
Bwlr1e prog
teapotlaboratories/bwlr1e
Teapotlabs BWLR1E: Wireless Environmental Sensor with Energy Harvesting from Solar Energy

Teapotlabs BWLR1E: Wireless Environmental Sensor with Energy Harvesting from Solar Energy
Bwlr1e is an open-source printed circuit board by teapotlaboratories, from the teapotlaboratories/bwlr1e repository on GitHub, published under the MIT licence. It is a 2-layer board of 36.8 × 90.9 mm with 65 parts on 53 nets, routed with 392 tracks and 135 vias.
It is built around the KXOB25-05X3F-TB, BME688 and ANT-915-USP410, with the AO3407A and DMG1012UW among its other parts. Its parts include 15 capacitors, 11 resistors, 4 ICs, 3 inductors and 2 diodes. It belongs with the power and radio and wireless boards and the STM32 boards of this library.

Teapotlabs BWLR1E is a solar-powered wireless LoRa environmental sensor capable of sensing temperature, humidity, air pressure and air quality using the on-board BME688. With STM32WLE MCU as it's core and AEM10941 for solar charging, the device is capable of multi-year operation with the possibility of indefinite battery-life by utilizing the solar charging capability
Teapotlabs BWLR1E is part of Teapot open-hardware project.
The project won't be possible without the amazing work from people across the globe. The following are the reference to those awesome projects:


PCB Render
Built using KiCAD, the board is design to be as small as possible with all components placed on the top side of the PCB. The following are the lists of revision of the board:
The following design are based on the latest revision.
| Top Board | Bottom Board |
|---|---|
| |
| |
PCB Top and Bottom Layout

Built using TinkerCAD. The case are 3D printable with any generic 3D printer with/without support. The STL files are available here

Case Open
For adding additional sensors, Qwiic connector is also available on the left side of the board.

Connecting to Adafruit BME688
The case is design to be as small as possible with an additional magnets in the back to ease the placement of the sensor. The following are the list of material used at the time of testing:

Sensor Placement with Magnet
Power consumption and solar charging current are measured using Nordic PPK2 and CurrentRanger. The following are the summary of the measurement:
:warning: Tested on Revision 3, but should be similar to Revision 5

Deep-Sleep

BME688 Measure and LoRa Transmit
| Solar Charge - Direct Sunlight | Solar Charge - Indirect Sunlight |
|---|---|
| |
More measurement can be found here
Most of the components are generic and can be bought from any electornics/semi-conductor distributor. RAK3172 is the only component available in RAKwireless store. The bill of materials can be downloaded here
:warning: Be sure to buy the RAK3172 variant without IPEX to use the On-Board Antenna
:warning: Board can only be powered when LiPo battery is connected
Programming the device can be done over the UART2 or SWD, available on the right side of the board or uses the BWLR1E Programmer. Out of the factory, the RAK3172 chip ships with an AT firmware that can be tested by connecting a USB-to-UART bridge to the UART2 port.
The following are some very good tutorial to start developing with the device:
For connecting to the UART2 port, use any USB-to-UART bridge module. In testing, the Sparkfun board is used for communication with AT firmware and programming over Arduino.

Sparkfun USB-to-UART Bridge
:warning: Be sure to only use 3.3V module. Do not 5V module
Through UART2, user can program the device using the following SDK:
Other than Arduino RUI3 SDK, to program the device, user need to put the device in Serial Bootloader mode by,
BOOT and RESET buttonRESET buttonBOOT buttonYou can also use STM32CubeProgrammer , instead of the SDK to upload a firmware

