Skip to the content
123456789101112131415161718

MCP23008-E/SO

Microchip TechnologyExtended

-40℃~+125℃ 1.7MHz 1.8V~5.5V 2uA 3mA 600mV 8 8 8.5mA I2C Interrupt Output Reset function、Cascade and address expansion SOIC-18-300mil I/O Expanders ROHS

Part id
microchip/MCP23008-E/SO
Category
I, O Expanders
Package
SOIC-18-300mil
Pins
18
In stock
292 at JLCPCB (C92253)
Used on
3 open-source boards

Overview

The MCP23008-E/SO is an i, O Expander made by Microchip Technology in a SOIC-18-300mil package with 18 pins. -40℃~+125℃ 1.7MHz 1.8V~5.5V 2uA 3mA 600mV 8 8 8.5mA I2C Interrupt Output Reset function、Cascade and address expansion SOIC-18-300mil I/O Expanders ROHS.

PCBKit's library has its KiCad symbol (Analog & Interface:MCP23008-E/SO, from CERN's library) and its footprint (Package_SO:SOIC-18W_7.5x11.6mm_P1.27mm, from KiCad's library), ready for a KiCad board. 292 are in stock at JLCPCB (part C92253). 3 open-source boards in 3 repositories on GitHub use it.

Symbol

1SCK2SDA3A24A15A06RESET8INT18VDD9VSS17GP716GP615GP514GP413GP312GP211GP110GP07NC
Analog & Interface:MCP23008-E/SOFrom CERN's library

Footprint

123456789101112131415161718
Package_SO:SOIC-18W_7.5x11.6mm_P1.27mmFrom KiCad's library

From the datasheet

8
Supply, least
4.5 V · VDD, recommended operating min, E-Temp · p. 24
Supply, most
5.5 V · VDD, recommended operating max, E-Temp · p. 24
Supply, absolute maximum
5.5 V · VDD, absolute max relative to VSS · p. 23
Works from
-40 °C · Ambient operating min, E-Temp · p. 24
Works up to
125 °C · Ambient operating max, E-Temp · p. 24
Takes working
1 mA · VDD supply current max, SCL = 1 MHz · p. 24
Takes asleep
2 µA · VDD standby current max, 4.5–5.5 V at +125°C · p. 24
A pin gives at most
25 mA · Any output pin sink current absolute max · p. 23

What it is and has

4
GPIO
8-bit remote bidirectional I/O port · p. 1
Interface
I2C; three hardware address pins · p. 5
External reset
External reset input · p. 1
SOIC package
18-pin SOIC (300 mil) · p. 1

Specifications

25
ParameterConditionsAs printedPage
Ambient temperature under biasmin -40 · max 125 °C23
Storage temperaturemin -65 · max 150 °C23
Voltage on VDD with respect to VSSmin -0.3 · max 5.5 V23
Voltage on all other pins with respect to VSS (except VDD)Upper limit: VDD + 0.6Vmin -0.6 V23
Total power dissipation (Note)max 700 mW23
Maximum current out of VSS pinmax 150 mA23
Maximum current into VDD pinmax 125 mA23
Input clamp current IIKVI < 0 or VI > VDD; ±20 mAmax 20 mA23
Output clamp current IOKVO < 0 or VO > VDD; ±20 mAmax 20 mA23
Maximum output current sunk by any output pinmax 25 mA23
Maximum output current sourced by any output pinmax 25 mA23
Supply Voltage VDDD001; E-Temp operating conditions additionally require VDD ≥ 4.5V.min 1.8 · max 5.5 V24
VDD Rise Rate to Ensure Power-on Reset SVDDD003; design guidance only, not tested.min 0.05 V/ms24
Supply Current IDDD004; SCL/SCK = 1 MHzmax 1 mA24
Standby current IDDSD005; unless otherwise indicatedmax 1 uA24
Standby current IDDS4.5V - 5.5V @ +125°C; characterized, not 100% tested.max 2 uA24
Input Leakage Current I/O port pins IILD060; VSS ≤ VPIN ≤ VDD; maximum magnitude ±1 uAmax 1 uA24
Output Leakage Current I/O port pins ILOD065; VSS ≤ VPIN ≤ VDD; maximum magnitude ±1 uAmax 1 uA24
GPIO weak pull-up current IPUD070; VDD = 5V, GP Pins = VSS; –40°C ≤ TA ≤ +85°Cmin 40 · typ 75 · max 115 uA24
Output Low-Voltage GPIO VOLD080; IOL = 8.5 mA, VDD = 4.5Vmax 0.6 V24
Output Low-Voltage INT VOLIOL = 1.6 mA, VDD = 4.5Vmax 0.6 V24
Output Low-Voltage SO, SDA VOLSDA for MCP23008; IOL = 3.0 mA, VDD = 1.8Vmax 0.6 V24
Output Low-Voltage SDA VOLIOL = 3.0 mA, VDD = 4.5Vmax 0.8 V24
Capacitive Loading Specs on Output Pins GPIO, SO, INT CIOD101; GPIO, INT for MCP23008max 50 pF24
Capacitive Loading Specs on Output Pins SDA CBD102max 400 pF24

