Skip to the content
2 layers329.4 × 97.5 mmAlpacaboard schem v0.2, the printed circuit board in 3D

Alpacaboard schem v0.2

Sheepybloke2-0/alpacaboard5

An Open Source keyboard designed for Kailh Low Profile Switches

Size
329.4 × 97.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
145
Nets
105
Pads
870
Tracks, vias
847, 5
Pours
2
Routed
Yes
KiCad
KiCad 4
Created
7 Jun 2018
Updated
11 Jun 2018

Overview

Alpacaboard schem v0.2 is an open-source printed circuit board by Sheepybloke2-0, from the Sheepybloke2-0/alpacaboard repository on GitHub. It is a 2-layer board of 329.4 × 97.5 mm with 145 parts on 105 nets, routed with 847 tracks and 5 vias.

It is built around the MCP23008-E/P. Its parts include 68 switches, 67 diodes, 2 connectors, 1 resistor and 1 IC. It belongs with the keyboards and input boards of this library.

Main components

1

README

README.md

Alpaca-board

An Open Source keyboard designed for Kailh Low Profile Switches.

This keyboard is meant to be ultra portable, using the Kailh Low Profile switches and a minimalist design. That being said, I wanted to add all the keys that I miss when typing on my 40% and 60% boards, such as arrow keys, Home, End, Delete, Up and Down. I also decided to use USB C as the connector, since I perfer the form factor and flexablility for future designs. The keyboard will be fully customizable through QMK, the software of which will be coming up soon.

Goals

  • Be portable yet useful
  • Have RGB underglow, maybe backlighting?
  • Try out different PCB and key layouts for something new and exciting
  • Utilize current Kailh Low Profile switches and keycaps
  • Add Bluetooth capablilities!

Software and Tools

Schematic and PCB design was done in KiCAD. Because I'm lazy, the routing was done by Freerouting.

References

Version 0.2

After making the schematic and layout for V0.1, I decided to change the components to thru-hole and use a micro-controller for easier soldering and assembly. The other reason is because of the Featherwing ATMega32u4 with BLE support. This has a handle LiPo charging circuit and BLE support for most devices, specifically mobile. For some computers a converter may be needed. However, in order to make this work, I had to add a GPIO expander, since most of the pins on the Featherwing are needed for other functions, such as the Bluetooth and charging. The expander talks via I2C and is addressed at 000. This expander also allows for the RGB underglow I wanted to include. Now, it's on to fabrication and software!

License

I hope that by keeping this project Open Source, other designers can use my work as a base to get up and running quickly. Feel free to use my notes and ideas, but please adhere to the Open Hardware License.

Enjoy!

