting ControllerAnalog DevicesUncategorisedMCP23008-E/SO
SOIC-18-300mil-40℃~+125℃ 1.7MHz 1.8V~5.5V 2uA 3mA 600mV 8 8 8.5mA I2C Interrupt Output Reset function、Cascade and address expansion SOIC-18-300mil I/O Expanders ROHSMicrochip TechnologyI/O ExpandersCMP0603AFX-1002ELF
0603-55℃~+155℃ 10kΩ 250mW 75V Thick Film Resistor ±1% ±100ppm/℃ 0603 Chip Resistor - Surface Mount ROHSBournsChip Resistor - Surface MountMPSA92
TO-921 PNP 1.5W 250nA 300V 40 500mA 500mV 50MHz 5V PNP TO-92 Bipolar (BJT) ROHSFoshan Blue Rocket ElecBipolar (BJT)C0805C225K8PACTU
080510V 2.2uF X5R ±10% 0805 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSKEMETMultilayer Ceramic Capacitors MLCC - SMD/SMTCR1206-FX-3300ELF
1206-55℃~+155℃ 200V 250mW 330Ω Thick Film Resistor ±1% ±100ppm/℃ 1206 Chip Resistor - Surface Mount ROHSBournsChip Resistor - Surface MountRC1206JR-7W330KL
1206-55℃~+155℃ 200V 330kΩ 500mW Thick Film Resistor ±100ppm/℃ ±5% 1206 Chip Resistor - Surface Mount ROHSYAGEOChip Resistor - Surface MountBSS138
SOT-23-55℃~+150℃ 1 N-channel 1.1Ω@10V、1.2Ω@4.5V 1.2V 1.7nC@10V 17.5pF 340mA 350mW 50V 6.5pF N-Channel SOT-23 MOSFETs ROHShongjiachengMOSFETs
Parts
126| Qty | Value | Footprint | References |
|---|---|---|---|
| 14 | 10K | Resistor_SMD:R_0603_1608Metric | R17, R18, R19, R22, R25, R30, R32, R33, R34, R35, R36, R37, R38, R39 |
| 12 | MPSA92 | Package_TO_SOT_THT:TO-92L_Inline_Wide | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8, Q9, Q10, Q11, Q12 |
| 11 | 2.2u | Capacitor_SMD:C_0805_2012Metric | C1, C2, C7, C8, C9, C10, C11, C12, C13, C26, C27 |
| 6 | 300 | Resistor_SMD:R_1206_3216Metric | R7, R8, R9, R10, R11, R12 |
| 6 | 330K | Resistor_SMD:R_1206_3216Metric | R1, R2, R3, R4, R5, R6 |
| 6 | APA-106-F5 | LED_THT:LED_D5.0mm-4_RGB | LED1, LED2, LED3, LED4, LED5, LED6 |
| 6 | IN-8 | nixies-us:IN-8 | N1, N2, N3, N4, N5, N6 |
| 5 | BSS138 | Package_TO_SOT_SMD:SOT-23W | Q13, Q16, Q17, Q18, Q19 |
| 4 | 140K | Resistor_SMD:R_0603_1608Metric | R23, R24, R40, R41 |
| 4 | 47u | Capacitor_SMD:C_1210_3225Metric | C15, C16, C17, C18 |
| 3 | 100n | Capacitor_SMD:C_0603_1608Metric | C3, C4, C6 |
| 3 | 10u | Capacitor_SMD:C_0603_1608Metric | C19, C28, C29 |
| 2 | 100 | Resistor_SMD:R_0603_1608Metric | R14, R15 |
| 2 | 220n | Capacitor_SMD:C_1206_3216Metric | C24, C25 |
| 2 | 4.7k | Resistor_SMD:R_0603_1608Metric | R31, R42 |
| 2 | 5K1 | Resistor_SMD:R_0603_1608Metric | R20, R21 |
| 2 | HV5122 | Package_QFP:PQFP-44_10x10mm_P0.8mm | U1, U2 |
| 2 | LED | LED_SMD:LED_1206_3216Metric | D1, D2 |
| 2 | Neon Lamp | LED_THT:LED_D5.0mm | NE1, NE2 |
| 1 | 0 | Resistor_SMD:R_0603_1608Metric | R43 |
| 1 | 0.02 1W | Resistor_SMD:R_1206_3216Metric | R27 |
| 1 | 100n | Mouser:CAPC1608X90N | C20 |
| 1 | 100p | Capacitor_SMD:C_0603_1608Metric | C21 |
| 1 | 10K | Resistor_SMD:R_1206_3216Metric | R13 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric | R16 |
| 1 | 10n | Capacitor_SMD:C_0603_1608Metric | C23 |
| 1 | 10u | Capacitor_SMD:C_1206_3216Metric | C5 |
| 1 | 1M | Resistor_SMD:R_1206_3216Metric | R28 |
| 1 | 2,2A | Fuse:Fuse_1812_4532Metric_Pad1.30x3.40mm_HandSolder | F1 |
| 1 | 22 | Resistor_SMD:R_0603_1608Metric | R26 |
| 1 | 22n | Capacitor_SMD:C_0603_1608Metric | C22 |
| 1 | 22u | Capacitor_SMD:C_0805_2012Metric | C14 |
| 1 | 63.4K | Resistor_SMD:R_0603_1608Metric | R29 |
| 1 | DA2032-ALD | footprints:SOP250P2197X889-12N | T1 |
| 1 | EG1224 | Button_Switch_THT:SW_E-Switch_EG1224_SPDT_Angled | SW1 |
| 1 | ESP-12F | RF_Module:ESP-12E | U6 |
| 1 | FT232RNL | Package_SO:SSOP-28_5.3x10.2mm_P0.65mm | U4 |
| 1 | IPD50R3K0CE | Package_TO_SOT_SMD:TO-252-2 | Q15 |
| 1 | LM1117MP-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | LT3757EMSE | Package_SO:MSOP-10-1EP_3x3mm_P0.5mm_EP1.68x1.88mm | U7 |
| 1 | MCP23008 | Package_SO:SOIC-18W_7.5x11.6mm_P1.27mm | U5 |
| 1 | NCP1117-12 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U8 |
| 1 | P6SMB6,8A | Diode_SMD:D_SMB | D4 |
| 1 | PRTR5V0U2X | Package_TO_SOT_SMD:SOT-143 | D3 |
| 1 | RFN1LAM6STR | footprints:RFN1LAM6STR | D5 |
| 1 | UMH3N | Package_TO_SOT_SMD:SOT-363_SC-70-6 | Q14 |
| 1 | USB4105-GF-A | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | USB1 |
The 122 most common of 126 parts.
Similar boards
- 2 layers40 × 40 mm