Pins, by the datasheet

18
1 SCL/SCK
Serial clock input; SCL for MCP23008. · p. 5
2 SDA/SI
Serial data I/O for MCP23008. · p. 5
3 A2/SO
Hardware address input A2 for MCP23008; must be biased externally. · p. 5
4 A1
Hardware address input; must be biased externally. · p. 5
5 A0
Hardware address input; must be biased externally. · p. 5
6 RESET
External reset input; must be biased externally. · p. 5
7 NC/CS
No connect for MCP23008. · p. 5
8 INT
Interrupt output configurable as active-high, active-low or open-drain. · p. 5
9 VSS
Ground. · p. 5
10 GP0
Bidirectional I/O with optional interrupt-on-change and internal weak pull-up resistor. · p. 5
11 GP1
Bidirectional I/O with optional interrupt-on-change and internal weak pull-up resistor. · p. 5
12 GP2
Bidirectional I/O with optional interrupt-on-change and internal weak pull-up resistor. · p. 5
13 GP3
Bidirectional I/O with optional interrupt-on-change and internal weak pull-up resistor. · p. 5
14 GP4
Bidirectional I/O with optional interrupt-on-change and internal weak pull-up resistor. · p. 5
15 GP5
Bidirectional I/O with optional interrupt-on-change and internal weak pull-up resistor. · p. 5
16 GP6
Bidirectional I/O with optional interrupt-on-change and internal weak pull-up resistor. · p. 5
17 GP7
Bidirectional I/O with optional interrupt-on-change and internal weak pull-up resistor. · p. 5
18 VDD
Power. · p. 5

Open-source boards using it

3

Parts like it

7

Questions

Is there a KiCad symbol and footprint for the MCP23008-E/SO?

Yes. The symbol is Analog & Interface:MCP23008-E/SO and the footprint Package_SO:SOIC-18W_7.5x11.6mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the MCP23008-E/SO?

SOIC-18-300mil, with 18 pins. Its footprint is drawn on this page.

Where is the MCP23008-E/SO datasheet?

Microchip Technology publishes it: the Datasheet link on this page opens it.

Where can I order the MCP23008-E/SO?

JLCPCB lists it as part C92253, with 292 in stock; the sellers' links on this page open their listings.

What can replace the MCP23008-E/SO?

Parts like it in the library: the MCP23017-E/SS by Microchip Technology, the MCP23017-E/SO by Microchip Technology, the MCP23008-E/SS by Microchip Technology and the MCP23008-E/ML by Microchip Technology. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the MCP23008-E/SO?

3 boards in 3 repositories on GitHub; the most starred are listed on this page, with their KiCad files.