
ESP multi board cuadrada
CRM-UAM/ESP_Multi_Board
IR values cm - val 0 - 216 2 - 130 3 - 92 4 - 73 5 - 53 6 - 40 7 - 34 10 - 21

IR values cm - val 0 - 216 2 - 130 3 - 92 4 - 73 5 - 53 6 - 40 7 - 34 10 - 21
ESP multi board is an open-source printed circuit board by CRM-UAM, from the CRM-UAM/ESP_Multi_Board repository on GitHub. It is a 2-layer board of 82.1 × 47.9 mm with 45 parts on 42 nets, routed with 706 tracks and 53 vias.
It is built around the MAX11605EEE+, LD1117S33TR(MS) and MCP23008-E/P. Its parts include 9 connectors, 8 diodes, 7 resistors, 5 ICs and 4 capacitors. It belongs with the ESP8266 boards of this library.
Diseño de una nueva placa basada en el módulo ESP8266 con conextividad WIFI y extensión para soportar dos motores DC, 8 GPIO digitales (MCP23008), 12 entradas Análogicas (MAX11605EEE+), giroscopio y acelerómetro (MPU6050)
ESP Multi Boards
 SMD boards can be soldered using an iron and low-temp solder paste (a.k.a. "¡soldadas con el método de la plancha!")
##Librerias
IR values cm - val 0 - 216 2 - 130 3 - 92 4 - 73 5 - 53 6 - 40 7 - 34 10 - 21
 Testing the components before sending the PCB out for manufacture
Víctor Uceda & Carlos García
Club de Robótica-Mecatrónica, Universidad Autónoma de Madrid (CRM-UAM)
http://crm.ii.uam.es
License: Attribution - Share Alike - Creative Commons (http://creativecommons.org/licenses/by-sa/4.0/)
This hardware/software is provided "as is", and you use the hardware/software at your own risk. Under no circumstances shall any author be liable for direct, indirect, special, incidental, or consequential damages resulting from the use, misuse, or inability to use this hardware/software, even if the authors have been advised of the possibility of such damages.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 1pin | Connect:1pin | drill3, drill4, drill7, drill8, drill8, drill8, drill9, drill11, drill14, drill20 |
| 8 | D | diodos_smd:SMD_D_SMA-Sub-2 | D102, D103, D104, D105, D106, D107, D108, D109 |
| 3 | 10k | Resistors_SMD:R_0805_HandSoldering | R101, R102, R103 |
| 3 | CONN_01X06 | Pin_Headers:Pin_Header_Straight_1x06 | P102, P104, P105 |
| 2 | 0.5 | Resistors_SMD:R_1206 | R106, R107 |
| 2 | 10u | Capacitors_SMD:C_1206 | C1, C101 |
| 2 | 4.7k | Resistors_SMD:R_0805_HandSoldering | R104, R105 |
| 2 | CONN_01X02 | Pin_Headers:Pin_Header_Angled_1x02 | P101, P103 |
| 1 | 0.1u | Capacitors_SMD:C_0805_HandSoldering | C102 |
| 1 | 100n | Capacitors_SMD:C_0805_HandSoldering | C2 |
| 1 | CONN_01X03 | Pin_Headers:Pin_Header_Straight_1x03 | P106 |
| 1 | CONN_01X05 | Pin_Headers:Pin_Header_Straight_1x05 | P109 |
| 1 | CONN_I2C_MPU6050 | Socket_Strips:Socket_Strip_Straight_1x08 | P107 |
| 1 | CONN_PINES_DIG | Pin_Headers:Pin_Header_Straight_1x06 | P108 |
| 1 | ESP-12 | ESP8266:ESP-12 | U102 |
| 1 | L298 | TO_SOT_Packages_THT:Multiwatt_15_Vertical | IC101 |
| 1 | LD1117S33TR | TO_SOT_Packages_SMD:SOT-223 | U1 |
| 1 | MAX11605EEE+ | Housings_SSOP:SSOP-16_3.9x4.9mm_Pitch0.635mm | U103 |
| 1 | MCP23008 | Housings_SOIC:SOIC-18_7.5x11.6mm_Pitch1.27mm | U104 |
| 1 | SWITCH_INV | switch:switch_power_custom | SW102 |
| 1 | SW_PUSH_SMALL | Buttons_Switches_SMD:SW_SPST_EVPBF | SW101 |

CRM-UAM/ESP_Multi_Board
IR values cm - val 0 - 216 2 - 130 3 - 92 4 - 73 5 - 53 6 - 40 7 - 34 10 - 21

nategri/chernobyl_dice
A quantum random number generator with a Cold War aesthetic.

mathisschmieder/HL2-MRF101
Hermes-Lite2 Power Amplifier/Filter board using MRF-101

pa3gsb/Radioberry-2.x-extensions
Hardware extensions to the Radioberry Ham Radio

dm2lct/tlnixie
PCB files for the Turmlabor nixie clock 2.0

dm2lct/Nixieclock_kit
This is a Nixie-clock controlled by a ESP8266 module with NTP and MQTT support.


Sheepybloke2-0/alpacaboard
An Open Source keyboard designed for Kailh Low Profile Switches

It measures 82.1 × 47.9 mm and has 2 copper layers, 1.6 mm thick.
45 parts, built around the MAX11605EEE+, LD1117S33TR(MS) and MCP23008-E/P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the CRM-UAM/ESP_Multi_Board repository on GitHub, at the commit this page was made from: the board is ESP_multi_board.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask CRM-UAM before reusing the design.