tdarcher/moistureiq_PCBMoistureiq PCB is an open-source printed circuit board by tdarcher, from the tdarcher/moistureiq_PCB repository on GitHub. It is a 2-layer board of 128.2 × 61 mm with 109 parts on 113 nets, routed with 890 tracks and 367 vias.
It is built around the LM66100DCK, RC0603JR-0710KL and EMK212BJ106KG-T, with the ESR03EZPF1000, MBR0530 and CC0805KRX7R9BB104 among its other parts. Its parts include 29 capacitors, 19 ICs, 16 resistors, 10 diodes and 6 connectors.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 92 | kicad_mod:92 | U4, U5, U6, U7, U8, U9, U10, U13, U14, U15, U16, U17 |
| 11 | 1uF",CC0603KRX5R7BB105 | kicad_mod:C0603 | C6, C12, C18, C21, C22, C23, C24, C26, C28, C29, C30 |
| 7 | 10K","RC0603JR-0710KL | kicad_mod:R0603 | R1, R2, R6, R7, R8, R9, R12 |
| 6 | Fiducial | Fiducial:Fiducial_1mm_Mask2mm | FID1, FID2, FID3, FID4, FID5, FID6 |
| 6 | NSR0520V2","NSR0520V2 | Diode_SMD:D_SOD-523 | D1, D3, D4, D5, D6, D10 |
| 5 | 10uF","EMK212BJ106KG-T | kicad_mod:C0805 | C1, C2, C3, C4, C5 |
| 4 | 100R","301010090 | kicad_mod:R0603 | R3, R5, R13, R14 |
| 3 | 22R","22R | kicad_mod:R0603 | R16, R17, R18 |
| 3 | Conn_01x04 | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J1, J2, J4 |
| 3 | LM66100DCK | Package_TO_SOT_SMD:SOT-363_SC-70-6 | U1, U3, U18 |
| 3 | MBR0530 | Diode_SMD:D_SOD-123 | D7, D8, D9 |
| 2 | 100nF","CC0805KRX7R9BB104 | kicad_mod:C0805 | C7, C16 |
| 2 | 3.6pF","CBR06C369B5GAC | kicad_mod:C0603 | C10, C11 |
| 2 | 4.7uF","CL10A475KP8NNNC | kicad_mod:C0603 | C25, C33 |
| 2 | 47uF","MSASL21GBB5476MTNA01 | kicad_mod:C0805 | C13, C14 |
| 2 | 51pF","06031U510GAT2A | kicad_mod:C0603 | C8, C9 |
| 2 | CUHZ5V6_H3F","CUHZ5V6_H3F | kicad_mod:ZDO_30V_H3F_TOS | CR1, CR2 |
| 2 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J6, J7 |
| 2 | FDN304P","FDN304P | Package_TO_SOT_SMD:SOT-23 | Q3, Q4 |
| 2 | MountingHole_Pad_MP | MountingHole:MountingHole_2.7mm_M2.5_ISO14580_Pad | H1, H2 |
| 1 | 0.5pF","CBR06C508B5GAC | kicad_mod:C0603 | C20 |
| 1 | 1.5nH","LRC0603CS1N5GV001T | Inductor_SMD:L_0603_1608Metric | L2 |
| 1 | 100pF","CC0805JRNPO9BN101 | kicad_mod:C0805 | C15 |
| 1 | 1042240820","1042240820 | 1042240820:1042240820_MOL | U12 |
| 1 | 10uH","LSXND4040TKL100MDG | kicad_mod:IND_LSXN&slash_LSXP_4040TK_TAY | L6 |
| 1 | 2.2uH","DFE201612E-2R2M=P2 | OPL_Inductor:L0806 | L1 |
| 1 | 22pF","0805CG220J500NT | kicad_mod:C0805 | C17 |
| 1 | 267K","RK73H1JTTD2673F | kicad_mod:R0603 | R4 |
| 1 | 33nH","LRC0603CJ33NGV001T | Inductor_SMD:L_0603_1608Metric | L4 |
| 1 | 3R","3R | kicad_mod:R0603 | R15 |
| 1 | 6.8nH","LRC0402CJ6N8GV001T | Inductor_SMD:L_0603_1608Metric | L3 |
| 1 | BC660KGLAA-I03-SNASA","BC660KGLAA-I03-SNASA | bc660:BC66_QWS | U11 |
| 1 | BOOT | TestPoint:TestPoint_Pad_1.0x1.0mm | BOOT1 |
| 1 | FFC2B28-24-G | kicad_mod:GCT_FFC2B28-24-G | J3 |
| 1 | GSM_VCC | TestPoint:TestPoint_Pad_1.0x1.0mm | GSM_VCC1 |
| 1 | LOGO | kicad_mod:logo | G*** |
| 1 | NCP.5820","NCP.5820 | kicad_mod:NCP5820 | ANT1 |
| 1 | RESET | TestPoint:TestPoint_Pad_1.0x1.0mm | RESET1 |
| 1 | RxD | TestPoint:TestPoint_Pad_1.0x1.0mm | RxD1 |
| 1 | SI1308EDL","SI1308EDL | kicad_mod:MOSFET_8EDL-T1-GE3_VIS | Q8 |
| 1 | SP0504BAHTG","SP0504BAHTG | Package_TO_SOT_SMD:SOT-23-5 | D2 |
| 1 | TPS62840DLCR","TPS62840DLCR | KiCad_reg:SON50P150X200X100-8N-D | IC1 |
| 1 | TxD | TestPoint:TestPoint_Pad_1.0x1.0mm | TxD1 |
| 1 | VDD | TestPoint:TestPoint_Pad_1.0x1.0mm | VDD1 |
| 1 | W3102 | kicad_mod:IND_3102_PUL | L5 |
| 1 | XIAO","102010448 | kicad_mod:MOUDLE16P-SMD-2.54-21X17.8MM | U2 |
The 107 most common of 109 parts.
reparationchlorinateur/gree-bridge
ESP32-S3 board that goes inside a mini-split indoor unit, for Home Assistant and Apple Home (Matter). IR control and wall-remote feedback through the unit's own IR receiver line (most brands); indoor/outdoor bus readout…
bernardopg/ps28-modern-amp
Infinity Primus PS28 amplifier modernization: TPA3255 engineering, validation and safety-gated workflow
Allegra42/ZEReader-KiCad
ZEReader is an open source hardware and software E-Book Reader platform. Originally developed as a bachelor's thesis in electrical engineering, the project now evolves as a hobby initiative dedicated to further develop…
sandgum/Triangulate-ES_01-Watch
A 5mm thick smartwatch which uses an E-ink display and two OLEDs to display information while consuming very little power
V3n0m1010011010/E-Paper-Dev-Board
Eine kompakte, selbst entwickelte ESP32-S3-Platine für portable Anwendungen mit E-Paper-Display, microSD-Karte, Navigationstaster und LiPo-Akku.
It measures 128.2 × 61 mm and has 2 copper layers, 1.6 mm thick.
109 parts, built around the LM66100DCK, RC0603JR-0710KL, EMK212BJ106KG-T and ESR03EZPF1000. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the tdarcher/moistureiq_PCB repository on GitHub, at the commit this page was made from: the board is V3.kicad_pcb and its schematic V3.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask tdarcher before reusing the design.