Parts

145
QtyValueFootprintReferences
67DDiodes_THT:D_DO-35_SOD27_P7.62mm_HorizontalD1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D23, D24 +51
5MountingHole_2.2mm_M2_PadMounting_Holes:MountingHole_2.2mm_M2_PadMount0, Mount1, Mount2, Mount3, Mount4
1470Resistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR1
1Conn_01x03_FemaleSocket_Strips:Socket_Strip_Straight_1x03_Pitch2.54mmJ2
1Conn_02x03_Odd_EvenPin_Headers:Pin_Header_Angled_2x03_Pitch2.00mmJ1
1FEATHERWINGfootprints:PCB_FeatherWingMS1
1MCP23008Housings_DIP:DIP-18_W7.62mm_SocketU1
1SW_0footprints:Kailh-PG1350-1u-reversible-flipSW9
1SW_1footprints:Kailh-PG1350-1u-reversible-flipSW16
1SW_2footprints:Kailh-PG1350-1u-reversible-flipSW24
1SW_3footprints:Kailh-PG1350-1u-reversible-flipSW32
1SW_4footprints:Kailh-PG1350-1u-reversible-flipSW40
1SW_5footprints:Kailh-PG1350-1u-reversible-flipSW47
1SW_6footprints:Kailh-PG1350-1u-reversible-flipSW54
1SW_7footprints:Kailh-PG1350-1u-reversible-flipSW61
1SW_8footprints:Kailh-PG1350-1u-reversible-flipSW67
1SW_9footprints:Kailh-PG1350-1u-reversible-flipSW1
1SW_Afootprints:Kailh-PG1350-1u-reversible-flipSW12
1SW_Bfootprints:Kailh-PG1350-1u-reversible-flipSW45
1SW_BSlashfootprints:Kailh-PG1350-1u-reversible-flipSW27
1SW_Backfootprints:Kailh-PG1350-1u-reversible-flipSW33
1SW_Cfootprints:Kailh-PG1350-1u-reversible-flipSW29
1SW_Capsfootprints:Kailh-PG1350-1u-reversible-flipSW4
1SW_Commafootprints:Kailh-PG1350-1u-reversible-flipSW65
1SW_Dfootprints:Kailh-PG1350-1u-reversible-flipSW28
1SW_Delfootprints:Kailh-PG1350-1u-reversible-flipSW41
1SW_Downfootprints:Kailh-PG1350-1u-reversible-flipSW60
1SW_Efootprints:Kailh-PG1350-1u-reversible-flipSW69
1SW_ESCfootprints:Kailh-PG1350-1u-reversible-flipSW8
1SW_Endfootprints:Kailh-PG1350-1u-reversible-flipSW55
1SW_Enterfootprints:Kailh-PG1350-1u-reversible-flipSW57
1SW_Ffootprints:Kailh-PG1350-1u-reversible-flipSW36
1SW_FNfootprints:Kailh-PG1350-1u-reversible-flipSW38
1SW_FSlashfootprints:Kailh-PG1350-1u-reversible-flipSW14
1SW_Gfootprints:Kailh-PG1350-1u-reversible-flipSW44
1SW_Hfootprints:Kailh-PG1350-1u-reversible-flipSW51
1SW_Homefootprints:Kailh-PG1350-1u-reversible-flipSW48
1SW_Ifootprints:Kailh-PG1350-1u-reversible-flipSW56
1SW_Jfootprints:Kailh-PG1350-1u-reversible-flipSW58
1SW_Kfootprints:Kailh-PG1350-1u-reversible-flipSW64
1SW_Lfootprints:Kailh-PG1350-1u-reversible-flipSW35
1SW_LAltfootprints:Kailh-PG1350-1u-reversible-flipSW23
1SW_LBrackfootprints:Kailh-PG1350-1u-reversible-flipSW11
1SW_LCtlfootprints:Kailh-PG1350-1u-reversible-flipSW7
1SW_LShiftfootprints:Kailh-PG1350-1u-reversible-flipSW5
1SW_Leftfootprints:Kailh-PG1350-1u-reversible-flipSW53
1SW_Mfootprints:Kailh-PG1350-1u-reversible-flipSW59
1SW_Metafootprints:Kailh-PG1350-1u-reversible-flipSW15
1SW_Minusfootprints:Kailh-PG1350-1u-reversible-flipSW17
1SW_Nfootprints:Kailh-PG1350-1u-reversible-flipSW52
1SW_Ofootprints:Kailh-PG1350-1u-reversible-flipSW62
1SW_Pfootprints:Kailh-PG1350-1u-reversible-flipSW3
1SW_Periodfootprints:Kailh-PG1350-1u-reversible-flipSW6
1SW_Plusfootprints:Kailh-PG1350-1u-reversible-flipSW25
1SW_PushButtons_Switches_THT:SW_PUSH_6mmSW22
1SW_Qfootprints:Kailh-PG1350-1u-reversible-flipSW10
1SW_Quotefootprints:Kailh-PG1350-1u-reversible-flipSW50
1SW_Rfootprints:Kailh-PG1350-1u-reversible-flipSW26
1SW_RAltfootprints:Kailh-PG1350-1u-reversible-flipSW39
1SW_RBrackfootprints:Kailh-PG1350-1u-reversible-flipSW19
1SW_RCtlfootprints:Kailh-PG1350-1u-reversible-flipSW46
1SW_RShiftfootprints:Kailh-PG1350-1u-reversible-flipSW63
1SW_Rightfootprints:Kailh-PG1350-1u-reversible-flipSW66
1SW_Sfootprints:Kailh-PG1350-1u-reversible-flipSW20
1SW_SColonfootprints:Kailh-PG1350-1u-reversible-flipSW43
1SW_Spacefootprints:Kailh-PG1350-1u-reversible-flipSW31
1SW_Tfootprints:Kailh-PG1350-1u-reversible-flipSW34
1SW_Tabfootprints:Kailh-PG1350-1u-reversible-flipSW2
1SW_Ufootprints:Kailh-PG1350-1u-reversible-flipSW49
1SW_Upfootprints:Kailh-PG1350-1u-reversible-flipSW30
1SW_Vfootprints:Kailh-PG1350-1u-reversible-flipSW37
1SW_Wfootprints:Kailh-PG1350-1u-reversible-flipSW18
1SW_Xfootprints:Kailh-PG1350-1u-reversible-flipSW21
1SW_Yfootprints:Kailh-PG1350-1u-reversible-flipSW42
1SW_Zfootprints:Kailh-PG1350-1u-reversible-flipSW13

Similar boards

  • 2 layers105.5 × 27 mmPanel board, the printed circuit board in 3D

    Panel board

    nategri/chernobyl_dice

    A quantum random number generator with a Cold War aesthetic.

    19 parts196MIT
  • 4 layers150 × 100 mmHL2-MRF101, the printed circuit board in 3D

    HL2-MRF101

    mathisschmieder/HL2-MRF101

    Hermes-Lite2 Power Amplifier/Filter board using MRF-101

    219 parts29
  • 4 layers85 × 56 mmRadioberry LPF V1.3, the printed circuit board in 3D

    Radioberry LPF V1.3

    pa3gsb/Radioberry-2.x-extensions

    Hardware extensions to the Radioberry Ham Radio

    116 parts24
  • 2 layers140 × 72.5 mmNixie proj, the printed circuit board in 3D

    Nixie proj

    dm2lct/Nixieclock_kit

    This is a Nixie-clock controlled by a ESP8266 module with NTP and MQTT support.

    119 parts9GPL-3.0
  • 4 layers101.6 × 141.7 mmPiPtr, the printed circuit board in 3D

    PiPtr

    jmlzone/PiPtr

    Repeater controller

    388 parts8
  • 2 layers279.4 × 137.2 mmHMS Olfactometer, the printed circuit board in 3D

    HMS Olfactometer

    HMS-RIC/HMS-Olfactometer

    51 Channel Olfactometer

    78 parts4MIT
  • 2 layers82.1 × 47.9 mmESP multi board, the printed circuit board in 3D

    ESP multi board

    CRM-UAM/ESP_Multi_Board

    IR values cm - val 0 - 216 2 - 130 3 - 92 4 - 73 5 - 53 6 - 40 7 - 34 10 - 21

    45 parts2

Questions

How big is the Alpacaboard schem v0.2 PCB?

It measures 329.4 × 97.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Alpacaboard schem v0.2 use?

145 parts, built around the MCP23008-E/P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Alpacaboard schem v0.2 KiCad files?

From the Sheepybloke2-0/alpacaboard repository on GitHub, at the commit this page was made from: the board is alpacaboard_schem_v0.2.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Alpacaboard schem v0.2 design in my own project?

Its repository states no licence, so its author keeps all rights: ask Sheepybloke2-0 before reusing the design.