Skip to the content
123456789101112131415161718

MCP23008-E/P

Microchip TechnologyExtended

-40℃~+125℃ 1.7MHz 1.8V~5.5V 1uA 600mV 8 8 8.5mA I2C Interrupt Output Reset function、Cascade and address expansion PDIP-18 I/O Expanders ROHS

Part id
microchip/MCP23008-E/P
Category
I, O Expanders
Package
PDIP-18
Pins
18
In stock
91 at JLCPCB (C646745)
Used on
36 open-source boards

Overview

The MCP23008-E/P is an i, O Expander made by Microchip Technology in a PDIP-18 package with 18 pins. -40℃~+125℃ 1.7MHz 1.8V~5.5V 1uA 600mV 8 8 8.5mA I2C Interrupt Output Reset function、Cascade and address expansion PDIP-18 I/O Expanders ROHS.

PCBKit's library has its KiCad symbol (dk_Interface-I-O-Expanders:MCP23008-E_P, from Digikey) and its footprint (Package_DIP:DIP-18_W7.62mm, from KiCad's library), ready for a KiCad board. 91 are in stock at JLCPCB (part C646745). 36 open-source boards in 29 repositories on GitHub use it.

Symbol

1SCL2SDA3A24A15A06RESET7NC8INT9VSS10GP011GP112GP213GP314GP415GP516GP617GP718VDD
dk_Interface-I-O-Expanders:MCP23008-E_PFrom Digikey

Footprint

123456789101112131415161718
Package_DIP:DIP-18_W7.62mmFrom KiCad's library

Pinout

18
The pins of the MCP23008-E/P
PinNameType
1SCLInput
2SDAInput/output
3A2Input
4A1Input
5A0Input
6RESETInput
7NCNot connected
8INTOutput
9VSSPower in
10GP0Input/output
11GP1Input/output
12GP2Input/output
13GP3Input/output
14GP4Input/output
15GP5Input/output
16GP6Input/output
17GP7Input/output
18VDDPower in

Open-source boards using it

36See all 36
  • 2 layers105.5 × 27 mmPanel board, the printed circuit board in 3D

    Panel board

    nategri/chernobyl_dice

    A quantum random number generator with a Cold War aesthetic.

    19 parts196MIT
  • 4 layers150 × 100 mmHL2-MRF101, the printed circuit board in 3D

    HL2-MRF101

    mathisschmieder/HL2-MRF101

    Hermes-Lite2 Power Amplifier/Filter board using MRF-101

    219 parts29
  • 4 layers85 × 56 mmRadioberry LPF V1.3, the printed circuit board in 3D

    Radioberry LPF V1.3

    pa3gsb/Radioberry-2.x-extensions

    Hardware extensions to the Radioberry Ham Radio

    116 parts24
  • 2 layers140 × 72.5 mmNixie proj, the printed circuit board in 3D

    Nixie proj

    dm2lct/Nixieclock_kit

    This is a Nixie-clock controlled by a ESP8266 module with NTP and MQTT support.

    119 parts9GPL-3.0
  • 4 layers101.6 × 141.7 mmPiPtr, the printed circuit board in 3D

    PiPtr

    jmlzone/PiPtr

    Repeater controller

    388 parts8
  • 2 layers329.4 × 97.5 mmAlpacaboard schem v0.2, the printed circuit board in 3D

    Alpacaboard schem v0.2

    Sheepybloke2-0/alpacaboard

    An Open Source keyboard designed for Kailh Low Profile Switches

    145 parts5
  • 2 layers279.4 × 137.2 mmHMS Olfactometer, the printed circuit board in 3D

    HMS Olfactometer

    HMS-RIC/HMS-Olfactometer

    51 Channel Olfactometer

    78 parts4MIT

Parts like it

7

Questions

Is there a KiCad symbol and footprint for the MCP23008-E/P?

Yes. The symbol is dk_Interface-I-O-Expanders:MCP23008-E_P and the footprint Package_DIP:DIP-18_W7.62mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the MCP23008-E/P?

PDIP-18, with 18 pins. Its footprint is drawn on this page.

Where is the MCP23008-E/P datasheet?

Microchip Technology publishes it: the Datasheet link on this page opens it.

Where can I order the MCP23008-E/P?

JLCPCB lists it as part C646745, with 91 in stock; the sellers' links on this page open their listings.

What can replace the MCP23008-E/P?

Parts like it in the library: the MCP23017-E/SS by Microchip Technology, the MCP23017-E/SO by Microchip Technology, the MCP23008-E/SS by Microchip Technology and the MCP23008-E/ML by Microchip Technology. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the MCP23008-E/P?

36 boards in 29 repositories on GitHub; the most starred are listed on this page, with their KiCad files.