
CerebroPlaca
Diego-Luna/Brain
Brain(Cerebro) es una placa de desarrollo, que cuenta con un EEG (electroencefalograma) que mediante electrodos medimos la actividad cerebral de 12 Hz - 30 Hz, que corresponde a la concentración, con el objetivo de…

Brain(Cerebro) es una placa de desarrollo, que cuenta con un EEG (electroencefalograma) que mediante electrodos medimos la actividad cerebral de 12 Hz - 30 Hz, que corresponde a la concentración, con el objetivo de…
CerebroPlaca is an open-source printed circuit board by Diego-Luna, from the Diego-Luna/Brain repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 54.3 × 47.8 mm with 52 parts on 98 nets, routed with 546 tracks and 32 vias.
It is built around the AP2112K-3.3 and AO3407A. Its parts include 22 capacitors, 11 resistors, 6 ICs, 3 diodes and 3 connectors.
Brain(Cerebro) es una placa de desarrollo, que cuenta con un EEG (electroencefalograma) que mediante electrodos medimos la actividad cerebral de 12 Hz - 30 Hz, que corresponde a la concentración, con el objetivo de utilizarlo como una herramienta de aprendizaje en distintas disciplinas que se puede llevar a cualquier parte para aprender mientras te diviertes. De igual manera se está desarrollando una plataforma para facilitar el uso y el aprendizaje con Brain.
Este desarollo es una colaboracion con Electronic cats (web) y MoonMakers (web) fue creada en la plataforma de Kicad 5.1

Usamos el microcontrolador nrf52840 en la forma E73-2G4M08S1C, está construido alrededor de la CPU ARM® Cortex ™ -M4 de 32 bits, tiene soporte de protocolo para Bluetooth 5, Bluetooth mesh, Thread, Zigbee, 802.15.4, ANT y pilas propietarias de 2.4 GHz. también tienen una resolución de 12 bits en puertos analogicos.

En la parte de los filtros EEG usamos el chip ads1294, cuenta con una resolución de 24 bits por canal, y hasta con 4 canales disponibles que pueden también usarse como un ECG (electrocardiograma)

| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 1uF | Capacitor_SMD:C_0805_2012Metric | C6, C7, C9, C12, C14, C15, C17 |
| 4 | 10uf | Capacitor_SMD:C_0805_2012Metric | C1, C3, C4, C10 |
| 3 | 0.1uF | Capacitor_SMD:C_0805_2012Metric | C8, C16, C18 |
| 3 | 10K | Resistor_SMD:R_0603_1608Metric | R2, R3, R6 |
| 3 | 10uF | Capacitor_SMD:C_0805_2012Metric | C20, C21, C22 |
| 2 | 100k | Resistor_SMD:R_0603_1608Metric | R5, R8 |
| 2 | 1k | Resistor_SMD:R_0603_1608Metric | R7, R9 |
| 2 | 2.2uF | Capacitor_SMD:C_0805_2012Metric | C2, C11 |
| 2 | 3.3uH | Inductor_SMD:L_7.3x7.3_H3.5 | L1, L2 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric | R10, R11 |
| 2 | LED | LED_SMD:LED_0603_1608Metric | D2, D3 |
| 2 | TPS73250DBVT | footprints:TPS73250DBVT | U1, U3 |
| 1 | 1.5nF | Capacitor_SMD:C_0805_2012Metric | C13 |
| 1 | 100pF | Capacitor_SMD:C_0805_2012Metric | C19 |
| 1 | 10uH | Inductor_SMD:L_7.3x7.3_H3.5 | L3 |
| 1 | 1M | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 1N5819 | Diode_SMD:D_SOD-123F | D1 |
| 1 | 22uF | Capacitor_SMD:C_0805_2012Metric | C5 |
| 1 | 32Khz | Crystal:Crystal_Round_D1.0mm_Vertical | Y1 |
| 1 | 4.7k | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | ADS1294 | ADS1294IPAG:ADS1294IPAG | U2 |
| 1 | AO3407A | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | AP2112K-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U5 |
| 1 | Conn_01x03_Male | Connector_PinHeader_1.00mm:PinHeader_1x03_P1.00mm_Vertical | J3 |
| 1 | E73-2G4M08S1C-52840 | nrfmicro:E73-2G4M08S1C | U6 |
| 1 | MCP73831-2-OT | Package_TO_SOT_SMD:SOT-23-5 | U4 |
| 1 | RESET | Button_Switch_SMD:SW_SPST_TL3342 | SW2 |
| 1 | SWD | Connector_PinHeader_1.00mm:PinHeader_1x04_P1.00mm_Vertical | J1 |
| 1 | Switch | nrfmicro:switch_MSK-12C02_smd | SW1 |
| 1 | USB_C_Receptacle_USB2.0 | nrfmicro:usb_type_c | J2 |

Diego-Luna/Brain
Brain(Cerebro) es una placa de desarrollo, que cuenta con un EEG (electroencefalograma) que mediante electrodos medimos la actividad cerebral de 12 Hz - 30 Hz, que corresponde a la concentración, con el objetivo de…

katetriestocode/trailmap
this is the working version! (disclaimer: no antenna as it has not delivered yet, so manual gps coords insertion for now!)


desanv01/Flight-Controller-V2
STM32H743 controller: regulated power, signal-only ESC, neutral ArduPilot firmware, manufacturing data and engineering history.

rahulkhedekar2005-sudo/usb-c-power-distribution-board
A beginner-friendly 4-layer USB-C Power Distribution Board designed in KiCad 10.




teapotlaboratories/bwlr1e
Teapotlabs BWLR1E: Wireless Environmental Sensor with Energy Harvesting from Solar Energy
It measures 54.3 × 47.8 mm and has 2 copper layers, 1.6 mm thick.
52 parts, built around the AP2112K-3.3 and AO3407A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Diego-Luna/Brain repository on GitHub, at the commit this page was made from: the board is CerebroPlacaFiltros/CerebroPlaca.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).