
Ferris
pierrechevalier83/ferris
A low profile split keyboard designed to satisfy one single use case elegantly
Microchip TechnologyExtended
-40℃~+85℃ 1.7MHz 1.8V~5.5V 16 1uA 600mV 8 8mA I2C Interrupt Output Reset function、Cascade and address expansion SOIC-28-300mil I/O Expanders ROHS
The MCP23017-E/SO is an i, O Expander made by Microchip Technology in a SOIC-28-300mil package with 28 pins. -40℃~+85℃ 1.7MHz 1.8V~5.5V 16 1uA 600mV 8 8mA I2C Interrupt Output Reset function、Cascade and address expansion SOIC-28-300mil I/O Expanders ROHS.
PCBKit's library has its KiCad symbol (Analog & Interface:MCP23017-E/SO, from CERN's library) and its footprint (Package_SO:SOIC-28W_7.5x17.9mm_P1.27mm, from KiCad's library), ready for a KiCad board. 1,398 are in stock at JLCPCB (part C47023). 39 open-source boards in 29 repositories on GitHub use it.
| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| Ambient temperature under bias | min -40 · max 125 °C | 3 | |
| Storage temperature | min -65 · max 150 °C | 3 | |
| Voltage on VDD with respect to VSS | min -0.3 · max 5.5 V | 3 | |
| Voltage on all other pins with respect to VSS (except VDD) | min -0.6 V | 3 | |
| Total power dissipation | max 700 mW | 3 | |
| Maximum current out of VSS pin | max 150 mA | 3 | |
| Maximum current into VDD pin | max 125 mA | 3 | |
| Input clamp current IIK | VI < 0 or VI > VDD | min -20 · max 20 mA | 3 |
| Output clamp current IOK | VO < 0 or VO > VDD | min -20 · max 20 mA | 3 |
| Maximum output current sunk by any output pin | max 25 mA | 3 | |
| Maximum output current sourced by any output pin | max 25 mA | 3 | |
| ESD protection on all pins (HBM:MM) | HBM | max 4 kV | 3 |
| ESD protection on all pins (HBM:MM) | MM | max 400 V | 3 |
| Supply Voltage VDD | min 1.8 · max 5.5 V | 4 | |
| VDD Rise Rate to ensure Power-on Reset SVDD | Design guidance only. Not tested. | min 0.05 V/ms | 4 |
| Supply Current IDD | SCL/SCK = 1 MHz | max 1 mA | 4 |
| Standby current IDDS8 | –40°C ≤ TA ≤ +85°C | max 1 uA | 4 |
| Standby current IDDS8 | 4.5V ≤ VDD ≤ 5.5V; +85°C ≤ TA ≤ +125°C; Note 1 | max 3 uA | 4 |
| GPIO weak pull-up current IPU | VDD = 5V; GP pins = VSS | min 40 · typ 75 · max 115 uA | 4 |
| GPIO VOL | Output Low-Voltage; IOL = 8.0 mA; VDD = 4.5V | max 0.6 V | 4 |
| INT VOL | Output Low-Voltage; IOL = 1.6 mA; VDD = 4.5V | max 0.6 V | 4 |
| SO, SDA VOL | Output Low-Voltage; SDA for MCP23017; IOL = 3.0 mA; VDD = 1.8V | max 0.6 V | 4 |
| SDA VOL | Output Low-Voltage; IOL = 3.0 mA; VDD = 4.5V | max 0.8 V | 4 |
| GPIO, SO, INT CIO | Capacitive Loading Specs on Output Pins; GPIO, INT for MCP23017 | max 50 pF | 4 |
| SDA CB | Capacitive Loading Specs on Output Pins | max 400 pF | 4 |
| RESET Pulse Width (Low) TRSTL | min 1 us | 5 | |
| Device Active After Reset high THLD | VDD = 5.0V | typ 0 ns | 5 |
| Output High-Impedance From RESET Low TIOZ | max 1 us | 5 |

pierrechevalier83/ferris
A low profile split keyboard designed to satisfy one single use case elegantly


BrownSpaceEngineering/PVDX-ADCS-PMB
Avionics files related to ADCS and Perovskite schematics, pcb design, and documentation



techie66/EngineDataLogger-EngineData
Arduino code for SleepyPi that is attached to main datalogger. Reads engine sensors.

techie66/EngineDataLogger-FrontControls
Arduino code for front controls device.

wubneh/MCTR260-pico-firmware
Raspberry Pi Pico W robot controller firmware for MCTR 260 Mechatronics Design. Dual-core BLE architecture with mecanum drive, stepper/DC motor support, and configurable motion profiles.
Yes. The symbol is Analog & Interface:MCP23017-E/SO and the footprint Package_SO:SOIC-28W_7.5x17.9mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
SOIC-28-300mil, with 28 pins. Its footprint is drawn on this page.
Microchip Technology publishes it: the Datasheet link on this page opens it.
JLCPCB lists it as part C47023, with 1,398 in stock; the sellers' links on this page open their listings.
Parts like it in the library: the MCP23017-E/SS by Microchip Technology, the MCP23008-E/SS by Microchip Technology, the MCP23008-E/ML by Microchip Technology and the MCP23017-E/SP by Microchip Technology. Check their datasheets: a part that fits the footprint may still differ in its ratings.
39 boards in 29 repositories on GitHub; the most starred are listed on this page, with their KiCad files.