- 2 layers57.9 × 39.9 mm

MCU Link MR
ErichStyger/MCU-Link-MR
Open Source MCU-Link CMSIS-DAP Debug probe for mobile robots (e.g. Pixhawk)
121 parts20MIT - 6 layers172.5 × 120 mm

- 2 layers96 × 90.2 mm

Eps
ngrabbs/ember
Open pvpanel.kicadpro with KiCad 10. The project contains the recovered schematic, routed PCB, project-local footprint libraries, and solar-module STEP model.
77 parts1CC0-1.0 - 2 layers84 × 78 mm

Fabricate Wireless Macropad
Catsarepro21/hackpad_v2
Wireless ESP32-S3 macropad: KiCad PCB, case STEP models, and Gerber/drill fabrication files.
78 parts - 2 layers140 × 140 mm

ABRARACOURCIX main board
GAULAvionique/ABRARACOURCIX_HARD_ware
Le design du hardware qui assurera le contrôle de surface pour le drone prototype.
78 parts - 2 layers128.2 × 61 mm

- 2 layers70.9 × 81.2 mm

Questions
How big is the Nixie clock design PCB?
It measures 160 × 60 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Nixie clock design use?
126 parts, built around the ESP-12F, FT232RNL-REEL, HV5122PJ-G and LM1117MP-3.3/NOPB. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Nixie clock design KiCad files?
From the sixteenlines/nixie-clock repository on GitHub, at the commit this page was made from: the board is nixie_clock_design.kicad_pcb and its schematic logic_psu.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Nixie clock design design in my own project?
Its repository states no licence, so its author keeps all rights: ask sixteenlines before reusing the design.