Teapotlabs BWLR1E Programmer
An alternative to solder-free programming is to use the Teapotlabs BWLR1E Programmer. A full detail of the device can be found here. The programmer connects to UART2 of the device.
The product is open-source! However, some part of library used under src, might have it's own license. Please reach out or create a ticket to report any license violation.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 100n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C3, C5, C11, C12 |
| 4 | 10K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R3, R6, R7 |
| 4 | 10u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C8, C13, C14, C17 |
| 4 | KXOB25-05X3F | bwlr1e:KXOB25-05X3F | SC1, SC2, SC3, SC4 |
| 3 | 1K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5, R12, R13 |
| 2 | 1M | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R8, R9 |
| 2 | 47u | Capacitor_Tantalum_SMD:CP_EIA-3528-15_AVX-H_Pad1.50x2.35mm_HandSolder | C2, C4 |
| 2 | DNP | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C15, C16 |
| 1 | 0 | Inductor_SMD:L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | L1 |
| 1 | 10M | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4 |
| 1 | 10u | Capacitor_SMD:C_0603_1608Metric | C6 |
| 1 | 10u | Inductor_SMD:L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | L3 |
| 1 | 10u | bwlr1e:IND_LPS4012-103MRB | L2 |
| 1 | 22u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C7 |
| 1 | 3.7v LiPo | bwlr1e:JST_PH_S2B-PH-SM4-TB_1x02-1MP_P2.00mm_Horizontal | BT1 |
| 1 | 3V3 | TestPoint:TestPoint_Pad_D1.0mm | TP8 |
| 1 | 4.7M | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 1 | AEM10941 | Package_DFN_QFN:QFN-28-1EP_5x5mm_P0.5mm_EP3.35x3.35mm | U3 |
| 1 | ANT-915-USP410 | bwlr1e:XDCR_ANT-915-USP410 | E1 |
| 1 | AO3407A | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | BATT+ | TestPoint:TestPoint_Pad_D1.0mm | TP9 |
| 1 | BME688 | bwlr1e:BME680-PSON80P300X300X100-8N | U1 |
| 1 | BOOT | TestPoint:TestPoint_Pad_D1.0mm | TP14 |
| 1 | BOOT | Button_Switch_SMD:SW_SPST_TL3342 | SW4 |
| 1 | DMG1012UW | Package_TO_SOT_SMD:SOT-323_SC-70 | Q2 |
| 1 | GND | TestPoint:TestPoint_Pad_D1.0mm | TP7 |
| 1 | GREEN | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D2 |
| 1 | LIPO+ | TestPoint:TestPoint_Pad_D1.0mm | TP1 |
| 1 | LOGO | bwlr1e:TeapotLogo4mm | G*** |
| 1 | LOGO | bwlr1e:TeapotLogo | G*** |
| 1 | Qwiic | bwlr1e:JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J1 |
| 1 | RAK3172-T | bwlr1e:RAK3172 | U2 |
| 1 | RED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1 |
| 1 | RESET | Button_Switch_SMD:SW_SPST_TL3342 | SW3 |
| 1 | RST | TestPoint:TestPoint_Pad_D1.0mm | TP5 |
| 1 | RXD2 | TestPoint:TestPoint_Pad_D1.0mm | TP4 |
| 1 | SELMPP0 | Jumper:SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm_NumberLabels | JP3 |
| 1 | SELMPP1 | Jumper:SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm_NumberLabels | JP4 |
| 1 | SOLAR+ | TestPoint:TestPoint_Pad_D1.5mm | TP10 |
| 1 | SOLAR- | TestPoint:TestPoint_Pad_D1.5mm | TP11 |
| 1 | SWCLK | TestPoint:TestPoint_Pad_D1.0mm | TP6 |
| 1 | SWDIO | TestPoint:TestPoint_Pad_D1.0mm | TP3 |
| 1 | TXD2 | TestPoint:TestPoint_Pad_D1.0mm | TP2 |
| 1 | USER0 | Jumper:SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm | JP1 |
| 1 | USER1 | Jumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | JP2 |
| 1 | XC6215 | Package_TO_SOT_SMD:SOT-23-5 | U4 |
The 64 most common of 65 parts.

teapotlaboratories/bwlr1e
Teapotlabs BWLR1E: Wireless Environmental Sensor with Energy Harvesting from Solar Energy

teapotlaboratories/bwlr3d
Teapot BWLR3D: Asset Tracker and Environmental Sensor with Solar Energy Harvesting


CalgaryToSpace/CTS-SAT-1-Solar-Panels
Solar panel PCB designs for CTS-SAT-1

ivourshalldevour/bicycle_odometer
A repository to hold all the code written for the MSP430 microcontroller I used while building my energy harvesting powered bicycle odometer.



rajeev2705/PROJECTS
Welcome to my PCB projects repository! This space is dedicated to documenting my journey in designing, creating, and improving printed circuit boards (PCBs).

It measures 36.8 × 90.9 mm and has 2 copper layers, 1.6 mm thick.
65 parts, built around the KXOB25-05X3F-TB, BME688, ANT-915-USP410 and AO3407A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the teapotlaboratories/bwlr1e repository on GitHub, at the commit this page was made from: the board is hardware/main/kicad/bwlr1e.kicad_pcb and its schematic hardware/main/kicad/bwlr1e.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).